diff options
Diffstat (limited to 'system/printer-9nadel/1986/src/printer.epson.lq')
| -rw-r--r-- | system/printer-9nadel/1986/src/printer.epson.lq | 501 |
1 files changed, 501 insertions, 0 deletions
diff --git a/system/printer-9nadel/1986/src/printer.epson.lq b/system/printer-9nadel/1986/src/printer.epson.lq new file mode 100644 index 0000000..49d0624 --- /dev/null +++ b/system/printer-9nadel/1986/src/printer.epson.lq @@ -0,0 +1,501 @@ +PACKET epson lq printer
+
+(**************************************************************************)
+(* Stand : 29.07.86 *)
+(* EPSON LQ-1500 Version : 4 *)
+(* Autor : Rudolf Ruland *)
+(**************************************************************************)
+
+ DEFINES open,
+ close,
+ execute,
+
+ paper size,
+ std quality:
+
+LET
+(* underline = 1,
+ bold = 2,
+ italics = 4,
+ reverse = 8, *)
+
+ underline linetype = 1,
+
+ c document = 1,
+ c page = 2,
+
+ c write text = 1,
+ c write cmd = 2,
+ c carriage return = 3,
+ c move = 4,
+ c draw = 5,
+ c on = 6,
+ c off = 7,
+ c type = 8;
+
+INT VAR rest, high, low, factor;
+BOOL VAR is nlq, factor was 6, condensed;
+REAL VAR x size, y size;
+TEXT VAR std quality name, buffer;
+
+(*********************************************************************)
+
+paper size (13.6 * 2.54, 12.0 * 2.54);
+std quality ("draft");
+
+PROC paper size (REAL CONST x, y) :
+
+ x size := x;
+ y size := y;
+
+END PROC paper size;
+
+PROC paper size :
+
+ line;
+ putline ("Papierbreite = " + text (x size, 5, 2) + " cm = " + text (x size / 2.54, 5, 2) + " Zoll");
+ putline ("Papierlaenge = " + text (y size, 5, 2) + " cm = " + text (y size / 2.54, 5, 2) + " Zoll");
+
+END PROC paper size;
+
+
+PROC std quality (TEXT CONST quality) :
+
+ IF quality = "nlq" OR quality = "draft"
+ THEN std quality name := quality;
+ ELSE errorstop ("unzulaessige Betriebsart")
+ FI;
+
+END PROC std quality;
+
+TEXT PROC std quality : std quality name END PROC std quality;
+
+(*********************************************************************)
+
+PROC open (INT CONST op code, INT VAR param1, param2) :
+
+SELECT op code OF
+ CASE c document : open document
+ CASE c page : open page
+END SELECT;
+
+
+. x steps : param1
+. y steps : param2
+.
+ open document :
+ IF pos (material, "nlq") <> 0
+ THEN is nlq := TRUE;
+ ELIF pos (material, "draft") <> 0
+ THEN is nlq := FALSE;
+ ELSE is nlq := std quality = "nlq"
+ FI;
+ factor := 0;
+ factor was 6 := FALSE;
+ condensed := FALSE;
+ x steps := x step conversion ( x size );
+ y steps := y step conversion ( y size );
+ y steps := (y steps DIV 30) * 30;
+ out (""27""64""); (* Reset des Druckers *)
+ out (""27"R"0""); (* Amerikanischer Zeichensatz *)
+ out (""27"C" + code (y steps DIV 30)); (* Formularlaenge *)
+ out (""27"x"0""); (* Entwurfsqualit„t *)
+
+
+. x start : param1
+. y start : param2
+.
+ open page :
+ x start := 0;
+ y start := 0;
+ rest := 0;
+ out (""13"");
+
+END PROC open;
+
+
+PROC close (INT CONST op code, INT CONST param1) :
+
+SELECT op code OF
+ CASE c document : close document
+ CASE c page : close page
+END SELECT;
+
+.
+ close document :
+
+
+. remaining y steps : param1
+.
+ close page :
+ IF remaining y steps > 0 THEN out (""12"") FI
+
+END PROC close;
+
+
+PROC execute (INT CONST op code, TEXT CONST string, INT CONST param1, param2) :
+
+SELECT op code OF
+ CASE c write text : write text
+ CASE c write cmd : write cmd
+ CASE c carriage return : carriage return
+ CASE c move : move
+ CASE c draw : draw
+ CASE c on : on
+ CASE c off : off
+ CASE c type : type
+END SELECT
+
+
+. from : param1
+. to : param2
+.
+ write text :
+ out subtext (string, from, to)
+
+.
+ write cmd :
+ buffer := subtext (string, from, to);
+ IF buffer = "nlq"
+ THEN is nlq := TRUE;
+ near letter quality;
+ ELIF buffer = "draft"
+ THEN is nlq := FALSE;
+ draft quality;
+ ELSE out (buffer);
+ FI;
+
+ . near letter quality :
+ IF factor = 6
+ THEN factor was 6 := TRUE;
+ factor := 4;
+ ELSE factor was 6 := FALSE;
+ FI;
+ IF condensed
+ THEN out (""27"x"0"")
+ ELSE out (""27"x"1"")
+ FI;
+
+ . draft quality :
+ IF factor was 6
+ THEN factor was 6 := FALSE;
+ factor := 6;
+ FI;
+ out (""27"x"0"");
+
+
+(*. x steps to left margin : param1*)
+.
+ carriage return :
+ rest := 0;
+ out (""13"");
+
+
+. x steps : param1
+. y steps : param2
+.
+ move :
+ IF x steps < 0 OR y steps < 0
+ THEN stop
+ ELIF x steps > 0
+ THEN x move
+ ELIF y steps > 0
+ THEN y move
+ FI;
+
+ . x move :
+ high := (x steps + rest) DIV factor;
+ rest := (x steps + rest) MOD factor;
+ out (""27"\");
+ out (code (high MOD 256));
+ out (code (high DIV 256));
+
+ . y move :
+ high := y steps DIV 255;
+ low := y steps MOD 255;
+ IF high > 0 THEN high TIMESOUT ""27"J"255"" FI;
+ IF low > 0 THEN out (""27"J"); out (code (low)) FI;
+
+.
+ draw :
+ IF x steps < 0 OR y steps <> 0 OR linetype <> underline linetype
+ THEN stop
+ ELIF x steps > 0
+ THEN x draw
+ FI;
+
+ . x draw :
+ high := (x steps + rest) DIV 6;
+ rest := (x steps + rest) MOD 6;
+ IF high > 0
+ THEN low := high MOD 255;
+ high := high DIV 255;
+ out (""27"V");
+ out (code (low));
+ out (""27"*"1""1""0""1""27"V"0"");
+ FOR low FROM 1 UPTO high
+ REP out (""27"V"255""27"*"1""1""0""1""27"V"0"") PER;
+ FI;
+
+
+. modification : param1
+.
+ on :
+ IF on string (modification) <> ""
+ THEN out (on string (modification))
+ ELSE stop
+ FI
+
+.
+ off :
+ IF off string (modification) <> ""
+ THEN out (off string (modification))
+ ELSE stop
+ FI
+
+
+. font nr : param1
+.
+ type :
+ buffer := font string (font nr);
+ out (buffer);
+ factor := pitch factor;
+ IF is nlq THEN near letter quality FI;
+
+ . pitch factor : (* Mikroschritt *)
+ INT CONST font bits := code (buffer SUB 3);
+ IF bit (font bits, 1)
+ THEN condensed := FALSE; 2 (* proportional 1/360 Inch *)
+ ELIF pos (buffer, ""27"x"1"") <> 0
+ THEN condensed := FALSE; 4 (* near letter 1/180 Inch *)
+ ELIF bit (font bits, 2)
+ THEN condensed := TRUE; 3 (* condensed 1/240 Inch *)
+ ELIF bit (font bits, 0)
+ THEN condensed := FALSE; 4 (* elite 1/180 Inch *)
+ ELSE condensed := FALSE; 6 (* pica 1/120 Inch *)
+ FI
+
+END PROC execute;
+
+
+END PACKET epson lq printer;
+
+
+PACKET print cmd for single user (* Autor : Rudolf Ruland *)
+ (* Stand : 18.02.86 *)
+ DEFINES print,
+ print channel :
+
+INT VAR pr channel;
+TEXT VAR buffer;
+FILE VAR print file;
+
+BOOL CONST multi user := (pcb (9) AND 255) <> 1;
+
+
+PROC print channel (INT CONST channel) :
+
+ IF multi user THEN do ("serverchannel(" + text (channel) + ")" ) FI;
+ pr channel := channel;
+
+END PROC print channel;
+
+INT PROC print channel : pr channel END PROC print channel;
+
+
+PROC print :
+
+ print (last param)
+
+ENDPROC print ;
+
+PROC print (TEXT CONST file name) :
+
+ INT CONST myself channel := channel (myself);
+ last param (file name) ;
+ print file := sequential file (input, file name) ;
+ continue (print channel) ;
+ disable stop ;
+ execute print ;
+ remember error message if neccessary;
+ IF multi user THEN do ("break (quiet)") FI;
+ continue (myself channel);
+ clear error;
+ put error message if neccessary;
+
+ . remember error message if neccessary :
+ IF is error
+ THEN buffer := error message;
+ clear error;
+ ELSE buffer := "";
+ FI;
+
+ . put error message if neccessary :
+ IF buffer <> "" THEN errorstop (buffer) FI;
+
+ENDPROC print ;
+
+PROC execute print :
+
+ enable stop ;
+ print (print file,
+ PROC (INT CONST, INT VAR, INT VAR) open,
+ PROC (INT CONST, INT CONST) close,
+ PROC (INT CONST, TEXT CONST, INT CONST, INT CONST) execute);
+
+ENDPROC execute print ;
+
+ENDPACKET print cmd for single user;
+
+#page#
+(******************************************************************)
+(*** ***)
+(*** Generierung des Printers ***)
+(*** ***)
+(******************************************************************)
+
+LET printer name = "printer.epson.lq",
+ up = ""3""13""5"";
+
+TEXT VAR fonttab name := "fonttab.epson.lq";
+
+BOOL CONST multi user := (pcb (9) AND 255) <> 1;
+
+INT VAR pr channel;
+TEXT VAR buffer;
+
+command dialogue (TRUE);
+ask for print channel;
+ask for paper format;
+ask for print quality;
+load font table;
+forget (printer name, quiet);
+IF multi user THEN generate printer spool FI;
+check on;
+.
+ ask for print channel :
+ line;
+ put ("gib Druckerkanal:");
+ get (pr channel);
+ print channel (pr channel);
+ line;
+.
+ ask for paper format :
+ SELECT paper format OF
+ CASE 1 : papersize ( 8.0 * 2.54, 12.0 * 2.54)
+ CASE 2 : papersize (13.2 * 2.54, 12.0 * 2.54)
+ CASE 3 : papersize (21.0, 29.7)
+ END SELECT
+
+ . paper format :
+ line;
+ REP out (up);
+ IF yes ("Papierformat : endlos, 8 Zoll breit")
+ THEN LEAVE paper format WITH 1 FI;
+ out (up);
+ IF yes ("Papierformat : endlos, 13.2 Zoll breit")
+ THEN LEAVE paper format WITH 2 FI;
+ out (up);
+ IF yes ("Papierformat : DINA 4")
+ THEN LEAVE paper format WITH 3 FI;
+ PER;
+ 0
+.
+ ask for print quality :
+ line;
+ std quality (quality);
+
+ . quality :
+ REP out (up);
+ IF yes ("standardm„áige Druckqualit„t : draft quality")
+ THEN LEAVE quality WITH "draft" FI;
+ out (up);
+ IF yes ("standardm„áige Druckqualit„t : near letter quality")
+ THEN LEAVE quality WITH "nlq" FI;
+ PER;
+ ""
+.
+ load font table :
+ IF NOT exists (fonttab name)
+ THEN command dialogue (TRUE);
+ REP line (2);
+ putline ("Bitte Archiv mit der Fonttabelle """ +
+ fonttab name + """ einlegen!");
+ line;
+ UNTIL yes ("Archiv eingelegt") PER;
+ reserve archive;
+ fetch (fonttab name, archive);
+ release (archive);
+ FI;
+ font table (fonttab name);
+ IF multi user
+ THEN command dialogue (FALSE);
+ do ("save(""" + font tab name + """,task(""configurator""))")
+ FI;
+ forget (fonttab name, quiet);
+
+ . reserve archive :
+ INT VAR p1, p2;
+ archive (" "31" ");
+ disable stop;
+ list (archive);
+ IF is error
+ THEN buffer := errormessage;
+ p1 := pos (buffer, """", 1 ) + 1;
+ p2 := pos (buffer, """", p1) - 1;
+ IF p1 > 0 AND p2 > 0
+ THEN clear error;
+ buffer := subtext (buffer, p1, p2);
+ archive (buffer);
+ FI;
+ FI;
+ enable stop;
+
+. generate printer spool :
+ eumel must advertise;
+ cursor (1, 12);
+ putline ("In allen bestehenden Tasks - insbesondere in der Task ""PUBLIC"" - muá");
+ putline ("die Fonttabelle mit dem Kommando");
+ line;
+ putline (" font table (""" + font tab name + """)");
+ line;
+ putline ("eingestellt werden!!!");
+ line (4);
+ putline ("Generierung beendet, weiter mit 'SV'");
+ generate printer server;
+ do (buffer);
+
+. generate printer server :
+ buffer := "break (quiet);";
+ buffer CAT "spool manager (PROC printer);";
+ buffer CAT "INT VAR reply; DATASPACE VAR ds; FILE VAR file;";
+ buffer CAT "PROC printer:";
+ buffer CAT " disable stop;";
+ buffer CAT " continue (server channel);";
+ buffer CAT " check error (error message);";
+ buffer CAT " ds := nilspace;";
+ buffer CAT " REP forget (ds);";
+ buffer CAT " execute print;";
+ buffer CAT " IF is error AND online THEN put error; clear error; FI;";
+ buffer CAT " PER;";
+ buffer CAT "END PROC printer;";
+ buffer CAT "PROC execute print:";
+ buffer CAT " LET ack = 0, fetch code = 11, file type = 1003;";
+ buffer CAT " enable stop;";
+ buffer CAT " ds := nilspace;";
+ buffer CAT " call (father, fetch code, ds, reply);";
+ buffer CAT " IF reply = ack CAND type (ds) = file type";
+ buffer CAT " THEN file := sequential file (input, ds);";
+ buffer CAT " print (file,";
+ buffer CAT " PROC (INT CONST, INT VAR, INT VAR) open,";
+ buffer CAT " PROC (INT CONST, INT CONST) close,";
+ buffer CAT " PROC (INT CONST, TEXT CONST, INT CONST, INT CONST) execute);";
+ buffer CAT " FI;";
+ buffer CAT "END PROC execute print;";
+ buffer CAT "PROC check error(TEXT CONST message):";
+ buffer CAT " IF is error";
+ buffer CAT " THEN clear error; rename myself (message);";
+ buffer CAT " IF is error THEN end(myself) FI;";
+ buffer CAT " pause (9000); end(myself);";
+ buffer CAT " FI;";
+ buffer CAT "END PROC check error;";
|