From 02f5c2ed34d16c9809b488b5a5082c40bb0f3188 Mon Sep 17 00:00:00 2001 From: Michał Cichoń Date: Thu, 27 Aug 2015 21:12:00 +0200 Subject: Remove libcurl as it was replaced by WinHTTP. --- libcurl/src/lib/easy.c | 1130 ------------------------------------------------ 1 file changed, 1130 deletions(-) delete mode 100644 libcurl/src/lib/easy.c (limited to 'libcurl/src/lib/easy.c') diff --git a/libcurl/src/lib/easy.c b/libcurl/src/lib/easy.c deleted file mode 100644 index 9492d3e..0000000 --- a/libcurl/src/lib/easy.c +++ /dev/null @@ -1,1130 +0,0 @@ -/*************************************************************************** - * _ _ ____ _ - * Project ___| | | | _ \| | - * / __| | | | |_) | | - * | (__| |_| | _ <| |___ - * \___|\___/|_| \_\_____| - * - * Copyright (C) 1998 - 2015, Daniel Stenberg, , et al. - * - * This software is licensed as described in the file COPYING, which - * you should have received as part of this distribution. The terms - * are also available at http://curl.haxx.se/docs/copyright.html. - * - * You may opt to use, copy, modify, merge, publish, distribute and/or sell - * copies of the Software, and permit persons to whom the Software is - * furnished to do so, under the terms of the COPYING file. - * - * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY - * KIND, either express or implied. - * - ***************************************************************************/ - -#include "curl_setup.h" - -/* - * See comment in curl_memory.h for the explanation of this sanity check. - */ - -#ifdef CURLX_NO_MEMORY_CALLBACKS -#error "libcurl shall not ever be built with CURLX_NO_MEMORY_CALLBACKS defined" -#endif - -#ifdef HAVE_NETINET_IN_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_ARPA_INET_H -#include -#endif -#ifdef HAVE_NET_IF_H -#include -#endif -#ifdef HAVE_SYS_IOCTL_H -#include -#endif - -#ifdef HAVE_SYS_PARAM_H -#include -#endif - -#include "strequal.h" -#include "urldata.h" -#include -#include "transfer.h" -#include "vtls/vtls.h" -#include "url.h" -#include "getinfo.h" -#include "hostip.h" -#include "share.h" -#include "strdup.h" -#include "progress.h" -#include "easyif.h" -#include "select.h" -#include "sendf.h" /* for failf function prototype */ -#include "curl_ntlm.h" -#include "connect.h" /* for Curl_getconnectinfo */ -#include "slist.h" -#include "amigaos.h" -#include "non-ascii.h" -#include "warnless.h" -#include "conncache.h" -#include "multiif.h" -#include "sigpipe.h" -#include "ssh.h" -#include "curl_printf.h" - -/* The last #include files should be: */ -#include "curl_memory.h" -#include "memdebug.h" - -/* win32_cleanup() is for win32 socket cleanup functionality, the opposite - of win32_init() */ -static void win32_cleanup(void) -{ -#ifdef USE_WINSOCK - WSACleanup(); -#endif -#ifdef USE_WINDOWS_SSPI - Curl_sspi_global_cleanup(); -#endif -} - -/* win32_init() performs win32 socket initialization to properly setup the - stack to allow networking */ -static CURLcode win32_init(void) -{ -#ifdef USE_WINSOCK - WORD wVersionRequested; - WSADATA wsaData; - int res; - -#if defined(ENABLE_IPV6) && (USE_WINSOCK < 2) - Error IPV6_requires_winsock2 -#endif - - wVersionRequested = MAKEWORD(USE_WINSOCK, USE_WINSOCK); - - res = WSAStartup(wVersionRequested, &wsaData); - - if(res != 0) - /* Tell the user that we couldn't find a useable */ - /* winsock.dll. */ - return CURLE_FAILED_INIT; - - /* Confirm that the Windows Sockets DLL supports what we need.*/ - /* Note that if the DLL supports versions greater */ - /* than wVersionRequested, it will still return */ - /* wVersionRequested in wVersion. wHighVersion contains the */ - /* highest supported version. */ - - if(LOBYTE( wsaData.wVersion ) != LOBYTE(wVersionRequested) || - HIBYTE( wsaData.wVersion ) != HIBYTE(wVersionRequested) ) { - /* Tell the user that we couldn't find a useable */ - - /* winsock.dll. */ - WSACleanup(); - return CURLE_FAILED_INIT; - } - /* The Windows Sockets DLL is acceptable. Proceed. */ -#elif defined(USE_LWIPSOCK) - lwip_init(); -#endif - -#ifdef USE_WINDOWS_SSPI - { - CURLcode result = Curl_sspi_global_init(); - if(result) - return result; - } -#endif - - return CURLE_OK; -} - -#ifdef USE_LIBIDN -/* - * Initialise use of IDNA library. - * It falls back to ASCII if $CHARSET isn't defined. This doesn't work for - * idna_to_ascii_lz(). - */ -static void idna_init (void) -{ -#ifdef WIN32 - char buf[60]; - UINT cp = GetACP(); - - if(!getenv("CHARSET") && cp > 0) { - snprintf(buf, sizeof(buf), "CHARSET=cp%u", cp); - putenv(buf); - } -#else - /* to do? */ -#endif -} -#endif /* USE_LIBIDN */ - -/* true globals -- for curl_global_init() and curl_global_cleanup() */ -static unsigned int initialized; -static long init_flags; - -///* -// * strdup (and other memory functions) is redefined in complicated -// * ways, but at this point it must be defined as the system-supplied strdup -// * so the callback pointer is initialized correctly. -// */ -//#if defined(_WIN32_WCE) -//#define system_strdup _strdup -//#elif !defined(HAVE_STRDUP) -//#define system_strdup curlx_strdup -//#else -//#define system_strdup strdup -//#endif -// -//#if defined(_MSC_VER) && defined(_DLL) && !defined(__POCC__) -//# pragma warning(disable:4232) /* MSVC extension, dllimport identity */ -//#endif -// -//#ifndef __SYMBIAN32__ -///* -// * If a memory-using function (like curl_getenv) is used before -// * curl_global_init() is called, we need to have these pointers set already. -// */ -//curl_malloc_callback Curl_cmalloc = (curl_malloc_callback)malloc; -//curl_free_callback Curl_cfree = (curl_free_callback)free; -//curl_realloc_callback Curl_crealloc = (curl_realloc_callback)realloc; -//curl_strdup_callback Curl_cstrdup = (curl_strdup_callback)system_strdup; -//curl_calloc_callback Curl_ccalloc = (curl_calloc_callback)calloc; -//#if defined(WIN32) && defined(UNICODE) -//curl_wcsdup_callback Curl_cwcsdup = (curl_wcsdup_callback)_wcsdup; -//#endif -//#else -///* -// * Symbian OS doesn't support initialization to code in writeable static data. -// * Initialization will occur in the curl_global_init() call. -// */ -//curl_malloc_callback Curl_cmalloc; -//curl_free_callback Curl_cfree; -//curl_realloc_callback Curl_crealloc; -//curl_strdup_callback Curl_cstrdup; -//curl_calloc_callback Curl_ccalloc; -//#endif -// -//#if defined(_MSC_VER) && defined(_DLL) && !defined(__POCC__) -//# pragma warning(default:4232) /* MSVC extension, dllimport identity */ -//#endif - -/** - * curl_global_init() globally initializes cURL given a bitwise set of the - * different features of what to initialize. - */ -CURLcode curl_global_init(long flags) -{ - if(initialized++) - return CURLE_OK; - - /* Setup the default memory functions here (again) */ - Curl_cmalloc = (curl_malloc_callback)malloc; - Curl_cfree = (curl_free_callback)free; - Curl_crealloc = (curl_realloc_callback)realloc; - Curl_cstrdup = (curl_strdup_callback)system_strdup; - Curl_ccalloc = (curl_calloc_callback)calloc; -#if defined(WIN32) && defined(UNICODE) - Curl_cwcsdup = (curl_wcsdup_callback)_wcsdup; -#endif - - if(flags & CURL_GLOBAL_SSL) - if(!Curl_ssl_init()) { - DEBUGF(fprintf(stderr, "Error: Curl_ssl_init failed\n")); - return CURLE_FAILED_INIT; - } - - if(flags & CURL_GLOBAL_WIN32) - if(win32_init()) { - DEBUGF(fprintf(stderr, "Error: win32_init failed\n")); - return CURLE_FAILED_INIT; - } - -#ifdef __AMIGA__ - if(!Curl_amiga_init()) { - DEBUGF(fprintf(stderr, "Error: Curl_amiga_init failed\n")); - return CURLE_FAILED_INIT; - } -#endif - -#ifdef NETWARE - if(netware_init()) { - DEBUGF(fprintf(stderr, "Warning: LONG namespace not available\n")); - } -#endif - -#ifdef USE_LIBIDN - idna_init(); -#endif - - if(Curl_resolver_global_init()) { - DEBUGF(fprintf(stderr, "Error: resolver_global_init failed\n")); - return CURLE_FAILED_INIT; - } - -#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_INIT) - if(libssh2_init(0)) { - DEBUGF(fprintf(stderr, "Error: libssh2_init failed\n")); - return CURLE_FAILED_INIT; - } -#endif - - if(flags & CURL_GLOBAL_ACK_EINTR) - Curl_ack_eintr = 1; - - init_flags = flags; - - return CURLE_OK; -} - -/* - * curl_global_init_mem() globally initializes cURL and also registers the - * user provided callback routines. - */ -CURLcode curl_global_init_mem(long flags, curl_malloc_callback m, - curl_free_callback f, curl_realloc_callback r, - curl_strdup_callback s, curl_calloc_callback c) -{ - CURLcode result = CURLE_OK; - - /* Invalid input, return immediately */ - if(!m || !f || !r || !s || !c) - return CURLE_FAILED_INIT; - - if(initialized) { - /* Already initialized, don't do it again, but bump the variable anyway to - work like curl_global_init() and require the same amount of cleanup - calls. */ - initialized++; - return CURLE_OK; - } - - /* Call the actual init function first */ - result = curl_global_init(flags); - if(!result) { - Curl_cmalloc = m; - Curl_cfree = f; - Curl_cstrdup = s; - Curl_crealloc = r; - Curl_ccalloc = c; - } - - return result; -} - -/** - * curl_global_cleanup() globally cleanups cURL, uses the value of - * "init_flags" to determine what needs to be cleaned up and what doesn't. - */ -void curl_global_cleanup(void) -{ - if(!initialized) - return; - - if(--initialized) - return; - - Curl_global_host_cache_dtor(); - - if(init_flags & CURL_GLOBAL_SSL) - Curl_ssl_cleanup(); - - Curl_resolver_global_cleanup(); - - if(init_flags & CURL_GLOBAL_WIN32) - win32_cleanup(); - - Curl_amiga_cleanup(); - -#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_EXIT) - (void)libssh2_exit(); -#endif - - init_flags = 0; -} - -/* - * curl_easy_init() is the external interface to alloc, setup and init an - * easy handle that is returned. If anything goes wrong, NULL is returned. - */ -CURL *curl_easy_init(void) -{ - CURLcode result; - struct SessionHandle *data; - - /* Make sure we inited the global SSL stuff */ - if(!initialized) { - result = curl_global_init(CURL_GLOBAL_DEFAULT); - if(result) { - /* something in the global init failed, return nothing */ - DEBUGF(fprintf(stderr, "Error: curl_global_init failed\n")); - return NULL; - } - } - - /* We use curl_open() with undefined URL so far */ - result = Curl_open(&data); - if(result) { - DEBUGF(fprintf(stderr, "Error: Curl_open failed\n")); - return NULL; - } - - return data; -} - -/* - * curl_easy_setopt() is the external interface for setting options on an - * easy handle. - */ - -//#undef curl_easy_setopt -CURLcode curl_easy_setopt(CURL *curl, CURLoption tag, ...) -{ - va_list arg; - struct SessionHandle *data = curl; - CURLcode result; - - if(!curl) - return CURLE_BAD_FUNCTION_ARGUMENT; - - va_start(arg, tag); - - result = Curl_setopt(data, tag, arg); - - va_end(arg); - return result; -} - -#ifdef CURLDEBUG - -struct socketmonitor { - struct socketmonitor *next; /* the next node in the list or NULL */ - struct pollfd socket; /* socket info of what to monitor */ -}; - -struct events { - long ms; /* timeout, run the timeout function when reached */ - bool msbump; /* set TRUE when timeout is set by callback */ - int num_sockets; /* number of nodes in the monitor list */ - struct socketmonitor *list; /* list of sockets to monitor */ - int running_handles; /* store the returned number */ -}; - -/* events_timer - * - * Callback that gets called with a new value when the timeout should be - * updated. - */ - -static int events_timer(CURLM *multi, /* multi handle */ - long timeout_ms, /* see above */ - void *userp) /* private callback pointer */ -{ - struct events *ev = userp; - (void)multi; - if(timeout_ms == -1) - /* timeout removed */ - timeout_ms = 0; - else if(timeout_ms == 0) - /* timeout is already reached! */ - timeout_ms = 1; /* trigger asap */ - - ev->ms = timeout_ms; - ev->msbump = TRUE; - return 0; -} - - -/* poll2cselect - * - * convert from poll() bit definitions to libcurl's CURL_CSELECT_* ones - */ -static int poll2cselect(int pollmask) -{ - int omask=0; - if(pollmask & POLLIN) - omask |= CURL_CSELECT_IN; - if(pollmask & POLLOUT) - omask |= CURL_CSELECT_OUT; - if(pollmask & POLLERR) - omask |= CURL_CSELECT_ERR; - return omask; -} - - -/* socketcb2poll - * - * convert from libcurl' CURL_POLL_* bit definitions to poll()'s - */ -static short socketcb2poll(int pollmask) -{ - short omask=0; - if(pollmask & CURL_POLL_IN) - omask |= POLLIN; - if(pollmask & CURL_POLL_OUT) - omask |= POLLOUT; - return omask; -} - -/* events_socket - * - * Callback that gets called with information about socket activity to - * monitor. - */ -static int events_socket(CURL *easy, /* easy handle */ - curl_socket_t s, /* socket */ - int what, /* see above */ - void *userp, /* private callback - pointer */ - void *socketp) /* private socket - pointer */ -{ - struct events *ev = userp; - struct socketmonitor *m; - struct socketmonitor *prev=NULL; - -#if defined(CURL_DISABLE_VERBOSE_STRINGS) - (void) easy; -#endif - (void)socketp; - - m = ev->list; - while(m) { - if(m->socket.fd == s) { - - if(what == CURL_POLL_REMOVE) { - struct socketmonitor *nxt = m->next; - /* remove this node from the list of monitored sockets */ - if(prev) - prev->next = nxt; - else - ev->list = nxt; - free(m); - m = nxt; - infof(easy, "socket cb: socket %d REMOVED\n", s); - } - else { - /* The socket 's' is already being monitored, update the activity - mask. Convert from libcurl bitmask to the poll one. */ - m->socket.events = socketcb2poll(what); - infof(easy, "socket cb: socket %d UPDATED as %s%s\n", s, - what&CURL_POLL_IN?"IN":"", - what&CURL_POLL_OUT?"OUT":""); - } - break; - } - prev = m; - m = m->next; /* move to next node */ - } - if(!m) { - if(what == CURL_POLL_REMOVE) { - /* this happens a bit too often, libcurl fix perhaps? */ - /* fprintf(stderr, - "%s: socket %d asked to be REMOVED but not present!\n", - __func__, s); */ - } - else { - m = malloc(sizeof(struct socketmonitor)); - m->next = ev->list; - m->socket.fd = s; - m->socket.events = socketcb2poll(what); - m->socket.revents = 0; - ev->list = m; - infof(easy, "socket cb: socket %d ADDED as %s%s\n", s, - what&CURL_POLL_IN?"IN":"", - what&CURL_POLL_OUT?"OUT":""); - } - } - - return 0; -} - - -/* - * events_setup() - * - * Do the multi handle setups that only event-based transfers need. - */ -static void events_setup(CURLM *multi, struct events *ev) -{ - /* timer callback */ - curl_multi_setopt(multi, CURLMOPT_TIMERFUNCTION, events_timer); - curl_multi_setopt(multi, CURLMOPT_TIMERDATA, ev); - - /* socket callback */ - curl_multi_setopt(multi, CURLMOPT_SOCKETFUNCTION, events_socket); - curl_multi_setopt(multi, CURLMOPT_SOCKETDATA, ev); -} - - -/* wait_or_timeout() - * - * waits for activity on any of the given sockets, or the timeout to trigger. - */ - -static CURLcode wait_or_timeout(struct Curl_multi *multi, struct events *ev) -{ - bool done = FALSE; - CURLMcode mcode; - CURLcode result = CURLE_OK; - - while(!done) { - CURLMsg *msg; - struct socketmonitor *m; - struct pollfd *f; - struct pollfd fds[4]; - int numfds=0; - int pollrc; - int i; - struct timeval before; - struct timeval after; - - /* populate the fds[] array */ - for(m = ev->list, f=&fds[0]; m; m = m->next) { - f->fd = m->socket.fd; - f->events = m->socket.events; - f->revents = 0; - /* fprintf(stderr, "poll() %d check socket %d\n", numfds, f->fd); */ - f++; - numfds++; - } - - /* get the time stamp to use to figure out how long poll takes */ - before = curlx_tvnow(); - - /* wait for activity or timeout */ - pollrc = Curl_poll(fds, numfds, (int)ev->ms); - - after = curlx_tvnow(); - - ev->msbump = FALSE; /* reset here */ - - if(0 == pollrc) { - /* timeout! */ - ev->ms = 0; - /* fprintf(stderr, "call curl_multi_socket_action( TIMEOUT )\n"); */ - mcode = curl_multi_socket_action(multi, CURL_SOCKET_TIMEOUT, 0, - &ev->running_handles); - } - else if(pollrc > 0) { - /* loop over the monitored sockets to see which ones had activity */ - for(i = 0; i< numfds; i++) { - if(fds[i].revents) { - /* socket activity, tell libcurl */ - int act = poll2cselect(fds[i].revents); /* convert */ - infof(multi->easyp, "call curl_multi_socket_action( socket %d )\n", - fds[i].fd); - mcode = curl_multi_socket_action(multi, fds[i].fd, act, - &ev->running_handles); - } - } - - if(!ev->msbump) - /* If nothing updated the timeout, we decrease it by the spent time. - * If it was updated, it has the new timeout time stored already. - */ - ev->ms += curlx_tvdiff(after, before); - - } - else - return CURLE_RECV_ERROR; - - if(mcode) - return CURLE_URL_MALFORMAT; /* TODO: return a proper error! */ - - /* we don't really care about the "msgs_in_queue" value returned in the - second argument */ - msg = curl_multi_info_read(multi, &pollrc); - if(msg) { - result = msg->data.result; - done = TRUE; - } - } - - return result; -} - - -/* easy_events() - * - * Runs a transfer in a blocking manner using the events-based API - */ -static CURLcode easy_events(CURLM *multi) -{ - struct events evs= {2, FALSE, 0, NULL, 0}; - - /* if running event-based, do some further multi inits */ - events_setup(multi, &evs); - - return wait_or_timeout(multi, &evs); -} -#else /* CURLDEBUG */ -/* when not built with debug, this function doesn't exist */ -#define easy_events(x) CURLE_NOT_BUILT_IN -#endif - -static CURLcode easy_transfer(CURLM *multi) -{ - bool done = FALSE; - CURLMcode mcode = CURLM_OK; - CURLcode result = CURLE_OK; - struct timeval before; - int without_fds = 0; /* count number of consecutive returns from - curl_multi_wait() without any filedescriptors */ - - while(!done && !mcode) { - int still_running = 0; - int ret; - - before = curlx_tvnow(); - mcode = curl_multi_wait(multi, NULL, 0, 1000, &ret); - - if(mcode == CURLM_OK) { - if(ret == -1) { - /* poll() failed not on EINTR, indicate a network problem */ - result = CURLE_RECV_ERROR; - break; - } - else if(ret == 0) { - struct timeval after = curlx_tvnow(); - /* If it returns without any filedescriptor instantly, we need to - avoid busy-looping during periods where it has nothing particular - to wait for */ - if(curlx_tvdiff(after, before) <= 10) { - without_fds++; - if(without_fds > 2) { - int sleep_ms = without_fds < 10 ? (1 << (without_fds-1)): 1000; - Curl_wait_ms(sleep_ms); - } - } - else - /* it wasn't "instant", restart counter */ - without_fds = 0; - } - else - /* got file descriptor, restart counter */ - without_fds = 0; - - mcode = curl_multi_perform(multi, &still_running); - } - - /* only read 'still_running' if curl_multi_perform() return OK */ - if((mcode == CURLM_OK) && !still_running) { - int rc; - CURLMsg *msg = curl_multi_info_read(multi, &rc); - if(msg) { - result = msg->data.result; - done = TRUE; - } - } - } - - /* Make sure to return some kind of error if there was a multi problem */ - if(mcode) { - return (mcode == CURLM_OUT_OF_MEMORY) ? CURLE_OUT_OF_MEMORY : - /* The other multi errors should never happen, so return - something suitably generic */ - CURLE_BAD_FUNCTION_ARGUMENT; - } - - return result; -} - - -/* - * easy_perform() is the external interface that performs a blocking - * transfer as previously setup. - * - * CONCEPT: This function creates a multi handle, adds the easy handle to it, - * runs curl_multi_perform() until the transfer is done, then detaches the - * easy handle, destroys the multi handle and returns the easy handle's return - * code. - * - * REALITY: it can't just create and destroy the multi handle that easily. It - * needs to keep it around since if this easy handle is used again by this - * function, the same multi handle must be re-used so that the same pools and - * caches can be used. - * - * DEBUG: if 'events' is set TRUE, this function will use a replacement engine - * instead of curl_multi_perform() and use curl_multi_socket_action(). - */ -static CURLcode easy_perform(struct SessionHandle *data, bool events) -{ - CURLM *multi; - CURLMcode mcode; - CURLcode result = CURLE_OK; - SIGPIPE_VARIABLE(pipe_st); - - if(!data) - return CURLE_BAD_FUNCTION_ARGUMENT; - - if(data->multi) { - failf(data, "easy handle already used in multi handle"); - return CURLE_FAILED_INIT; - } - - if(data->multi_easy) - multi = data->multi_easy; - else { - /* this multi handle will only ever have a single easy handled attached - to it, so make it use minimal hashes */ - multi = Curl_multi_handle(1, 3); - if(!multi) - return CURLE_OUT_OF_MEMORY; - data->multi_easy = multi; - } - - /* Copy the MAXCONNECTS option to the multi handle */ - curl_multi_setopt(multi, CURLMOPT_MAXCONNECTS, data->set.maxconnects); - - mcode = curl_multi_add_handle(multi, data); - if(mcode) { - curl_multi_cleanup(multi); - if(mcode == CURLM_OUT_OF_MEMORY) - return CURLE_OUT_OF_MEMORY; - else - return CURLE_FAILED_INIT; - } - - sigpipe_ignore(data, &pipe_st); - - /* assign this after curl_multi_add_handle() since that function checks for - it and rejects this handle otherwise */ - data->multi = multi; - - /* run the transfer */ - result = events ? easy_events(multi) : easy_transfer(multi); - - /* ignoring the return code isn't nice, but atm we can't really handle - a failure here, room for future improvement! */ - (void)curl_multi_remove_handle(multi, data); - - sigpipe_restore(&pipe_st); - - /* The multi handle is kept alive, owned by the easy handle */ - return result; -} - - -/* - * curl_easy_perform() is the external interface that performs a blocking - * transfer as previously setup. - */ -CURLcode curl_easy_perform(CURL *easy) -{ - return easy_perform(easy, FALSE); -} - -#ifdef CURLDEBUG -/* - * curl_easy_perform_ev() is the external interface that performs a blocking - * transfer using the event-based API internally. - */ -CURLcode curl_easy_perform_ev(CURL *easy) -{ - return easy_perform(easy, TRUE); -} - -#endif - -/* - * curl_easy_cleanup() is the external interface to cleaning/freeing the given - * easy handle. - */ -void curl_easy_cleanup(CURL *curl) -{ - struct SessionHandle *data = (struct SessionHandle *)curl; - SIGPIPE_VARIABLE(pipe_st); - - if(!data) - return; - - sigpipe_ignore(data, &pipe_st); - Curl_close(data); - sigpipe_restore(&pipe_st); -} - -/* - * curl_easy_getinfo() is an external interface that allows an app to retrieve - * information from a performed transfer and similar. - */ -//#undef curl_easy_getinfo -CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...) -{ - va_list arg; - void *paramp; - CURLcode result; - struct SessionHandle *data = (struct SessionHandle *)curl; - - va_start(arg, info); - paramp = va_arg(arg, void *); - - result = Curl_getinfo(data, info, paramp); - - va_end(arg); - return result; -} - -/* - * curl_easy_duphandle() is an external interface to allow duplication of a - * given input easy handle. The returned handle will be a new working handle - * with all options set exactly as the input source handle. - */ -CURL *curl_easy_duphandle(CURL *incurl) -{ - struct SessionHandle *data=(struct SessionHandle *)incurl; - - struct SessionHandle *outcurl = calloc(1, sizeof(struct SessionHandle)); - if(NULL == outcurl) - goto fail; - - /* - * We setup a few buffers we need. We should probably make them - * get setup on-demand in the code, as that would probably decrease - * the likeliness of us forgetting to init a buffer here in the future. - */ - outcurl->state.headerbuff = malloc(HEADERSIZE); - if(!outcurl->state.headerbuff) - goto fail; - outcurl->state.headersize = HEADERSIZE; - - /* copy all userdefined values */ - if(Curl_dupset(outcurl, data)) - goto fail; - - /* the connection cache is setup on demand */ - outcurl->state.conn_cache = NULL; - - outcurl->state.lastconnect = NULL; - - outcurl->progress.flags = data->progress.flags; - outcurl->progress.callback = data->progress.callback; - - if(data->cookies) { - /* If cookies are enabled in the parent handle, we enable them - in the clone as well! */ - outcurl->cookies = Curl_cookie_init(data, - data->cookies->filename, - outcurl->cookies, - data->set.cookiesession); - if(!outcurl->cookies) - goto fail; - } - - /* duplicate all values in 'change' */ - if(data->change.cookielist) { - outcurl->change.cookielist = - Curl_slist_duplicate(data->change.cookielist); - if(!outcurl->change.cookielist) - goto fail; - } - - if(data->change.url) { - outcurl->change.url = strdup(data->change.url); - if(!outcurl->change.url) - goto fail; - outcurl->change.url_alloc = TRUE; - } - - if(data->change.referer) { - outcurl->change.referer = strdup(data->change.referer); - if(!outcurl->change.referer) - goto fail; - outcurl->change.referer_alloc = TRUE; - } - - /* Clone the resolver handle, if present, for the new handle */ - if(Curl_resolver_duphandle(&outcurl->state.resolver, - data->state.resolver)) - goto fail; - - Curl_convert_setup(outcurl); - - outcurl->magic = CURLEASY_MAGIC_NUMBER; - - /* we reach this point and thus we are OK */ - - return outcurl; - - fail: - - if(outcurl) { - curl_slist_free_all(outcurl->change.cookielist); - outcurl->change.cookielist = NULL; - Curl_safefree(outcurl->state.headerbuff); - Curl_safefree(outcurl->change.url); - Curl_safefree(outcurl->change.referer); - Curl_freeset(outcurl); - free(outcurl); - } - - return NULL; -} - -/* - * curl_easy_reset() is an external interface that allows an app to re- - * initialize a session handle to the default values. - */ -void curl_easy_reset(CURL *curl) -{ - struct SessionHandle *data = (struct SessionHandle *)curl; - - Curl_safefree(data->state.pathbuffer); - - data->state.path = NULL; - - Curl_free_request_state(data); - - /* zero out UserDefined data: */ - Curl_freeset(data); - memset(&data->set, 0, sizeof(struct UserDefined)); - (void)Curl_init_userdefined(&data->set); - - /* zero out Progress data: */ - memset(&data->progress, 0, sizeof(struct Progress)); - - data->progress.flags |= PGRS_HIDE; - data->state.current_speed = -1; /* init to negative == impossible */ -} - -/* - * curl_easy_pause() allows an application to pause or unpause a specific - * transfer and direction. This function sets the full new state for the - * current connection this easy handle operates on. - * - * NOTE: if you have the receiving paused and you call this function to remove - * the pausing, you may get your write callback called at this point. - * - * Action is a bitmask consisting of CURLPAUSE_* bits in curl/curl.h - */ -CURLcode curl_easy_pause(CURL *curl, int action) -{ - struct SessionHandle *data = (struct SessionHandle *)curl; - struct SingleRequest *k = &data->req; - CURLcode result = CURLE_OK; - - /* first switch off both pause bits */ - int newstate = k->keepon &~ (KEEP_RECV_PAUSE| KEEP_SEND_PAUSE); - - /* set the new desired pause bits */ - newstate |= ((action & CURLPAUSE_RECV)?KEEP_RECV_PAUSE:0) | - ((action & CURLPAUSE_SEND)?KEEP_SEND_PAUSE:0); - - /* put it back in the keepon */ - k->keepon = newstate; - - if(!(newstate & KEEP_RECV_PAUSE) && data->state.tempwrite) { - /* we have a buffer for sending that we now seem to be able to deliver - since the receive pausing is lifted! */ - - /* get the pointer in local copy since the function may return PAUSE - again and then we'll get a new copy allocted and stored in - the tempwrite variables */ - char *tempwrite = data->state.tempwrite; - - data->state.tempwrite = NULL; - result = Curl_client_chop_write(data->easy_conn, data->state.tempwritetype, - tempwrite, data->state.tempwritesize); - free(tempwrite); - } - - /* if there's no error and we're not pausing both directions, we want - to have this handle checked soon */ - if(!result && - ((newstate&(KEEP_RECV_PAUSE|KEEP_SEND_PAUSE)) != - (KEEP_RECV_PAUSE|KEEP_SEND_PAUSE)) ) - Curl_expire(data, 1); /* get this handle going again */ - - return result; -} - - -static CURLcode easy_connection(struct SessionHandle *data, - curl_socket_t *sfd, - struct connectdata **connp) -{ - if(data == NULL) - return CURLE_BAD_FUNCTION_ARGUMENT; - - /* only allow these to be called on handles with CURLOPT_CONNECT_ONLY */ - if(!data->set.connect_only) { - failf(data, "CONNECT_ONLY is required!"); - return CURLE_UNSUPPORTED_PROTOCOL; - } - - *sfd = Curl_getconnectinfo(data, connp); - - if(*sfd == CURL_SOCKET_BAD) { - failf(data, "Failed to get recent socket"); - return CURLE_UNSUPPORTED_PROTOCOL; - } - - return CURLE_OK; -} - -/* - * Receives data from the connected socket. Use after successful - * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. - * Returns CURLE_OK on success, error code on error. - */ -CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, size_t *n) -{ - curl_socket_t sfd; - CURLcode result; - ssize_t n1; - struct connectdata *c; - struct SessionHandle *data = (struct SessionHandle *)curl; - - result = easy_connection(data, &sfd, &c); - if(result) - return result; - - *n = 0; - result = Curl_read(c, sfd, buffer, buflen, &n1); - - if(result) - return result; - - *n = (size_t)n1; - - return CURLE_OK; -} - -/* - * Sends data over the connected socket. Use after successful - * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. - */ -CURLcode curl_easy_send(CURL *curl, const void *buffer, size_t buflen, - size_t *n) -{ - curl_socket_t sfd; - CURLcode result; - ssize_t n1; - struct connectdata *c = NULL; - struct SessionHandle *data = (struct SessionHandle *)curl; - - result = easy_connection(data, &sfd, &c); - if(result) - return result; - - *n = 0; - result = Curl_write(c, sfd, buffer, buflen, &n1); - - if(n1 == -1) - return CURLE_SEND_ERROR; - - /* detect EAGAIN */ - if(!result && !n1) - return CURLE_AGAIN; - - *n = (size_t)n1; - - return result; -} -- cgit v1.2.3