Age | Commit message (Expand) | Author | Files | Lines |
---|---|---|---|---|
2015-06-09 | Fix interrupt-based shake/horizon detection | Lars-Dominik Braun | 1 | -33/+35 |
2015-03-04 | Makefile: Add avrdude-based device reset | Lars-Dominik Braun | 1 | -0/+4 |
2015-02-27 | Add license | Lars-Dominik Braun | 19 | -0/+417 |
2015-02-26 | accel: Stop polling | Lars-Dominik Braun | 4 | -154/+133 |
2015-02-26 | gyro: Async stop request | Lars-Dominik Braun | 1 | -17/+14 |
2015-02-10 | accel: Nonblocking | Lars-Dominik Braun | 3 | -50/+67 |
2015-02-10 | ui: Fix LED test mode | Lars-Dominik Braun | 1 | -1/+2 |
2015-02-10 | pwm: Use fast mode only for speaker beep | Lars-Dominik Braun | 1 | -2/+16 |
2015-02-10 | Reduce CPU frequency | Lars-Dominik Braun | 6 | -45/+53 |
2015-01-29 | Replace enums with uint8_t | Lars-Dominik Braun | 6 | -46/+55 |
2015-01-29 | accel: Ignore shake if horizon changed | Lars-Dominik Braun | 1 | -2/+9 |
2015-01-29 | accel: Fix shake detection, again | Lars-Dominik Braun | 1 | -8/+13 |
2015-01-20 | i2c: twRequests returns false if bus is busy | Lars-Dominik Braun | 2 | -21/+25 |
2015-01-20 | ui: Increase wait time between confirm flashes | Lars-Dominik Braun | 1 | -2/+3 |
2015-01-20 | Generic LED flash mode | Lars-Dominik Braun | 1 | -23/+84 |
2015-01-20 | gyro: Fix non-blocking start | Lars-Dominik Braun | 1 | -23/+31 |
2015-01-20 | timer: Fix one-shot mode | Lars-Dominik Braun | 1 | -3/+4 |
2015-01-13 | Remove debugging puts/fwrite | Lars-Dominik Braun | 3 | -28/+3 |
2015-01-13 | Add generic flash ui state, fix timer race condition | Lars-Dominik Braun | 3 | -75/+119 |
2014-12-15 | ui: Reduce required shake count to 1 | Lars-Dominik Braun | 1 | -3/+3 |
2014-12-15 | pwm: Add method to switch all LEDs off | Lars-Dominik Braun | 3 | -32/+24 |
2014-12-15 | ui: Switch off LEDs when going into select_coarse | Lars-Dominik Braun | 1 | -1/+5 |
2014-12-15 | ui: Use flashing alarm | Lars-Dominik Braun | 1 | -11/+58 |
2014-12-09 | gyro: non-blocking start/stop, enable only when required | Lars-Dominik Braun | 3 | -35/+67 |
2014-12-09 | accel: Fix shake gesture detection | Lars-Dominik Braun | 3 | -51/+53 |
2014-11-25 | gyro/accel: Disable pull-ups | Lars-Dominik Braun | 2 | -10/+8 |
2014-11-25 | gyro: Reduce sensitivity | Lars-Dominik Braun | 1 | -3/+3 |
2014-11-11 | ui: Update leds when switching to fine selection | Lars-Dominik Braun | 1 | -26/+33 |
2014-11-11 | ui: Fix debug messages | Lars-Dominik Braun | 1 | -7/+4 |
2014-11-11 | ui: Simplify accel | Lars-Dominik Braun | 1 | -2/+1 |
2014-11-11 | pwm: Respect PB0/1’s value set by gyro | Lars-Dominik Braun | 2 | -1/+9 |
2014-11-11 | Fix i2c out of bounds write | Lars-Dominik Braun | 1 | -3/+3 |
2014-09-30 | Unify entering idle state | Lars-Dominik Braun | 1 | -17/+19 |
2014-09-30 | Fix theoretical LED step edge case | Lars-Dominik Braun | 1 | -1/+1 |
2014-09-30 | Limit fine value range | Lars-Dominik Braun | 1 | -1/+7 |
2014-09-30 | Fix timer return value | Lars-Dominik Braun | 1 | -1/+1 |
2014-09-30 | Reliable reboot, idle status LED indicator | Lars-Dominik Braun | 4 | -14/+29 |
2014-09-30 | LED error code for assert() | Lars-Dominik Braun | 2 | -4/+18 |
2014-09-30 | Add wakeup source mechanism | Lars-Dominik Braun | 9 | -24/+67 |
2014-09-16 | timer: Support timeouts > 8s | Lars-Dominik Braun | 2 | -13/+64 |
2014-09-16 | Auto stop alarm | Lars-Dominik Braun | 1 | -4/+10 |
2014-09-16 | Finally fix speaker | Lars-Dominik Braun | 7 | -134/+62 |
2014-08-26 | speaker: Fix beep | Lars-Dominik Braun | 1 | -9/+20 |
2014-08-19 | Add AVRdude terminal | Lars-Dominik Braun | 1 | -0/+3 |
2014-08-19 | Switch to new timer, fix usability | Lars-Dominik Braun | 1 | -62/+102 |
2014-08-19 | timer: Support arbitrary timer values | Lars-Dominik Braun | 2 | -16/+32 |
2014-08-05 | pwm: Add brightness control | Lars-Dominik Braun | 2 | -54/+55 |
2014-07-29 | i2c: Make sure status is _OK | Lars-Dominik Braun | 3 | -4/+4 |
2014-07-22 | Use “volatile” on struct members | Lars-Dominik Braun | 2 | -7/+7 |
2014-07-22 | Convert printf into puts | Lars-Dominik Braun | 8 | -30/+37 |