diff options
Diffstat (limited to 'system/printer-laser/4/src/printer.kyocera.f-1010')
| -rw-r--r-- | system/printer-laser/4/src/printer.kyocera.f-1010 | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/system/printer-laser/4/src/printer.kyocera.f-1010 b/system/printer-laser/4/src/printer.kyocera.f-1010 new file mode 100644 index 0000000..a46f7b3 --- /dev/null +++ b/system/printer-laser/4/src/printer.kyocera.f-1010 @@ -0,0 +1,373 @@ +PACKET kyocera f 1010 printer + +(**************************************************************************) +(* Stand : 03.12.86 *) +(* KYOCERA F - 1010 Verison : 4 *) +(* Autor : Rudolf Ruland *) +(**************************************************************************) + +(**************************************************************************) +(* Hinweis : Die 'time-out' Zeit, nach der der Eingabepuffer ausgegeben *) +(* wird, wenn keine Eingabe mehr erfolgt, sollte moeglichst *) +(* gross gewaehlt werden, *) +(* z.B. mit FRPO H9, 60; wird sie auf 5 Min. gesetzt *) +(**************************************************************************) + + + DEFINES open, + close, + execute, + + paper size : + +LET underline = 1, +(* bold = 2, + italics = 4, + reverse = 8, + + underline linetype = 1, *) + + c document = 1, + c page = 2, + + c write text = 1, + c write cmd = 2, + c carriage return = 3, + c move = 4, + c draw = 5, + c on = 6, + c off = 7, + c type = 8; + +INT VAR blankpitch, high, low; +REAL VAR x size, y size; +BOOL VAR is landscape, is underline; + +(*********************************************************************) + +paper size (21.0, 29.7); + +PROC paper size (REAL CONST x, y) : + + x size := x; + y size := y; + +END PROC paper size; + +PROC paper size : + + line; + putline ("Papierbreite = " + text (x size, 5, 2) + " cm = " + text (x size / 2.54, 5, 2) + " Zoll"); + putline ("Papierlaenge = " + text (y size, 5, 2) + " cm = " + text (y size / 2.54, 5, 2) + " Zoll"); + +END PROC paper size; + +(*********************************************************************) + +PROC open (INT CONST op code, INT VAR param1, param2) : + +SELECT op code OF + CASE c document : open document + CASE c page : open page +END SELECT; + + +. x steps : param1 +. y steps : param2 +. + open document : + out ("!"82"! RES; UNIT D; EXIT;"); (* Reset des Druckers *) + IF pos (material, "landscape") > 0 OR pos (material, "quer") > 0 + THEN is landscape := TRUE; + x steps := x step conversion ( y size ); + y steps := y step conversion ( x size ); + out (""27"&l1O"); + ELSE is landscape := FALSE; + x steps := x step conversion ( x size ); + y steps := y step conversion ( y size ); + FI; + is underline := FALSE; + IF y size < 29.7 OR x size < 21.0 + THEN out ("!"82"! SLM "); + IF is landscape + THEN out (text (x step conversion (29.7 - y size))); + out ("; STM "); + out (text (y step conversion ((21.0 - x size) * 0.5))); + ELSE out (text (x step conversion ((21.0 - x size) * 0.5))); + FI; + out ("; EXIT;"); + FI; + +. x start : param1 +. y start : param2 +. + open page : + out ("!"82"! MZP 0, 0; EXIT;"); (* Positionierung zum Nullpunkt *) + IF is landscape + THEN x start := x step conversion (0.19); + y start := y step conversion (0.70); + ELSE x start := x step conversion (0.56); + y start := y step conversion (0.60); + FI; + IF pos (material, "tray") > 0 + THEN out (""27"&l1H"); + ELIF pos (material, "manual") > 0 + THEN out (""27"&l2H"); + FI; + out (""13""); + +END PROC open; + + +PROC close (INT CONST op code, INT CONST param1) : + +SELECT op code OF + CASE c document : close document + CASE c page : close page + OTHERWISE : put (param1) +END SELECT; + +. + close document : + + +(*. remaining y steps : param1*) +. + close page : + out (""12""); + +END PROC close; + + +PROC execute (INT CONST op code, TEXT CONST string, INT CONST param1, param2) : + +SELECT op code OF + CASE c write text : write text + CASE c write cmd : write cmd + CASE c carriage return : carriage return + CASE c move : move + CASE c draw : draw + CASE c on : on + CASE c off : off + CASE c type : type +END SELECT + + +. from : param1 +. to : param2 +. + write text : + out subtext (string, from, to) + +. + write cmd : + out subtext (string, from, to) + + +(*. x steps to left margin : param1*) +. + carriage return : + out (""13"") + + +. x steps : param1 +. y steps : param2 +. + move : + IF x steps > 0 + THEN IF is underline + THEN underline x move + ELSE out (""27"*p+" + text (x steps) + "X"); + FI; + ELIF x steps < 0 + THEN out (""27"*p" + text (x steps) + "X"); + ELIF y steps > 0 + THEN out (""27"*p+" + text (y steps) + "Y"); + ELIF y steps < 0 + THEN out (""27"*p" + text (y steps) + "Y"); + FI; + + . underline x move : + high := x steps DIV blankpitch; + low := x steps MOD blankpitch; + IF high > 0 THEN high TIMESOUT " " FI; + IF low > 0 THEN out (" "27"*p" + text (low - blank pitch) + "X") FI; + +. + draw : + stop + + +. modification : param1 +. + on : + IF on string (modification) <> "" + THEN out (on string (modification)); + IF modification = underline THEN is underline := TRUE FI; + ELSE stop + FI + +. + off : + IF off string (modification) <> "" + THEN out (off string (modification)); + IF modification = underline THEN is underline := FALSE FI; + ELSE stop + FI + + +. font nr : param1 +. + type : + out (font string (font nr)); + blankpitch := char pitch (font nr, " "); + +END PROC execute; + + +END PACKET kyocera f 1010 printer; + + + +#page# +(******************************************************************) +(*** ***) +(*** Generierung des Printers ***) +(*** ***) +(******************************************************************) + +LET printer name = "printer.kyocera.f-1010"; + +TEXT VAR fonttab name := "fonttab.kyocera.f-1010"; + +BOOL CONST multi user := (pcb (9) AND 255) <> 1; + +INT VAR pr channel; +TEXT VAR buffer; + +command dialogue (TRUE); +IF NOT multi user + THEN errorstop ("Dieser Treiber arbeitet nur mit Multi-Tasking-EUMEL") +FI; +ask for print channel; +dynamic font hint; +load font table; +forget (printer name, quiet); +IF multi user THEN generate printer spool FI; +check on; +command dialogue (TRUE); +. + ask for print channel : + line; + put ("gib Druckerkanal:"); + get (pr channel); + do ("serverchannel(" + text (pr channel) + ")" ) ; + line; +. + dynamic font hint : + line (3); + putline (""4"Hinweis zur Benutzung der dynamischen Schrifttypen:"); + line; + putline (" In der Fonttabelle """ + fonttab name + """ sind einige dynamische"); + putline (" Schrifttypen angepaßt. Diese müssen nach jedem Einschalten des"); + putline (" Druckers neu generiert werden."); + putline (" Zur Generierung dieser Schrifttypen befinden sich auf dem Standard-"); + putline (" archive die folgenden Dateien:"); + line; + putline (" ""genfont.kyocera.f-1010.dynamic1"""); + putline (" ""genfont.kyocera.f-1010.dynamic2"""); + line; + putline (" Nach Einschalten des Druckers müssen diese Dateien zuerst ausgedruckt"); + putline (" werden."); + putline (" Die Generierung benötigt pro Schriftart etwa 15 Minuten."); + line (2); + putline ("Weiter nach Eingabe einer Taste"); + pause; +. + load font table : + IF NOT exists (fonttab name) + THEN REP line (2); + putline ("Bitte Archiv mit der Fonttabelle """ + + fonttab name + """ einlegen!"); + line; + UNTIL yes ("Archiv eingelegt") PER; + reserve archive; + fetch (fonttab name, archive); + release (archive); + FI; + font table (fonttab name); + IF multi user + THEN command dialogue (FALSE); + do ("save(""" + font tab name + """,task(""configurator""))") + FI; + forget (fonttab name, quiet); + + . reserve archive : + INT VAR p1, p2; + archive (" "31" "); + disable stop; + list (archive); + IF is error + THEN buffer := errormessage; + p1 := pos (buffer, """", 1 ) + 1; + p2 := pos (buffer, """", p1) - 1; + IF p1 > 0 AND p2 > 0 + THEN clear error; + buffer := subtext (buffer, p1, p2); + archive (buffer); + FI; + FI; + enable stop; + +. generate printer spool : + eumel must advertise; + cursor (1, 12); + putline ("In allen bestehenden Tasks - insbesondere in der Task ""PUBLIC"" - muß"); + putline ("die Fonttabelle mit dem Kommando"); + line; + putline (" font table (""" + font tab name + """)"); + line; + putline ("eingestellt werden!!!"); + line (4); + putline ("Generierung beendet, weiter mit 'SV'"); + generate printer server; + do (buffer); + +. generate printer server : + buffer := "break (quiet);"; + buffer CAT "spool manager (PROC printer);"; + buffer CAT "INT VAR reply; DATASPACE VAR ds; FILE VAR file;"; + buffer CAT "PROC printer:"; + buffer CAT " disable stop;"; + buffer CAT " continue (server channel);"; + buffer CAT " check error (error message);"; + buffer CAT " ds := nilspace;"; + buffer CAT " REP forget (ds);"; + buffer CAT " execute print;"; + buffer CAT " IF is error AND online"; + buffer CAT " THEN out (""""27""(8U""27""(s0p10h12v0s0b3T"");"; + buffer CAT " put error; clear error; out (""""12"""");"; + buffer CAT " FI;"; + buffer CAT " PER;"; + buffer CAT "END PROC printer;"; + buffer CAT "PROC execute print:"; + buffer CAT " LET ack = 0, fetch code = 11, file type = 1003;"; + buffer CAT " enable stop;"; + buffer CAT " ds := nilspace;"; + buffer CAT " call (father, fetch code, ds, reply);"; + buffer CAT " IF reply = ack CAND type (ds) = file type"; + buffer CAT " THEN file := sequential file (input, ds);"; + buffer CAT " print (file,"; + buffer CAT " PROC (INT CONST, INT VAR, INT VAR) open,"; + buffer CAT " PROC (INT CONST, INT CONST) close,"; + buffer CAT " PROC (INT CONST, TEXT CONST, INT CONST, INT CONST) execute);"; + buffer CAT " FI;"; + buffer CAT "END PROC execute print;"; + buffer CAT "PROC check error(TEXT CONST message):"; + buffer CAT " IF is error"; + buffer CAT " THEN clear error; rename myself (message);"; + buffer CAT " IF is error THEN end(myself) FI;"; + buffer CAT " pause (9000); end(myself);"; + buffer CAT " FI;"; + buffer CAT "END PROC check error;"; + |