PACKET eumel coder (* Autor: U. Bartling *) DEFINES coder on, coder off, declare, define, apply, identify, :=, =, dump, LABEL, gosub, goret, complement condition code, ADDRESS , GLOB, LOC, REF, DEREF, ref length, +, adjust, is global, is local, is ref, DTYPE, type class, type name, void type, int type, real type, text type, bool type, dataspace type, undefined type, row type, struct type, proc type, end type, OPN, set length of local storage, begin module, end module, is proc, is eumel 0 instruction, address, operation, nop, init op codes, mnemonic, parameter, next param, NEXTPARAM, access , dtype , param address, same type , reserve storage, allocate denoter , allocate variable, data allocation by coder , data allocation by user, run, run again, insert, prot, prot off, check, check on, check off, help, bulletin, packets : (**************************************************************************) (* *) (* E U M E L - C O D E R *) (* *) (* *) (* Zur Beschreibung des Coders siehe *) (* U.Bartling, J. Liedtke: EUMEL-Coder-Interface *) (* *) (* Stand der Dokumentation : 13.02.1986 *) (* Stand der Implementation : 21.03.1986 *) (* *) (* *) (**************************************************************************) (***** Globale Variable *****) TEXT VAR object name; FILE VAR bulletin file; INT VAR memory management mode, global address offset, hash table pointer, nt link, permanent pointer, param link, index, mode, field pointer, word, number of errors := 0 ; BOOL VAR found, end of params; #page# (**************************************************************************) (* *) (* 1. Interface zum ELAN-Compiler 12.03.1986 *) (* 1.7.5.4 *) (* *) (* Beschreibung der Tabellen (-groessen), *) (* internen Vercodung von Typen *) (* und Kennungen . *) (* Initialisieren und Beenden des Compilers, *) (* Lesen aus und Schreiben in Namens- bzw. Permanent-Tabelle *) (* *) (**************************************************************************) LET begin of hash table = 0 , end of hash table = 1023 , begin of permanent table = 22784 , before first pt entry = 22784 , first permanent entry = 22785 , end of permanent table = 32767 , wordlength = 1 , (* compile u n d run time *) two word length = 2 , three word length = 3 , four word length = 4 , permanent param const = 10000 , permanent param var = 20000 , permanent proc op = 30000 , permanent type = 30000 , permanent row = 10 , permanent struct = 11 , permanent param proc = 12 , (* permanent param proc end marker = 0 , *) permanent type field = 0 , ptt limit = 10000 , begin of pt minus ptt limit = 12784 , offset to row size = 12785 , void = 0 , int = 1 , real = 2 , string = 3 , bool = 5 , bool result = 6 , dataspace = 7 , undefined = 9 , row = 10 , struct = 11 , end = 0 , const = 1 , var = 2 , (* proc = 3 , *) (* denoter = 5 , *) bold = 2 , ins = TRUE , no ins = FALSE , no lst = FALSE , sermon = TRUE , no sermon = FALSE , run again mode = 0 , compile file mode = 1 , prep coder mode = 5 , warning message = 2 , error message = 4 , point line = "..............." ; INT CONST permanent packet := -2 , permanent end := -3 ; BOOL VAR coder active := FALSE ; INT VAR run again mod nr := 0 ; (***** Start/Ende *****) LET invalid coder off = "CODER not active" ; PROC coder on (INT CONST data allocation mode) : mark coder on ; init memory management ; init opn section ; init compiler . mark coder on : coder active := TRUE . init memory management : memory management mode := data allocation mode ; prep pbase (global address offset) . init compiler : no do again ; elan (prep coder mode, bulletin file, "", run again mod nr, no ins, no lst, check option, no sermon) ENDPROC coder on; PROC coder off (BOOL CONST insert, sermon, OPN CONST start proc) : IF coder active THEN mark coder off ; end coder (insert, sermon, start mod nr if no insert) ELSE errorstop (invalid coder off) FI . start mod nr if no insert : IF insert THEN run again mod nr := 0 ELSE run again mod nr := start proc.mod nr FI ; run again mod nr . mark coder off : reset memory management mode ; init opn section ; coder active := FALSE ENDPROC coder off ; PROC end coder (BOOL CONST insert wanted, sermon wanted, INT CONST mod) : EXTERNAL 10021 ENDPROC end coder ; PROC elan (INT CONST mode, FILE VAR source, TEXT CONST line, INT VAR start module number, BOOL CONST ins, lst, rtc, ser) : EXTERNAL 256 ENDPROC elan ; (***** Hash/Namenstabelle *****) . next hash entry : hash table pointer INCR wordlength . end of hash table reached : hash table pointer > end of hash table . yet another nt entry : nt link := cdb int (nt link) ; nt link <> 0 . ; PROC declare object (TEXT CONST name, INT VAR nt link, pt pointer) : EXTERNAL 10031 ENDPROC declare object ; PROC to object (TEXT CONST searched object) : hash ; search nt entry . hash : hash code := 0 ; FOR index FROM 1 UPTO LENGTH searched object REP addmult cyclic ENDREP . addmult cyclic : hash code INCR hash code ; IF hash code > end of hash table THEN wrap around FI ; hash code := (hash code + code (searched object SUB index)) MOD 1024 . wrap around : hash code DECR end of hash table . hash code : nt link . search nt entry : found := FALSE ; WHILE yet another nt entry REP read current entry ; IF object name = searched object THEN found := TRUE ; LEAVE to object FI PER . read current entry : permanent pointer := cdb int (nt link + wordlength) ; object name := cdb text (nt link + two word length) ENDPROC to object ; (***** Permanent Tabelle *****) . next procedure : permanent pointer := cdb int (permanent pointer) . ; PROC next pt param : mode := cdb int (param link) MOD ptt limit ; param link INCR wordlength ; IF mode = permanent row THEN skip over permanent row ELIF mode = permanent struct THEN skip over permanent struct FI ; set end marker if end of list . skip over permanent row : param link INCR wordlength ; next pt param . skip over permanent struct : REP next pt param ; mode := cdb int (param link) UNTIL mode = permanent type field PER ; param link INCR wordlength ENDPROC next pt param ; PROC set end marker if end of list : mode := cdb int (param link) ; end of params := mode >= permanent proc op OR mode <= 0 ENDPROC set end marker if end of list ; PROC get type and mode (INT VAR type) : mode := cdb int (param link) ; IF mode = permanent param proc THEN type of param proc ELSE type of object FI . type of param proc : param link INCR wordlength ; get type and mode (type) ; mode := permanent param proc . type of object : IF mode < 0 THEN type := 2769 + (32767 + mode) ; mode := 0 ELSE type := mode MOD ptt limit ; mode DECR type ; translate type if necessary ; translate mode if necessary FI . translate type if necessary : IF permanent row or struct THEN translate type FI . translate type : type := param link - begin of pt minus ptt limit . translate mode if necessary : IF mode = permanent param const THEN mode := const ELIF mode = permanent param var THEN mode := var FI . permanent row or struct : type = permanent row OR type = permanent struct ENDPROC get type and mode ; (***** Allgemeine Zugriffsprozeduren *****) INT PROC cdb int (INT CONST index) : EXTERNAL 116 ENDPROC cdb int ; TEXT PROC cdb text (INT CONST index) : EXTERNAL 117 ENDPROC cdb text ; #page# (**************************************************************************) (* *) (* 2. Spruenge und Marken 07.03.1986 *) (* *) (* Definition des Datentyps LABEL *) (* *) (* Deklaration, Definition und Applikation von Marken *) (* *) (**************************************************************************) TYPE LABEL = INT ; BOOL VAR invers :: FALSE ; PROC declare (LABEL VAR label) : CONCR (label) := 0 ENDPROC declare ; PROC define (LABEL VAR label) : EXTERNAL 10084 ENDPROC define ; PROC complement condition code : invers := TRUE ENDPROC complement condition code ; PROC apply (LABEL VAR label) : EXTERNAL 10149 ENDPROC apply ; PROC apply (LABEL VAR label, BOOL CONST condition) : IF condition xor invers THEN branch true (label) ELSE branch false (label) FI ; invers := FALSE . condition xor invers : IF condition THEN NOT invers ELSE invers FI ENDPROC apply ; OP := (LABEL VAR global label, local label) : (* EQUATE ! *) EXTERNAL 10014 ENDOP := ; TEXT PROC dump (LABEL CONST label) : "LAB " + text (CONCR (label)) ENDPROC dump ; PROC gosub (LABEL VAR label) : EXTERNAL 10015 ENDPROC gosub ; PROC goret : s0 (q goret code) ENDPROC goret ; PROC branch true (LABEL VAR label) : EXTERNAL 10028 ENDPROC branch true ; PROC branch false (LABEL VAR label) : EXTERNAL 10029 ENDPROC branch false ; #page# (**************************************************************************) (* *) (* 3. Datenaddressen 21.03.1986 *) (* *) (* Definition des Datentyps ADDRESS *) (* *) (* Aufbau von Datenaddressen (Vercodung) *) (* Fortschalten und Ausrichten von Adressen *) (* Bereitstellen der Fehlermeldung "address overflow" (Coder-intern) *) (* *) (**************************************************************************) TYPE ADDRESS = STRUCT (INT kind, value) ; LET global = 0 , local = 1 , ref mask = 2 , global ref = 2 , local ref = 3 , module nr = 4 , immediate value = 5 , eumel0 stack offset = 4 , local address limit = 16 384 , illegal ref operation = "REF not allowed" , deref on non ref = "DEREF on non-ref address" , global ref not allowed = "GLOBAL REF not allowed" , unknown kind = "Unknown address kind" , address overflow = "Address Overflow" , illegal plus operation = "+ not allowed" ; ADDRESS VAR result addr; INT CONST ref length :: 2 ; OP := (ADDRESS VAR l, ADDRESS CONST r) : CONCR (l) := CONCR (r) ENDOP := ; ADDRESS OP GLOB (INT CONST address level) : result addr.kind := global ; result addr.value := address level ; IF memory management mode = data allocation by user THEN result addr.value INCR global address offset FI ; result addr ENDOP GLOB ; ADDRESS OP LOC (INT CONST address level) : result addr.kind := local ; result addr.value := address level + eumel0 stack offset ; result addr ENDOP LOC ; ADDRESS OP REF (ADDRESS CONST addr) : CONCR (result addr) := CONCR (addr) ; IF result addr.kind = local THEN result addr.kind INCR ref mask ELIF result addr.kind = global THEN errorstop (global ref not allowed) ELSE errorstop (illegal ref operation) FI ; result addr ENDOP REF ; ADDRESS OP DEREF (ADDRESS CONST ref address) : CONCR (result addr) := CONCR (ref address) ; IF is not local ref THEN errorstop (deref on non ref) FI ; result addr.kind DECR ref mask ; result addr . is not local ref : result addr.kind <> local ref ENDOP DEREF ; INT OP REPR (ADDRESS CONST addr) : CONCR (result addr) := CONCR (addr) ; SELECT result addr.kind OF CASE global : CASE local : set bit (result addr.value, 15) CASE global ref : errorstop (global ref not allowed) CASE local ref : prep local ref OTHERWISE errorstop (unknown kind) ENDSELECT ; result addr.value . prep local ref : IF address limit exceeded THEN errorstop (address overflow) FI ; set bit (result addr.value, 14) ; set bit (result addr.value, 15) . address limit exceeded : result addr.value < eumel0 stack offset OR result addr.value > local address limit ENDOP REPR ; BOOL PROC is ref (ADDRESS CONST addr) : addr.kind = local ref ENDPROC is ref ; BOOL PROC is global (ADDRESS CONST addr) : addr.kind = global ENDPROC is global ; BOOL PROC is local (ADDRESS CONST addr) : addr.kind = local ENDPROC is local ; ADDRESS OP + (ADDRESS CONST addr, INT CONST offset) : CONCR (result addr) := CONCR (addr) ; SELECT result addr.kind OF CASE global : inc global CASE local : inc local OTHERWISE errorstop (illegal plus operation) ENDSELECT ; result addr . inc global : result addr.value INCR offset ; IF result addr.value < 0 THEN errorstop (address overflow) FI . inc local : result addr.value INCR offset ; IF result addr.value < eumel 0 stack offset OR result addr.value > local address limit THEN errorstop (address overflow) FI ENDOP + ; PROC adjust (ADDRESS VAR addr, INT CONST adjust length) : IF is local or global THEN adjust to length FI . is local or global : addr.kind <= local . adjust to length : mode := addr.value MOD adjust length ; IF mode <> 0 THEN addr.value INCR (adjust length-mode) FI ENDPROC adjust ; TEXT PROC dump (ADDRESS CONST addr) : kind + text (addr.value) . kind : SELECT addr.kind OF CASE global : "GLOBAL " CASE local : "LOCAL " CASE immediate value : "IMMEDIATE " CASE module nr : "PARAM PROC " CASE global ref : "GLOBAL REF " CASE local ref : "LOCAL REF " OTHERWISE "undef. Addr:" ENDSELECT ENDPROC dump; #page# (**************************************************************************) (* *) (* 4. Datentypen Teil I 03.12.1985 *) (* *) (* Definition des Datentyps DTYPE *) (* *) (* Interne Repraesentation der primitiven Datentypen *) (* Identifikation von DTYPEs *) (* *) (**************************************************************************) TYPE DTYPE = INT ; OP := (DTYPE VAR l, DTYPE CONST r) : CONCR (l) := CONCR (r) ENDOP := ; BOOL OP = (DTYPE CONST l, r) : CONCR (l) = CONCR (r) ENDOP = ; DTYPE PROC void type : DTYPE :(void) ENDPROC void type ; DTYPE PROC int type : DTYPE :(int ) ENDPROC int type ; DTYPE PROC real type : DTYPE :(real) ENDPROC real type ; DTYPE PROC text type : DTYPE :(string) ENDPROC text type ; DTYPE PROC bool type : DTYPE :(bool) ENDPROC bool type ; DTYPE PROC dataspace type : DTYPE :(dataspace) ENDPROC dataspace type ; DTYPE PROC undefined type : DTYPE :(undefined) ENDPROC undefined type ; DTYPE PROC row type : DTYPE :(row) ENDPROC row type ; DTYPE PROC struct type : DTYPE :(struct) ENDPROC struct type ; DTYPE PROC proc type : DTYPE :(permanent param proc) ENDPROC proc type ; DTYPE PROC end type : DTYPE :(end) ENDPROC end type ; INT PROC type class (DTYPE CONST type) : SELECT type id OF CASE int, real, bool, string, dataspace, undefined : 1 CASE void : 0 CASE row : 3 CASE struct : 4 CASE permanent param proc : 5 OTHERWISE pt type ENDSELECT . pt type : IF type id > ptt limit THEN permanent row or struct ELSE abstract type FI . abstract type : 2 . permanent row or struct : mode := cdbint (type link into pt) MOD ptt limit ; IF mode = struct THEN 4 ELIF mode = row THEN 3 ELSE 2 FI . type link into pt : type id + begin of pt minus ptt limit . type id : CONCR (type) ENDPROC type class ; PROC identify (TEXT CONST name,INT VAR size, align, DTYPE VAR type) : SELECT type pos OF CASE 1 : size := 0; align := 0; type id := void CASE 6 : size := 1; align := 1; type id := int CASE 10 : size := 4; align := 4; type id := real CASE 15 : size := 8; align := 4; type id := string CASE 20 : size := 1; align := 1; type id := bool CASE 25 : size := 1; align := 1; type id := dataspace OTHERWISE search for type in permanent table ENDSELECT . type pos : enclose in delimiters ; pos (".VOID.INT.REAL.TEXT.BOOL.DATASPACE.", object name) . enclose in delimiters : object name := "." ; object name CAT name ; object name CAT "." . search for type in permanent table : to object (name) ; IF NOT found THEN size := 0; align := 0; type id := undefined ELSE size := cdbint (permanent pointer + two wordlength) ; type id := permanent pointer - begin of permanent table ; IF size < two wordlength THEN align := 1 ELIF size < four wordlength THEN align := 2 ELSE align := 4 FI FI . type id : CONCR (type) ENDPROC identify ; #page# (**************************************************************************) (* *) (* 5. Operationen Teil I 21.03.1986 *) (* *) (* Definition des Datentyps OPN *) (* Primitive Operationen (:= etc.) *) (* Bereitstellen dee Fehlermeldung 'proc op expected' (coder-intern) *) (* *) (**************************************************************************) TYPE OPN = STRUCT (INT kind, mod nr, top of stack) ; LET proc op = 0 , param proc = 1 , eumel 0 = 2 , nil = 3 , param proc at non ref = "PARAM PROC at non-ref address" , proc op expected = "PROC expected" ; OPN VAR eumel0 opn; eumel0 opn.kind := eumel0 ; eumel0 opn.top of stack := 0 ; eumel0 opn.mod nr := q pp ; OPN CONST pp :: eumel0 opn , nop code :: OPN :(nil, 0, 0) ; THESAURUS VAR eumel 0 opcodes :: empty thesaurus ; PROC init op codes (FILE VAR eumelcodes) : eumel 0 opcodes := empty thesaurus ; WHILE NOT eof (eumelcodes) REP getline (eumelcodes, object name) ; delete trailing blanks ; IF object name <> "" CAND NOT (eumel 0 opcodes CONTAINS object name) THEN insert (eumel 0 opcodes, object name) FI PER . delete trailing blanks : WHILE (object name SUB LENGTH object name) = " " REP object name := subtext (object name, 1, LENGTH object name - 1) PER ENDPROC init op codes ; ADDRESS PROC address (OPN CONST opn) : IF opn.kind <> proc op THEN errorstop (proc op expected) FI ; result addr.kind := module nr ; result addr.value := opn.mod nr ; result addr ENDPROC address ; OPN PROC operation (ADDRESS CONST addr) : IF addr.kind <> local ref THEN errorstop (param proc at non ref) FI ; OPN VAR opn ; opn.kind := param proc ; opn.mod nr :=addr.value ; opn.top of stack := 0 ; opn ENDPROC operation ; TEXT PROC mnemonic (OPN CONST op code) : name (eumel 0 opcodes, op code.mod nr) ENDPROC mnemonic ; OPN PROC nop : nop code ENDPROC nop ; OP := (OPN VAR r, OPN CONST l) : CONCR (r) := CONCR (l) ENDOP := ; BOOL PROC is proc (OPN CONST operation) : operation.kind = proc op ENDPROC is proc ; BOOL PROC is eumel 0 instruction (TEXT CONST op code name) : link (eumel 0 opcodes, op code name) <> 0 ENDPROC is eumel 0 instruction ; #page# (**************************************************************************) (* *) (* 6. Parameterfeld 10.01.1986 *) (* *) (* Bereitstellen des Parameterfeldes *) (* Schreiben und Lesen von Eintraegen im Parameterfeld *) (* Fortschalten von Zeigern in das Parameterfeld *) (* Bereitstellen der Konstanten 'size of param field' (Coder-intern) *) (* *) (**************************************************************************) LET PARAMDESCRIPTOR = STRUCT (DTYPE type, INT access, ADDRESS addr, OPN push opn) , size of param field = 100 , param field exceeded = "Param Field Overflow", param nr out of range = "Illegal Param Number" ; ROW size of param field PARAMDESCRIPTOR VAR param field ; (***** Schreiben *****) PROC test param pos (INT CONST param nr) : IF param nr < 1 OR param nr > size of param field THEN errorstop (param nr out of range) FI ENDPROC test param pos ; PROC declare (INT CONST param nr, DTYPE CONST type) : test param pos (param nr) ; enter type . enter type : CONCR (param field [param nr].type) := CONCR (type) ENDPROC declare ; PROC declare (INT CONST param nr, access) : test param pos (param nr) ; enter access . enter access : param field [param nr].access := access ENDPROC declare ; PROC define (INT CONST param nr, ADDRESS CONST addr) : test param pos (param nr) ; enter address . enter address : CONCR (param field [param nr].addr) := CONCR (addr) ENDPROC define ; PROC define (INT CONST param nr, value) : result addr.kind := immediate value ; result addr.value := value ; define (param nr, result addr) ENDPROC define ; PROC apply (INT CONST param nr, OPN CONST opn) : test param pos (param nr) ; enter push opn . enter push opn : CONCR (param field [param nr].push opn) := CONCR (opn) ENDPROC apply ; PROC parameter (INT CONST param nr, DTYPE CONST type, INT CONST access, ADDRESS CONST addr) : test param pos (param nr) ; enter type ; enter access ; enter address ; enter pp as default . enter type : CONCR (param field [param nr].type) := CONCR (type) . enter access : param field [param nr].access := access . enter address : CONCR (param field [param nr].addr) := CONCR (addr) . enter pp as default : CONCR (param field [param nr].push opn) := CONCR (pp) ENDPROC parameter ; (***** Lesen *****) ADDRESS PROC param address (INT CONST param nr) : test param pos (param nr) ; param field [param nr].addr ENDPROC param address ; DTYPE PROC dtype (INT CONST param nr) : test param pos (param nr) ; param field [param nr].type ENDPROC dtype ; INT PROC access (INT CONST param nr) : test param pos (param nr) ; param field [param nr].access ENDPROC access ; (***** Fortschalten *****) OP NEXTPARAM (INT VAR param nr) : test param pos (param nr) ; IF long entry THEN read until end FI ; param nr INCR 1 . long entry : type class (param field [param nr].type) > 2 . read until end : REP param nr INCR 1 ; NEXTPARAM param nr UNTIL end marker read or end of field PER . end marker read or end of field : param nr > size of param field OR CONCR (param field [param nr].type) = end ENDOP NEXTPARAM ; INT PROC next param (INT CONST p) : index := p ; NEXTPARAM index ; index ENDPROC next param ; TEXT PROC dump (INT CONST p) : IF p > 0 AND p <= 100 THEN dump entry (param field (p)) ELSE param nr out of range FI ENDPROC dump ; TEXT PROC dump entry (PARAMDESCRIPTOR CONST id) : object name := dump (id.type) ; object name CAT text (id.access) ; object name CAT dump (id.addr) ; object name CAT dump (id.push opn) ; object name ENDPROC dump entry ; #page# (**************************************************************************) (* *) (* 7. Datentypen Teil II 20.01.1986 *) (* *) (* Deklaration neuer Datentypen *) (* Vergleich von DTYPEs im Parameterfeld und in der Permanent-Tabelle *) (* *) (**************************************************************************) DTYPE VAR pt type ; PROC declare (TEXT CONST name, INT CONST size, align, DTYPE VAR type) : entry into name table ; put next permanent (permanent type) ; put next permanent (size) ; put next permanent (nt link) ; mark no offsets of text elements . entry into name table : declare object (name, nt link, CONCR (type)) . mark no offsets of text elements : put next permanent (0) ENDPROC declare ; BOOL PROC same type (INT CONST param 1, param 2) : INT CONST left type :: CONCR (param field [param 1].type) ; IF left type = right type THEN same fine structure if there is one ELSE left type = undefined OR right type = undefined FI . right type : CONCR (param field [param 2].type) . same fine structure if there is one : IF left type = row THEN compare row ELIF left type = struct THEN compare struct ELSE TRUE FI . compare row : equal sizes AND same type (param1 + 1, param2 + 1) . equal sizes : param field [param1+1].access = param field [param2+1].access . compare struct : INT VAR p1 :: param1+1, p2 :: param2+1 ; REP IF NOT same type (p1, p2) THEN LEAVE same type WITH FALSE ELIF end type found THEN LEAVE same type WITH TRUE FI ; NEXTPARAM p1 ; NEXTPARAM p2 UNTIL end of field PER ; FALSE . end type found : CONCR (param field [p1].type) = end . end of field : p1 > size of param field OR p2 > size of param field ENDPROC same type ; BOOL PROC same type (INT CONST param nr, DTYPE CONST type) : field pointer := param nr ; CONCR (pt type) := CONCR (type) ; equal types ENDPROC same type ; BOOL PROC equal types : identical types OR one type is undefined . one type is undefined : type of actual field = undefined OR CONCR(pt type) = undefined . identical types : SELECT type class (pt type) OF CASE 0, 1, 2 : type of actual field = CONCR (pt type) CASE 3 : perhaps equal rows CASE 4 : perhaps equal structs OTHERWISE FALSE ENDSELECT . perhaps equal rows : is row AND equal row sizes AND equal row types . is row : type of actual field = row . perhaps equal structs : is struct AND same type fields . is struct : type of actual field = struct . equal row sizes : pt row size = row size within param field . equal row types : same type (field pointer + 1, pt row type) . pt row size : cdb int (CONCR(pt type) + offset to row size) . pt row type : CONCR (pt type) INCR 2 ; pt type . row size within param field : param field [field pointer].access . same type fields : field pointer INCR 1 ; CONCR (pt type) INCR 1 ; REP IF NOT equal types THEN LEAVE same type fields WITH FALSE FI ; IF type of actual field = end THEN LEAVE same type fields WITH TRUE FI ; NEXTPARAM field pointer UNTIL end of field PER ; FALSE . end of field : field pointer > size of param field . type of actual field : CONCR (param field [field pointer].type) . ENDPROC equal types ; BOOL PROC is not void bool or undefined (DTYPE CONST dtype) : type <> void AND type <> bool AND type <> undefined . type : CONCR (dtype) ENDPROC is not void bool or undefined ; #page# (**************************************************************************) (* *) (* 8. Operationen Teil II 07.03.1986 *) (* *) (* Definition der Opcodes *) (* Deklaration, Definition, Identifikation und Applikation *) (* Eroeffnen und Schliessen eines Moduls *) (* *) (**************************************************************************) LET module not opened = "Module not opened" , define missing = "DEFINE missing" , wrong nr of params = "Wrong Nr. of Params:" , illegal kind = "Opcode expected" , nested module = "Nested Modules" , no mod nr = "Param Proc expected" , no immediate value = "Value expected" , type error = "Type Error" , q ln = 1 , q move = 2 , q move code = 2 048 , q inc1 = 3 , q inc1 code = 3 072 , q dec1 = 4 , q dec1 code = 4 096 , q inc = 5 , q inc code = 5 120 , q dec = 6 , q dec code = 6 144 , q add = 7 , q add code = 7 168 , q sub = 8 , q sub code = 8 192 , q clear = 9 , q clear code = 9 216 , q test = 10 , q equ = 11 , q equ code = 11 264 , q lsequ = 12 , q lsequ code = 12 288 , q fmove = 13 , q fmove code = 13 312 , q fadd = 14 , q fadd code = 14 336 , q fsub = 15 , q fsub code = 15 360 , q fmult = 16 , q fmult code = 16 384 , q fdiv = 17 , q fdiv code = 17 408 , q flsequ = 18 , q flsequ code = 18 432 , q tmove = 19 , q tmove code = 19 456 , q tequ = 20 , q tequ code = 20 480 , q accds = 21 , q access ds code = 22 528 , q ref = 22 , q ref code = 23 552 , q subscript = 23 , q subscript code = 24 576 , q select = 24 , q select code = 25 600 , q ppv = 25 , q pp = 26 , q make false = 27 , (* q make false code = 65 513 *) q movex = 28 , (* q longa subs q longa subs code = 65 376 *) q return = 29 , q return code = 32 512 , q true return = 30 , q true return code = 32 513 , q false return = 31 , q false return code = 32 514 , q goret code = 32 519 , q esc mult = 32 , q esc mult code = 32 553 , q esc div = 33 , q esc div code = 32 554 , q esc mod = 34 , q esc mod code = 32 555 , q pproc = 35 , q compl int = 36 , q compl int code = 32 551 , q compl real = 37 , q compl real code = 32 550 , (* q alias ds = 38 , *) q movim = 39 , q esc movim code = 32 547 , q fequ = 40 , q fequ code = 32 548 , q tlsequ = 41 , q tlsequ code = 32 549 , (* q case = 42 , *) q plus = 43 , q minus = 44 , q mult = 45 , q int div = 46 , q real div = 47 , q equal = 48 , q lessequal = 49 ; INT CONST q make false code :: - 1 022 , q longa subs code :: - 159 ; (***** Deklaration *****) PROC declare (OPN VAR operation) : operation.kind := proc op ; get module nr (operation.mod nr) ; operation.top of stack := 0 ENDPROC declare ; PROC declare (TEXT CONST name, INT CONST first, params, OPN VAR operation) : declare (operation) ; entry into name and pt table if necessary ; enter params ; enter result ; enter module number . entry into name and pt table if necessary : declare object (name, nt link, permanent pointer) . enter params : field pointer := first ; FOR index FROM 1 UPTO params REP enter param (param field [field pointer]) ; NEXTPARAM field pointer PER . enter result : enter param (param field[field pointer].type, permanent proc op) . enter module number : put next permanent (operation.mod nr) ENDPROC declare ; PROC enter param (PARAMDESCRIPTOR CONST param) : IF param.access = const THEN enter param (param.type, permanent param const) ELIF param.access = var THEN enter param (param.type, permanent param var) ELSE errorstop ("Unknown Access") FI ENDPROC enter param ; PROC enter param (DTYPE CONST type, INT CONST permanent mode) : SELECT type class (type) OF CASE 0, 1, 2 : put next permanent (CONCR(type) + permanent mode) OTHERWISE errorstop ("Illegal Type") ENDSELECT ENDPROC enter param ; (***** Definition *****) PROC define (OPN VAR opn) : IF NOT module open THEN errorstop (module not opened) ELSE proc head (opn.mod nr, opn.top of stack) FI ENDPROC define ; PROC set length of local storage (OPN VAR opn, INT CONST size) : IF size < 0 OR size > local address limit THEN errorstop (address overflow) ELIF opn.top of stack = 0 THEN errorstop (define missing) ELIF opn.kind <> proc op THEN errorstop (proc op expected) FI ; set length (opn.top of stack, size + eumel0 stack offset) ENDPROC set length of local storage ; PROC define (OPN VAR operation, INT CONST size) : define (operation) ; set length of local storage (operation, size) ENDPROC define ; (***** Identifikation *****) INT VAR counter, result index, result type repr; PROC identify (TEXT CONST name, INT CONST first, params, OPN VAR operation, BOOL VAR object exists) : find result entry ; to object (name) ; IF found THEN first fit and leave if found FI ; IF eumel0 THEN identify eumel0 instruction ELSE yield undefined operation FI . find result entry : result index := first; counter := 0 ; WHILE counter < params REP NEXTPARAM result index ; counter INCR 1 PER ; check on param field exceeded . check on param field exceeded : IF result index > size of param field THEN errorstop (param field exceeded) FI . yield undefined operation : declare (result index, undefined type) ; apply (result index, nop) ; object exists := FALSE . first fit and leave if found : WHILE yet another procedure exists REP check one procedure and leave if match ; next procedure PER . yet another procedure exists : permanent pointer <> 0 . check one procedure and leave if match: param link := permanent pointer + wordlength ; set end marker if end of list ; counter := params ; field pointer := 1 ; REP IF end of params AND counter = 0 THEN procedure found ELIF end of params OR counter = 0 THEN LEAVE check one procedure and leave if match ELSE check next param FI PER . check next param : get type and mode (CONCR(pt type)) ; IF same types THEN set param mode ; counter DECR 1 ; field pointer INCR 1 ; next pt param ELSE LEAVE check one procedure and leave if match FI . same types : (* inline version ! *) equal types . set param mode : param field [field pointer].access := mode . procedure found : get result ; operation.kind := proc op ; operation.mod nr := module number ; operation.top of stack := 0 ; object exists := TRUE ; LEAVE identify . get result : get type and mode (result type) ; declare (result index, mode) . module number : cdbint (param link + 1) . result type : CONCR (param field [result index].type) . eumel0 : eumel0 opn.mod nr := link (eumel 0 opcodes, name) ; eumel0 opn.mod nr <> 0 . identify eumel 0 instruction : init result type with void ; CONCR (operation) := CONCR (eumel0 opn) ; object exists := check params and set result ; declare (result index, DTYPE:(result type repr)) ; declare (result index, const) . init result type with void : result type repr := void . check params and set result : SELECT operation.mod nr OF CASE q return, q false return, q true return : no params CASE q inc1, q dec1 : one int param yielding void CASE q pproc, q pp, q ln : one param yielding void CASE q test : one param yielding bool CASE q clear, q ppv : one int or bool param yielding void CASE q make false : one bool param yielding void CASE q move : two int or bool params yielding void CASE q compl int, q inc, q dec : two int params yielding void CASE q compl real, q fmove : two real params yielding void CASE q equ, q lsequ : two int params yielding bool CASE q fequ, q flsequ : two real params yielding bool CASE q tequ, q tlsequ : two text params yielding bool CASE q tmove : two text params yielding void CASE q accds, q ref : two params yielding void CASE q add, q sub, q esc mult, q esc div, q esc mod : three int params yielding void CASE q fadd, q fsub, q fmult, q fdiv : three real params yielding void CASE q select, q movex : three params CASE q subscript : five params CASE q plus, q minus, q mult : two intreals yielding intreal CASE q int div : two int params yielding int CASE q real div : two real params yielding real CASE q equal, q lessequal : two intrealtexts yielding bool OTHERWISE FALSE ENDSELECT . no params : params = 0 . one int param yielding void : p1 void (int type, first, params) . one param yielding void : params = 1 . one param yielding bool : IF params = 1 THEN result type repr := bool ; TRUE ELSE FALSE FI . one int or bool param yielding void : p1 void (int type, first, params) OR p1 void (bool type, first, params) . one bool param yielding void : p1 void (bool type, first, params) . two int or bool params yielding void : p2 (int type, first, params, void) OR p2 (bool type, first, params, void) . two int params yielding void : p2 (int type, first, params, void) . two real params yielding void : p2 (real type, first, params, void) . two text params yielding void : p2 (text type, first, params, void) . two int params yielding bool : p2 (int type, first, params, bool) . two real params yielding bool : p2 (real type, first, params, bool) . two text params yielding bool : p2 (text type, first, params, bool) . two params yielding void : params = 2 . three int params yielding void : p3 void (int type, first, params) . three real params yielding void : p3 void (real type, first, params) . three params : params = 3 . five params : params = 5 . two intreals yielding intreal : two int params yielding int OR two real params yielding real . two intrealtexts yielding bool : two int params yielding bool OR two real params yielding bool OR two text params yielding bool . two int params yielding int : p2 (int type, first, params, int) . two real params yielding real : p2 (real type, first, params, real) ENDPROC identify ; BOOL PROC p1 void (DTYPE CONST requested type, INT CONST first, param nr) : param nr = 1 AND param type is requested plain type . param type is requested plain type : CONCR (param field [first].type) = CONCR (requested type) ENDPROC p1 void ; BOOL PROC p2 (DTYPE CONST requested type, INT CONST first, param nr, INT CONST result type) : IF param nr = 2 AND param types equal requested plain type THEN result type repr := result type ; TRUE ELSE FALSE FI . param types equal requested plain type : CONCR (param field [first] .type) = CONCR (requested type) AND CONCR (param field [first+1].type) = CONCR (requested type) ENDPROC p2 ; BOOL PROC p3 void (DTYPE CONST requested type, INT CONST first, param nr) : param nr = 3 AND param types ok . param types ok : FOR index FROM first UPTO first+2 REP IF different param types THEN LEAVE p3 void WITH FALSE FI PER ; TRUE . different param types : CONCR (param field [index].type) <> CONCR (requested type) ENDPROC p3 void; (***** Applikation *****) INT VAR address representation, left repr, right repr, result repr; PROC apply (INT CONST first, nr of params, OPN CONST opn) : IF NOT module open THEN errorstop (module not opened) FI ; SELECT opn.kind OF CASE eumel 0 : generate eumel0 instruction CASE proc op : call operation CASE param proc : call param proc CASE nil : OTHERWISE errorstop (illegal kind) ENDSELECT . call operation : push params if necessary (first, nr of params, opn.mod nr) ; call (opn.mod nr) . call param proc : result addr.kind := local ref ; result addr.value := opn.mod nr ; address representation := REPR result addr ; push params if necessary (first, nr of params, address representation) ; call param (address representation) . generate eumel0 instruction : SELECT real nr of params OF CASE 0 : p0 instruction CASE 1 : apply p1 (opn, first addr) CASE 2 : apply p2 (opn, first addr, second addr) CASE 3 : apply p3 (opn, left type, first addr, second addr, third addr) CASE 5 : subscript operation OTHERWISE errorstop (wrong nr of params + text (nr of params)) ENDSELECT . real nr of params : IF operator denotation THEN nr of params + 1 ELSE nr of params FI . operator denotation : opn.mod nr >= q plus . p0 instruction : IF opn.mod nr = q return THEN s0 (q return code) ELIF opn.mod nr = q true return THEN s0 (q true return code) ELIF opn.mod nr = q false return THEN s0 (q false return code) ELSE errorstop (wrong nr of params + mnemonic (opn)) FI . subscript operation : IF opn.mod nr = q subscript THEN subscription ELSE errorstop (wrong nr of params + text (nr of params)) FI . subscription : ADDRESS CONST element length :: param field [first+2].addr , limit :: param field [first+3].addr ; check on immediates ; IF element length.value < 1024 THEN s0 (q subscript code + element length.value) ELSE s0 (q longa subs code) ; s0 (element length.value) FI ; s3 (limit.value - 1, subs index, base addr, subs result) . check on immediates : IF element length.kind <> immediate value OR limit.kind <> immediate value THEN errorstop (no immediate value) FI . subs index : REPR param field [first+1].addr . base addr : REPR param field [first].addr . subs result : REPR param field [first+4].addr . first addr : param field [first].addr . left type : param field [first].type . second addr : param field [nextparam (first)].addr . third addr : param field [nextparam(nextparam(first))].addr ENDPROC apply ; PROC push params if necessary (INT CONST first, nr of params, mod nr) : init param push (mod nr) ; IF nr of params > 0 THEN push params ; push result if there is one FI . push params : field pointer := first ; FOR index FROM 1 UPTO nr of params REP apply p1 (push code, param addr) ; NEXTPARAM field pointer PER . push code : param field [field pointer].push opn . param addr : param field [field pointer].addr . push result if there is one : IF push result necessary THEN push result address (REPR param field [field pointer].addr) FI . push result necessary : param field [field pointer].push opn.kind <> nil AND is not void bool or undefined (param field [field pointer].type) ENDPROC push params if necessary ; PROC apply p1 (OPN CONST opn, ADDRESS CONST addr) : IF opn.mod nr = q ln THEN generate line number ELIF opn.mod nr = q pproc THEN push module nr ELSE gen p1 instruction FI . gen p1 instruction : address representation := REPR addr ; SELECT opn.mod nr OF CASE q inc1 : t1 (q inc1 code, address representation) CASE q dec1 : t1 (q dec1 code, address representation) CASE q clear : t1 (q clear code,address representation) CASE q test : test bool object (address representation) CASE q pp : push param (address representation) CASE q make false : s1 (q make false code, address representation) OTHERWISE errorstop (wrong nr of params + mnemonic (opn)) ENDSELECT . generate line number : IF addr.kind = immediate value THEN mark line (addr.value) ELSE errorstop (no immediate value) FI . push module nr : IF addr.kind = module nr THEN push param proc (addr.value) ELSE errorstop (no mod nr) FI ENDPROC apply p1; PROC apply p2 (OPN CONST opn, ADDRESS CONST left addr, right addr): left repr := REPR left addr ; IF opn.mod nr = q movim THEN move immediate ELSE gen p2 instruction FI . gen p2 instruction : right repr := REPR right addr ; SELECT opn.mod nr OF CASE q move : t2 (q move code, right repr, left repr) CASE q inc : t2 (q inc code, right repr, left repr) CASE q dec : t2 (q dec code, right repr, left repr) CASE q equ : compare (q equ code, left repr, right repr) CASE q lsequ : compare (q lsequ code, left repr, right repr) CASE q fmove : t2 (q fmove code, right repr, left repr) CASE q flsequ : compare (q flsequ code, left repr, right repr) CASE q tmove : t2 (q tmove code, right repr, left repr) CASE q tequ : compare (q tequ code, left repr, right repr) CASE q compl int : s2 (q compl int code, left repr, right repr) CASE q compl real : s2 (q compl real code, left repr, right repr) CASE q fequ : compare (q fequ code, left repr, right repr) CASE q tlsequ : compare (q tlsequ code, left repr, right repr) CASE q accds : t2 (q access ds code, left repr, right repr) CASE q ref : t2 (q ref code, left repr, right repr) OTHERWISE errorstop (wrong nr of params + mnemonic (opn)) ENDSELECT . move immediate : IF right addr.kind = immediate value THEN s0 (q esc movim code) ; s1 (left repr, right addr.value) ELSE errorstop (no immediate value) FI ENDPROC apply p2; PROC apply p3 (OPN CONST opn, DTYPE CONST left dtype, ADDRESS CONST left addr, right addr, result addr ): left repr := REPR left addr ; result repr := REPR result addr ; IF opn.mod nr = q select THEN gen select instruction ELIF opn.mod nr = q movex THEN gen long move ELSE gen p3 instruction FI . gen p3 instruction : right repr := REPR right addr ; SELECT opn.mod nr OF CASE q add : int add CASE q sub : int sub CASE q fadd : real add CASE q fsub : real sub CASE q fmult : real mult CASE q fdiv, q real div : real div CASE q esc mult : int mult CASE q esc div, q int div : int div CASE q esc mod : int mod CASE q plus : int real add CASE q minus : int real sub CASE q mult : int real mult CASE q equal, q lessequal : compare (comp code, left repr, right repr) OTHERWISE errorstop (wrong nr of params + mnemonic (opn)) ENDSELECT . gen select instruction : IF right addr.kind = immediate value THEN t1 (q select code, left repr) ; s1 (right addr.value, result repr) ELSE errorstop (no immediate value) FI . gen long move : IF right addr.kind = immediate value THEN long move (left repr, result repr, right addr.value) ELSE errorstop (no immediate value) FI . int add : compute (q add code, left repr, right repr, result repr) . int sub : compute (q sub code, left repr, right repr, result repr) . real add : compute (q fadd code, left repr, right repr, result repr) . real sub : compute (q fsub code, left repr, right repr, result repr) . real mult : compute (q fmult code, left repr, right repr, result repr) . real div : compute (q fdiv code, left repr, right repr, result repr) . int mult : s3 (q esc mult code, left repr, right repr, result repr) . int div : s3 (q esc div code, left repr, right repr, result repr) . int mod : s3 (q esc mod code, left repr, right repr, result repr) . int real add : IF left type = int THEN int add ELSE real add FI . int real sub : IF left type = int THEN int sub ELSE real sub FI . int real mult : IF left type = int THEN int mult ELSE real mult FI . comp code : SELECT left type OF CASE int : IF opn.mod nr = q equal THEN q equ ELSE q lsequ FI CASE real : IF opn.mod nr = q equal THEN q fequ ELSE q flsequ FI CASE string : IF opn.mod nr = q equal THEN q tequ ELSE q tlsequ FI OTHERWISE errorstop (type error); q equ ENDSELECT . left type : CONCR (left dtype) ENDPROC apply p3; (***** Modul *****) BOOL VAR module open ; .init opn section : module open := FALSE .; PROC begin module : IF module open THEN errorstop (nested module) ELSE begin modul ; module open := TRUE FI ENDPROC begin module ; PROC end module : IF NOT module open THEN errorstop (module not opened) ELSE end modul ; module open := FALSE FI ENDPROC end module ; TEXT PROC dump (OPN CONST operation) : IF operation.kind = proc op THEN " PROC" + text (operation.mod nr, 5) ELIF operation.kind = eumel 0 THEN " EUMEL0: " + mnemonic (operation) ELSE " undef. Opn" FI ENDPROC dump ; PROC begin modul : EXTERNAL 10072 ENDPROC begin modul ; PROC end modul : EXTERNAL 10011 ENDPROC end modul ; PROC proc head (INT VAR mod nr, top of stack) : EXTERNAL 10012 ENDPROC proc head ; PROC set length (INT CONST top of stack, size) : EXTERNAL 10013 ENDPROC set length ; PROC get module nr (INT VAR module nr) : EXTERNAL 10016 ENDPROC get module nr ; PROC compute (INT CONST op code, l addr, r addr, result address) : EXTERNAL 10017 ENDPROC compute ; PROC compare (INT CONST op code, l addr, r addr) : EXTERNAL 10018 ENDPROC compare ; PROC long move (INT CONST to, from, length) : EXTERNAL 10019 ENDPROC long move ; PROC put next permanent (INT CONST permanent value) : EXTERNAL 10020 ENDPROC put next permanent ; PROC call (INT CONST mod nr) : EXTERNAL 10022 ENDPROC call ; PROC call param (INT CONST mod nr) : EXTERNAL 10023 ENDPROC call param ; PROC push param (INT CONST addr) : EXTERNAL 10024 ENDPROC push param ; PROC push param proc (INT CONST mod nr) : EXTERNAL 10025 ENDPROC push param proc ; PROC init param push (INT CONST mod nr) : EXTERNAL 10026 ENDPROC init param push ; PROC push result address (INT CONST addr) : EXTERNAL 10027 ENDPROC push result address ; PROC test bool object (INT CONST addr) : EXTERNAL 10187 ENDPROC test bool object ; PROC mark line (INT CONST line number) : EXTERNAL 10030 ENDPROC mark line ; PROC s0 (INT CONST op code) : EXTERNAL 10038 ENDPROC s0 ; PROC s1 (INT CONST op code, addr) : EXTERNAL 10039 ENDPROC s1 ; PROC s2 (INT CONST op code , addr1, addr2) : EXTERNAL 10040 ENDPROC s2 ; PROC s3 (INT CONST op code, addr1, addr2, addr3) : EXTERNAL 10041 ENDPROC s3 ; PROC t1 (INT CONST op code, addr) : EXTERNAL 10042 ENDPROC t1 ; PROC t2 (INT CONST op code, addr1, addr2) : EXTERNAL 10043 ENDPROC t2 ; #page# (**************************************************************************) (* *) (* 9. Speicherverwaltung 21.03.1986 *) (* *) (* Ablage der Paketdaten *) (* *) (**************************************************************************) INT VAR address value; INT CONST data allocation by coder := 1 , data allocation by user := 2 ; LET not initialized = 0 , wrong mm mode = "Wrong MM Mode" , define on non global = "Define for GLOB only" , text too long = "TEXT too long" ; TEXT VAR const buffer :: point line ; .reset memory management mode : memory management mode := not initialized . ; PROC reserve storage (INT CONST size) : IF memory management mode <> data allocation by user THEN errorstop (wrong mm mode) FI ; allocate var (address value, size) ; memory management mode := not initialized ENDPROC reserve storage ; PROC allocate variable (ADDRESS VAR addr, INT CONST size) : IF memory management mode <> data allocation by coder THEN errorstop (wrong mm mode) FI ; allocate var (addr.value, size) ; addr.kind := global ENDPROC allocate variable ; PROC allocate denoter (ADDRESS VAR addr, INT CONST value) : IF memory management mode <> data allocation by coder THEN errorstop (wrong mm mode) FI ; allocate int denoter (addr.value) ; put data word (value, addr.value) ; addr.kind := global ENDPROC allocate denoter ; PROC allocate denoter (ADDRESS VAR addr, REAL CONST value) : IF memory management mode <> data allocation by coder THEN errorstop (wrong mm mode) FI ; allocate real denoter (addr.value) ; addr.kind := global ; define (addr, value) ENDPROC allocate denoter ; PROC allocate denoter (ADDRESS VAR addr, TEXT CONST value) : IF memory management mode <> data allocation by coder THEN errorstop (wrong mm mode) FI ; allocate text denoter (addr.value, (LENGTH value+1) DIV 2 + 2) ; addr.kind := global ; skip heaplink; define (addr, value) ; reset heaplink . skip heaplink : addr.value INCR 1 . reset heaplink : addr.value DECR 1 ENDPROC allocate denoter ; PROC define (ADDRESS CONST addr, INT CONST value) : IF addr.kind <> global THEN errorstop (define on non global) FI ; put data word (value, addr.value) ENDPROC define ; PROC define (ADDRESS CONST addr, REAL CONST value) : IF addr.kind <> global THEN errorstop (define on non global) FI ; replace (const buffer, 1, value) ; address value := addr.value ; FOR index FROM 1 UPTO 4 REP put data word (const buffer ISUB index, address value) ; address value INCR 1 PER ENDPROC define ; PROC define (ADDRESS CONST addr, TEXT CONST value) : IF addr.kind <> global THEN errorstop (define on non global) ELIF LENGTH value > 255 THEN errorstop (text too long) FI ; address value := addr.value ; const buffer := code (LENGTH value) ; const buffer CAT value ; const buffer CAT " " ; FOR index FROM 1 UPTO LENGTH const buffer DIV 2 REP put data word (const buffer ISUB index, address value) ; address value INCR 1 PER ; const buffer := point line ENDPROC define ; PROC prep pbase (INT VAR offset) : EXTERNAL 10032 ENDPROC prep pbase; PROC allocate var (INT VAR addr, INT CONST length) : EXTERNAL 10033 ENDPROC allocate var ; PROC allocate int denoter (INT VAR addr) : EXTERNAL 10034 ENDPROC allocate int denoter ; PROC allocate real denoter (INT VAR addr) : EXTERNAL 10035 ENDPROC allocate real denoter ; PROC allocate text denoter (INT VAR addr, INT CONST length) : EXTERNAL 10036 ENDPROC allocate text denoter ; PROC put data word (INT CONST value, INT CONST addr) : EXTERNAL 10037 ENDPROC put data word ; #page# (**************************************************************************) (* *) (* 10. Inspector 08.01.1986 *) (* *) (**************************************************************************) INT VAR line number, pattern length, packet link, begin of packet, last packet entry, indentation; TEXT VAR bulletin name, type and mode, pattern, buffer; DATASPACE VAR bulletin ds :: nilspace ; .packet name : cdb text (cdb int(packet link + wordlength) + two word length) . .within editor : aktueller editor > 0 . ; TEXT PROC type name (DTYPE CONST type) : type and mode := "" ; name of type (CONCR (type)) ; type and mode ENDPROC type name ; TEXT PROC dump (DTYPE CONST type) : type and mode := "TYPE " ; name of type (CONCR (type)) ; type and mode ENDPROC dump ; PROC name of type (INT CONST type) : SELECT type OF CASE void : CASE int : type and mode CAT "INT" CASE real : type and mode CAT "REAL" CASE string : type and mode CAT "TEXT" CASE bool, bool result : type and mode CAT "BOOL" CASE dataspace : type and mode CAT "DATASPACE" OTHERWISE : complex type ENDSELECT . complex type : IF type > ptt limit THEN perhaps permanent struct or row ELSE get complex type FI . perhaps permanent struct or row : index := type + begin of pt minus ptt limit ; mode := cdb int (index) MOD ptt limit ; IF mode = permanent row THEN get permanent row ELIF mode = permanent struct THEN get permanent struct ELSE type and mode CAT "-" FI . get complex type : index := type + begin of permanent table ; IF is complex type THEN get name ELSE type and mode CAT "-" FI . is complex type : permanent type definition mode = permanent type . get name : type and mode CAT cdb text (link to type name + two word length) . link to type name : cdb int (index + three word length) . permanent type definition mode : cdb int (index + wordlength) . get permanent row : INT VAR t; type and mode CAT "ROW " ; type and mode CAT text (cdb int (index + wordlength)) ; type and mode CAT " " ; param link := index + two wordlength ; get type and mode (t) ; name of type (t) . get permanent struct : type and mode CAT "STRUCT ( ... )" ENDPROC name of type ; PROC help (TEXT CONST proc name) : prep bulletin ; prep help ; scan (object name) ; next symbol (pattern) ; packet link := end of permanent table ; IF function = 0 THEN standard help ELSE asterisk help FI . prep help : object name := compress (proc name) ; INT VAR function :: 0 ; INT CONST l :: LENGTH object name ; IF l > 1 AND object name <> "**" THEN IF (object name SUB l) = "*" THEN function INCR 2 ; delete char (object name, l) FI ; IF (object name SUB 1) = "*" THEN function INCR 1 ; delete char (object name, 1) FI ; IF another asterisk THEN wrong function FI FI. another asterisk : pos (object name, "*") <> 0 . wrong function : errorstop ("unzulaessige Sternfunktion") . standard help : to object (pattern) ; IF found THEN display ELSE error stop ("unbekannt: " + proc name) FI . display : WHILE permanent pointer <> 0 REP put name of packet if necessary ; put specifications (pattern) ; next procedure ENDREP ; show bulletin file . put name of packet if necessary : IF new packet THEN packet link := permanent pointer ; find begin of packet ; writeline (2) ; write packet name FI . find begin of packet : REP packet link DECR wordlength UNTIL begin of packet found PER . begin of packet found : cdb int (packet link) = permanent packet . new packet : permanent pointer < packet link . asterisk help : hash table pointer := begin of hash table ; pattern length := LENGTH pattern - 1 ; REP list all objects in current hash table chain ; next hash entry UNTIL end of hash table reached ENDREP ; show bulletin file . list all objects in current hash table chain : nt link := hash table pointer ; WHILE yet another nt entry REP permanent pointer := cdb int (nt link + wordlength) ; object name := cdb text (nt link + two word length) ; IF matching THEN into bulletin FI PER . matching : INT CONST p :: pos (object name, pattern) ; SELECT function OF CASE 1 : p <> 0 AND p = LENGTH object name - pattern length CASE 2 : p = 1 CASE 3 : p <> 0 OTHERWISE FALSE ENDSELECT . into bulletin : object names into bulletin (BOOL PROC not end of chain) ENDPROC help ; BOOL PROC not end of chain : permanent pointer <> 0 ENDPROC not end of chain ; PROC write packet name : indentation := 0 ; write line ; write bulletin line ("PACKET ") ; indentation := 7 ; object name := packet name ; write bulletin line (object name) ; write bulletin line (":") ; writeline (2) ENDPROC write packet name ; PROC put specifications (TEXT CONST proc name) : put obj name (proc name) ; to first param ; IF NOT end of params THEN put param list FI ; put result ; writeline . to first param : param link := permanent pointer + word length ; set end marker if end of list . put result : INT VAR type; get type and mode (type) ; IF type <> void THEN type and mode := " --> " ; name of type (type) ; write bulletin line (type and mode) FI ENDPROC put specifications ; PROC put param list : write bulletin line (" (") ; REP INT VAR type; get type and mode (type) ; put type and mode ; maybe param proc ; next pt param ; IF end of params THEN write bulletin line (")") ; LEAVE put param list FI ; write bulletin line (", ") ; PER . put type and mode : type and mode := "" ; name of type (type) ; type and mode CAT name of mode ; write bulletin line (type and mode) . name of mode : IF mode = const THEN " CONST" ELIF mode = var THEN " VAR" ELSE " PROC" FI . maybe param proc : IF mode = permanent param proc THEN put virtual params FI . put virtual params : skip over result type if complex type ; IF NOT end of virtual params THEN put param list FI. skip over result type if complex type : next pt param . end of virtual params : end of params ENDPROC put param list ; PROC next packet : REP packet link INCR wordlength ; word := cdb int (packet link) ; IF word = permanent packet THEN true return ELIF end of permanents THEN false return FI ; ENDREP . true return : found := TRUE ; LEAVE next packet . false return : found := FALSE ; LEAVE next packet . end of permanents : word = permanent end OR packet link > end of permanent table ENDPROC next packet ; PROC prep bulletin : forget (bulletin ds) ; bulletin ds := nilspace ; bulletin file := sequential file (output, bulletin ds) ; line number := 0 ; buffer := "" ENDPROC prep bulletin ; PROC show bulletin file : IF within editor THEN ueberschrift neu FI ; DATASPACE VAR local ds :: bulletin ds ; FILE VAR local file :: sequential file (modify, local ds) ; edit (local file) ; forget (local ds) ENDPROC show bulletin file ; PROC write bulletin line (TEXT CONST line) : IF LENGTH buffer + LENGTH line > 75 THEN writeline FI ; buffer CAT line ENDPROC write bulletin line ; PROC writeline : write (bulletin file, buffer) ; line (bulletin file) ; line number INCR 1 ; cout (line number) ; buffer := indentation * " " ENDPROC writeline ; PROC writeline (INT CONST times) : IF LENGTH compress(buffer) <> 0 THEN index := times - 1 ; writeline ELSE index := times FI ; line (bulletin file, index) ; line number INCR index; indentation := 0 ; cout (line number) ENDPROC writeline ; PROC bulletin (TEXT CONST packet name) : prep bulletin ; scan (packet name) ; next symbol (pattern) ; to packet ; IF found THEN list packet ; show bulletin file ELSE error stop (packet name + " ist kein Paketname") FI . to packet : last packet entry := 0 ; get nametab link of packet name ; packet link := before first pt entry ; REP packet link INCR wordlength ; word := cdb int (packet link) ; IF word < 0 THEN IF word = permanent packet THEN packet found ELIF word = permanent end THEN return FI FI ENDREP . get nametab link of packet name : to object (pattern) ; IF NOT found THEN error stop ("unbekanntes Paket :" + packet name) ; LEAVE to packet FI . packet found : IF cdb int (packet link + wordlength) = nt link THEN last packet entry := packet link FI . return : IF last packet entry <> 0 THEN found := TRUE ; packet link := last packet entry ELSE found := FALSE FI ; LEAVE to packet ENDPROC bulletin ; PROC list packet : begin of packet := packet link + word length ; write packet name ; find end of packet ; run through nametab and list all packet objects . find end of packet : last packet entry := begin of packet ; REP last packet entry INCR wordlength ; word := cdb int (last packet entry) ; UNTIL end of packet entries PER . end of packet entries : word = permanent packet OR word = permanent end . run through nametab and list all packet objects : hashtable pointer := begin of hashtable ; REP nt link := hashtable pointer ; list objects of current packet in this chain ; next hash entry UNTIL end of hashtable reached ENDREP . list objects of current packet in this chain : WHILE yet another nt entry REP permanent pointer := cdb int (nt link + wordlength) ; put objects of this name PER . put objects of this name : IF there is at least one object of this name in the current packet THEN into bulletin FI . there is at least one object of this name in the current packet : REP IF permanent pointer >= begin of packet AND permanent pointer < last packet entry THEN LEAVE there is at least one object of this name in the current packet WITH TRUE FI ; next procedure UNTIL permanent pointer = 0 PER ; FALSE . into bulletin : object name := cdb text (nt link + two word length) ; object names into bulletin (BOOL PROC within packet) ENDPROC list packet ; BOOL PROC within packet : permanent pointer >= begin of packet AND permanent pointer < last packet entry ENDPROC within packet ; PROC object names into bulletin (BOOL PROC link ok) : scan (object name) ; next symbol (object name, mode) ; IF type definition THEN put type definition ELSE put object definitions FI . type definition : mode = bold AND no params . no params : cdb int (permanent pointer + word length) >= permanent type . put type definition : put obj name (object name) ; write bulletin line ("TYPE ") ; writeline (1) . put object definitions : WHILE link ok REP put specifications (object name) ; next procedure ENDREP ENDPROC object names into bulletin ; PROC bulletin : prep bulletin ; packet link := first permanent entry ; REP list packet ; write line (4) ; next packet UNTIL NOT found PER ; show bulletin file ENDPROC bulletin ; PROC put obj name (TEXT CONST name) : buffer := " " ; bulletin name := point line ; change (bulletin name, 1, end of line or name, name) ; buffer CAT bulletin name ; indentation := LENGTH buffer + 1 . end of line or name : min (LENGTH name, LENGTH bulletin name) ENDPROC put obj name ; PROC packets : prep bulletin ; packet link := first permanent entry ; REP object name := packet name ; put obj name (object name) ; write line ; next packet UNTIL NOT found PER ; show bulletin file ENDPROC packets ; #page# (**************************************************************************) (* *) (* 11. ELAN Run-Interface 09.01.1986 *) (* *) (* Uebersetzen von ELAN-Programmen *) (* Bereitstellen der Ausgabeprozeduren fuer den ELAN-Compiler *) (* *) (**************************************************************************) BOOL VAR list option := FALSE , check option := TRUE , listing enabled := FALSE ; FILE VAR listing file ; TEXT VAR listing file name := "" ; PROC run (TEXT CONST file name) : enable stop ; IF NOT exists (file name) THEN errorstop ("""" + file name + """ gibt es nicht") FI ; last param (file name) ; run elan (file name, no ins) END PROC run; PROC run : run (last param) ENDPROC run ; PROC run again : IF run again mod nr <> 0 THEN elan (run again mode, bulletin file, "", run again mod nr, no ins, no lst, check option, no sermon) ELSE errorstop ("'run again' nicht moeglich") FI ENDPROC run again ; PROC insert (TEXT CONST file name) : enable stop ; IF NOT exists (file name) THEN errorstop ("""" + file name + """ gibt es nicht") FI ; last param (file name) ; run elan (file name, ins) ENDPROC insert ; PROC insert : insert (last param) ENDPROC insert ; PROC run elan (TEXT CONST file name, BOOL CONST insert option) : FILE VAR source := sequential file (modify, file name) ; IF listing enabled THEN open listing file FI ; disable stop ; no do again ; elan (compile file mode, source, "" , run again mod nr, insert option, list option, check option, sermon) ; IF anything noted AND command dialogue THEN ignore halt during compiling ; note edit (source) ; errorstop ("") FI . ignore halt during compiling : IF is error THEN put error ; clear error ; pause (5) FI . open listing file : listing file := sequential file (output, listing file name) ; max line length (listing file, 130) ENDPROC run elan ; (* PROC out text (TEXT CONST text, INT CONST out type) : INTERNAL 257 ; IF online THEN out (text) FI ; IF out type = error message THEN note (text) ; number of errors INCR 1 ELIF out type = warning message THEN note (text) FI ; IF listing enabled THEN write (listing file, text) FI ENDPROC out text ; PROC out line (INT CONST out type) : INTERNAL 258 ; IF online THEN out (""13""10"") FI ; IF out type = error message OR out type = warning message THEN note line ELIF listing enabled THEN line (listing file) FI ENDPROC out line ; *) PROC prot (TEXT CONST file name) : list option := TRUE ; listing file name := file name ; listing enabled := TRUE ENDPROC prot ; PROC prot off : list option := FALSE ; listing enabled := FALSE ENDPROC prot off ; BOOL PROC prot : list option ENDPROC prot ; PROC check on : check option := TRUE ENDPROC check on ; PROC check off : check option := FALSE ENDPROC check off ; BOOL PROC check : check option ENDPROC check ; ENDPACKET eumel coder ;