From 682f23e7bb4a52bedf46eff5c4859e1308eda124 Mon Sep 17 00:00:00 2001 From: Michał Cichoń Date: Tue, 25 Aug 2015 19:56:24 +0200 Subject: Update build ref --- libcurl/src/lib/easy.c | 1130 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1130 insertions(+) create mode 100644 libcurl/src/lib/easy.c (limited to 'libcurl/src/lib/easy.c') diff --git a/libcurl/src/lib/easy.c b/libcurl/src/lib/easy.c new file mode 100644 index 0000000..9492d3e --- /dev/null +++ b/libcurl/src/lib/easy.c @@ -0,0 +1,1130 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2015, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +/* + * See comment in curl_memory.h for the explanation of this sanity check. + */ + +#ifdef CURLX_NO_MEMORY_CALLBACKS +#error "libcurl shall not ever be built with CURLX_NO_MEMORY_CALLBACKS defined" +#endif + +#ifdef HAVE_NETINET_IN_H +#include +#endif +#ifdef HAVE_NETDB_H +#include +#endif +#ifdef HAVE_ARPA_INET_H +#include +#endif +#ifdef HAVE_NET_IF_H +#include +#endif +#ifdef HAVE_SYS_IOCTL_H +#include +#endif + +#ifdef HAVE_SYS_PARAM_H +#include +#endif + +#include "strequal.h" +#include "urldata.h" +#include +#include "transfer.h" +#include "vtls/vtls.h" +#include "url.h" +#include "getinfo.h" +#include "hostip.h" +#include "share.h" +#include "strdup.h" +#include "progress.h" +#include "easyif.h" +#include "select.h" +#include "sendf.h" /* for failf function prototype */ +#include "curl_ntlm.h" +#include "connect.h" /* for Curl_getconnectinfo */ +#include "slist.h" +#include "amigaos.h" +#include "non-ascii.h" +#include "warnless.h" +#include "conncache.h" +#include "multiif.h" +#include "sigpipe.h" +#include "ssh.h" +#include "curl_printf.h" + +/* The last #include files should be: */ +#include "curl_memory.h" +#include "memdebug.h" + +/* win32_cleanup() is for win32 socket cleanup functionality, the opposite + of win32_init() */ +static void win32_cleanup(void) +{ +#ifdef USE_WINSOCK + WSACleanup(); +#endif +#ifdef USE_WINDOWS_SSPI + Curl_sspi_global_cleanup(); +#endif +} + +/* win32_init() performs win32 socket initialization to properly setup the + stack to allow networking */ +static CURLcode win32_init(void) +{ +#ifdef USE_WINSOCK + WORD wVersionRequested; + WSADATA wsaData; + int res; + +#if defined(ENABLE_IPV6) && (USE_WINSOCK < 2) + Error IPV6_requires_winsock2 +#endif + + wVersionRequested = MAKEWORD(USE_WINSOCK, USE_WINSOCK); + + res = WSAStartup(wVersionRequested, &wsaData); + + if(res != 0) + /* Tell the user that we couldn't find a useable */ + /* winsock.dll. */ + return CURLE_FAILED_INIT; + + /* Confirm that the Windows Sockets DLL supports what we need.*/ + /* Note that if the DLL supports versions greater */ + /* than wVersionRequested, it will still return */ + /* wVersionRequested in wVersion. wHighVersion contains the */ + /* highest supported version. */ + + if(LOBYTE( wsaData.wVersion ) != LOBYTE(wVersionRequested) || + HIBYTE( wsaData.wVersion ) != HIBYTE(wVersionRequested) ) { + /* Tell the user that we couldn't find a useable */ + + /* winsock.dll. */ + WSACleanup(); + return CURLE_FAILED_INIT; + } + /* The Windows Sockets DLL is acceptable. Proceed. */ +#elif defined(USE_LWIPSOCK) + lwip_init(); +#endif + +#ifdef USE_WINDOWS_SSPI + { + CURLcode result = Curl_sspi_global_init(); + if(result) + return result; + } +#endif + + return CURLE_OK; +} + +#ifdef USE_LIBIDN +/* + * Initialise use of IDNA library. + * It falls back to ASCII if $CHARSET isn't defined. This doesn't work for + * idna_to_ascii_lz(). + */ +static void idna_init (void) +{ +#ifdef WIN32 + char buf[60]; + UINT cp = GetACP(); + + if(!getenv("CHARSET") && cp > 0) { + snprintf(buf, sizeof(buf), "CHARSET=cp%u", cp); + putenv(buf); + } +#else + /* to do? */ +#endif +} +#endif /* USE_LIBIDN */ + +/* true globals -- for curl_global_init() and curl_global_cleanup() */ +static unsigned int initialized; +static long init_flags; + +///* +// * strdup (and other memory functions) is redefined in complicated +// * ways, but at this point it must be defined as the system-supplied strdup +// * so the callback pointer is initialized correctly. +// */ +//#if defined(_WIN32_WCE) +//#define system_strdup _strdup +//#elif !defined(HAVE_STRDUP) +//#define system_strdup curlx_strdup +//#else +//#define system_strdup strdup +//#endif +// +//#if defined(_MSC_VER) && defined(_DLL) && !defined(__POCC__) +//# pragma warning(disable:4232) /* MSVC extension, dllimport identity */ +//#endif +// +//#ifndef __SYMBIAN32__ +///* +// * If a memory-using function (like curl_getenv) is used before +// * curl_global_init() is called, we need to have these pointers set already. +// */ +//curl_malloc_callback Curl_cmalloc = (curl_malloc_callback)malloc; +//curl_free_callback Curl_cfree = (curl_free_callback)free; +//curl_realloc_callback Curl_crealloc = (curl_realloc_callback)realloc; +//curl_strdup_callback Curl_cstrdup = (curl_strdup_callback)system_strdup; +//curl_calloc_callback Curl_ccalloc = (curl_calloc_callback)calloc; +//#if defined(WIN32) && defined(UNICODE) +//curl_wcsdup_callback Curl_cwcsdup = (curl_wcsdup_callback)_wcsdup; +//#endif +//#else +///* +// * Symbian OS doesn't support initialization to code in writeable static data. +// * Initialization will occur in the curl_global_init() call. +// */ +//curl_malloc_callback Curl_cmalloc; +//curl_free_callback Curl_cfree; +//curl_realloc_callback Curl_crealloc; +//curl_strdup_callback Curl_cstrdup; +//curl_calloc_callback Curl_ccalloc; +//#endif +// +//#if defined(_MSC_VER) && defined(_DLL) && !defined(__POCC__) +//# pragma warning(default:4232) /* MSVC extension, dllimport identity */ +//#endif + +/** + * curl_global_init() globally initializes cURL given a bitwise set of the + * different features of what to initialize. + */ +CURLcode curl_global_init(long flags) +{ + if(initialized++) + return CURLE_OK; + + /* Setup the default memory functions here (again) */ + Curl_cmalloc = (curl_malloc_callback)malloc; + Curl_cfree = (curl_free_callback)free; + Curl_crealloc = (curl_realloc_callback)realloc; + Curl_cstrdup = (curl_strdup_callback)system_strdup; + Curl_ccalloc = (curl_calloc_callback)calloc; +#if defined(WIN32) && defined(UNICODE) + Curl_cwcsdup = (curl_wcsdup_callback)_wcsdup; +#endif + + if(flags & CURL_GLOBAL_SSL) + if(!Curl_ssl_init()) { + DEBUGF(fprintf(stderr, "Error: Curl_ssl_init failed\n")); + return CURLE_FAILED_INIT; + } + + if(flags & CURL_GLOBAL_WIN32) + if(win32_init()) { + DEBUGF(fprintf(stderr, "Error: win32_init failed\n")); + return CURLE_FAILED_INIT; + } + +#ifdef __AMIGA__ + if(!Curl_amiga_init()) { + DEBUGF(fprintf(stderr, "Error: Curl_amiga_init failed\n")); + return CURLE_FAILED_INIT; + } +#endif + +#ifdef NETWARE + if(netware_init()) { + DEBUGF(fprintf(stderr, "Warning: LONG namespace not available\n")); + } +#endif + +#ifdef USE_LIBIDN + idna_init(); +#endif + + if(Curl_resolver_global_init()) { + DEBUGF(fprintf(stderr, "Error: resolver_global_init failed\n")); + return CURLE_FAILED_INIT; + } + +#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_INIT) + if(libssh2_init(0)) { + DEBUGF(fprintf(stderr, "Error: libssh2_init failed\n")); + return CURLE_FAILED_INIT; + } +#endif + + if(flags & CURL_GLOBAL_ACK_EINTR) + Curl_ack_eintr = 1; + + init_flags = flags; + + return CURLE_OK; +} + +/* + * curl_global_init_mem() globally initializes cURL and also registers the + * user provided callback routines. + */ +CURLcode curl_global_init_mem(long flags, curl_malloc_callback m, + curl_free_callback f, curl_realloc_callback r, + curl_strdup_callback s, curl_calloc_callback c) +{ + CURLcode result = CURLE_OK; + + /* Invalid input, return immediately */ + if(!m || !f || !r || !s || !c) + return CURLE_FAILED_INIT; + + if(initialized) { + /* Already initialized, don't do it again, but bump the variable anyway to + work like curl_global_init() and require the same amount of cleanup + calls. */ + initialized++; + return CURLE_OK; + } + + /* Call the actual init function first */ + result = curl_global_init(flags); + if(!result) { + Curl_cmalloc = m; + Curl_cfree = f; + Curl_cstrdup = s; + Curl_crealloc = r; + Curl_ccalloc = c; + } + + return result; +} + +/** + * curl_global_cleanup() globally cleanups cURL, uses the value of + * "init_flags" to determine what needs to be cleaned up and what doesn't. + */ +void curl_global_cleanup(void) +{ + if(!initialized) + return; + + if(--initialized) + return; + + Curl_global_host_cache_dtor(); + + if(init_flags & CURL_GLOBAL_SSL) + Curl_ssl_cleanup(); + + Curl_resolver_global_cleanup(); + + if(init_flags & CURL_GLOBAL_WIN32) + win32_cleanup(); + + Curl_amiga_cleanup(); + +#if defined(USE_LIBSSH2) && defined(HAVE_LIBSSH2_EXIT) + (void)libssh2_exit(); +#endif + + init_flags = 0; +} + +/* + * curl_easy_init() is the external interface to alloc, setup and init an + * easy handle that is returned. If anything goes wrong, NULL is returned. + */ +CURL *curl_easy_init(void) +{ + CURLcode result; + struct SessionHandle *data; + + /* Make sure we inited the global SSL stuff */ + if(!initialized) { + result = curl_global_init(CURL_GLOBAL_DEFAULT); + if(result) { + /* something in the global init failed, return nothing */ + DEBUGF(fprintf(stderr, "Error: curl_global_init failed\n")); + return NULL; + } + } + + /* We use curl_open() with undefined URL so far */ + result = Curl_open(&data); + if(result) { + DEBUGF(fprintf(stderr, "Error: Curl_open failed\n")); + return NULL; + } + + return data; +} + +/* + * curl_easy_setopt() is the external interface for setting options on an + * easy handle. + */ + +//#undef curl_easy_setopt +CURLcode curl_easy_setopt(CURL *curl, CURLoption tag, ...) +{ + va_list arg; + struct SessionHandle *data = curl; + CURLcode result; + + if(!curl) + return CURLE_BAD_FUNCTION_ARGUMENT; + + va_start(arg, tag); + + result = Curl_setopt(data, tag, arg); + + va_end(arg); + return result; +} + +#ifdef CURLDEBUG + +struct socketmonitor { + struct socketmonitor *next; /* the next node in the list or NULL */ + struct pollfd socket; /* socket info of what to monitor */ +}; + +struct events { + long ms; /* timeout, run the timeout function when reached */ + bool msbump; /* set TRUE when timeout is set by callback */ + int num_sockets; /* number of nodes in the monitor list */ + struct socketmonitor *list; /* list of sockets to monitor */ + int running_handles; /* store the returned number */ +}; + +/* events_timer + * + * Callback that gets called with a new value when the timeout should be + * updated. + */ + +static int events_timer(CURLM *multi, /* multi handle */ + long timeout_ms, /* see above */ + void *userp) /* private callback pointer */ +{ + struct events *ev = userp; + (void)multi; + if(timeout_ms == -1) + /* timeout removed */ + timeout_ms = 0; + else if(timeout_ms == 0) + /* timeout is already reached! */ + timeout_ms = 1; /* trigger asap */ + + ev->ms = timeout_ms; + ev->msbump = TRUE; + return 0; +} + + +/* poll2cselect + * + * convert from poll() bit definitions to libcurl's CURL_CSELECT_* ones + */ +static int poll2cselect(int pollmask) +{ + int omask=0; + if(pollmask & POLLIN) + omask |= CURL_CSELECT_IN; + if(pollmask & POLLOUT) + omask |= CURL_CSELECT_OUT; + if(pollmask & POLLERR) + omask |= CURL_CSELECT_ERR; + return omask; +} + + +/* socketcb2poll + * + * convert from libcurl' CURL_POLL_* bit definitions to poll()'s + */ +static short socketcb2poll(int pollmask) +{ + short omask=0; + if(pollmask & CURL_POLL_IN) + omask |= POLLIN; + if(pollmask & CURL_POLL_OUT) + omask |= POLLOUT; + return omask; +} + +/* events_socket + * + * Callback that gets called with information about socket activity to + * monitor. + */ +static int events_socket(CURL *easy, /* easy handle */ + curl_socket_t s, /* socket */ + int what, /* see above */ + void *userp, /* private callback + pointer */ + void *socketp) /* private socket + pointer */ +{ + struct events *ev = userp; + struct socketmonitor *m; + struct socketmonitor *prev=NULL; + +#if defined(CURL_DISABLE_VERBOSE_STRINGS) + (void) easy; +#endif + (void)socketp; + + m = ev->list; + while(m) { + if(m->socket.fd == s) { + + if(what == CURL_POLL_REMOVE) { + struct socketmonitor *nxt = m->next; + /* remove this node from the list of monitored sockets */ + if(prev) + prev->next = nxt; + else + ev->list = nxt; + free(m); + m = nxt; + infof(easy, "socket cb: socket %d REMOVED\n", s); + } + else { + /* The socket 's' is already being monitored, update the activity + mask. Convert from libcurl bitmask to the poll one. */ + m->socket.events = socketcb2poll(what); + infof(easy, "socket cb: socket %d UPDATED as %s%s\n", s, + what&CURL_POLL_IN?"IN":"", + what&CURL_POLL_OUT?"OUT":""); + } + break; + } + prev = m; + m = m->next; /* move to next node */ + } + if(!m) { + if(what == CURL_POLL_REMOVE) { + /* this happens a bit too often, libcurl fix perhaps? */ + /* fprintf(stderr, + "%s: socket %d asked to be REMOVED but not present!\n", + __func__, s); */ + } + else { + m = malloc(sizeof(struct socketmonitor)); + m->next = ev->list; + m->socket.fd = s; + m->socket.events = socketcb2poll(what); + m->socket.revents = 0; + ev->list = m; + infof(easy, "socket cb: socket %d ADDED as %s%s\n", s, + what&CURL_POLL_IN?"IN":"", + what&CURL_POLL_OUT?"OUT":""); + } + } + + return 0; +} + + +/* + * events_setup() + * + * Do the multi handle setups that only event-based transfers need. + */ +static void events_setup(CURLM *multi, struct events *ev) +{ + /* timer callback */ + curl_multi_setopt(multi, CURLMOPT_TIMERFUNCTION, events_timer); + curl_multi_setopt(multi, CURLMOPT_TIMERDATA, ev); + + /* socket callback */ + curl_multi_setopt(multi, CURLMOPT_SOCKETFUNCTION, events_socket); + curl_multi_setopt(multi, CURLMOPT_SOCKETDATA, ev); +} + + +/* wait_or_timeout() + * + * waits for activity on any of the given sockets, or the timeout to trigger. + */ + +static CURLcode wait_or_timeout(struct Curl_multi *multi, struct events *ev) +{ + bool done = FALSE; + CURLMcode mcode; + CURLcode result = CURLE_OK; + + while(!done) { + CURLMsg *msg; + struct socketmonitor *m; + struct pollfd *f; + struct pollfd fds[4]; + int numfds=0; + int pollrc; + int i; + struct timeval before; + struct timeval after; + + /* populate the fds[] array */ + for(m = ev->list, f=&fds[0]; m; m = m->next) { + f->fd = m->socket.fd; + f->events = m->socket.events; + f->revents = 0; + /* fprintf(stderr, "poll() %d check socket %d\n", numfds, f->fd); */ + f++; + numfds++; + } + + /* get the time stamp to use to figure out how long poll takes */ + before = curlx_tvnow(); + + /* wait for activity or timeout */ + pollrc = Curl_poll(fds, numfds, (int)ev->ms); + + after = curlx_tvnow(); + + ev->msbump = FALSE; /* reset here */ + + if(0 == pollrc) { + /* timeout! */ + ev->ms = 0; + /* fprintf(stderr, "call curl_multi_socket_action( TIMEOUT )\n"); */ + mcode = curl_multi_socket_action(multi, CURL_SOCKET_TIMEOUT, 0, + &ev->running_handles); + } + else if(pollrc > 0) { + /* loop over the monitored sockets to see which ones had activity */ + for(i = 0; i< numfds; i++) { + if(fds[i].revents) { + /* socket activity, tell libcurl */ + int act = poll2cselect(fds[i].revents); /* convert */ + infof(multi->easyp, "call curl_multi_socket_action( socket %d )\n", + fds[i].fd); + mcode = curl_multi_socket_action(multi, fds[i].fd, act, + &ev->running_handles); + } + } + + if(!ev->msbump) + /* If nothing updated the timeout, we decrease it by the spent time. + * If it was updated, it has the new timeout time stored already. + */ + ev->ms += curlx_tvdiff(after, before); + + } + else + return CURLE_RECV_ERROR; + + if(mcode) + return CURLE_URL_MALFORMAT; /* TODO: return a proper error! */ + + /* we don't really care about the "msgs_in_queue" value returned in the + second argument */ + msg = curl_multi_info_read(multi, &pollrc); + if(msg) { + result = msg->data.result; + done = TRUE; + } + } + + return result; +} + + +/* easy_events() + * + * Runs a transfer in a blocking manner using the events-based API + */ +static CURLcode easy_events(CURLM *multi) +{ + struct events evs= {2, FALSE, 0, NULL, 0}; + + /* if running event-based, do some further multi inits */ + events_setup(multi, &evs); + + return wait_or_timeout(multi, &evs); +} +#else /* CURLDEBUG */ +/* when not built with debug, this function doesn't exist */ +#define easy_events(x) CURLE_NOT_BUILT_IN +#endif + +static CURLcode easy_transfer(CURLM *multi) +{ + bool done = FALSE; + CURLMcode mcode = CURLM_OK; + CURLcode result = CURLE_OK; + struct timeval before; + int without_fds = 0; /* count number of consecutive returns from + curl_multi_wait() without any filedescriptors */ + + while(!done && !mcode) { + int still_running = 0; + int ret; + + before = curlx_tvnow(); + mcode = curl_multi_wait(multi, NULL, 0, 1000, &ret); + + if(mcode == CURLM_OK) { + if(ret == -1) { + /* poll() failed not on EINTR, indicate a network problem */ + result = CURLE_RECV_ERROR; + break; + } + else if(ret == 0) { + struct timeval after = curlx_tvnow(); + /* If it returns without any filedescriptor instantly, we need to + avoid busy-looping during periods where it has nothing particular + to wait for */ + if(curlx_tvdiff(after, before) <= 10) { + without_fds++; + if(without_fds > 2) { + int sleep_ms = without_fds < 10 ? (1 << (without_fds-1)): 1000; + Curl_wait_ms(sleep_ms); + } + } + else + /* it wasn't "instant", restart counter */ + without_fds = 0; + } + else + /* got file descriptor, restart counter */ + without_fds = 0; + + mcode = curl_multi_perform(multi, &still_running); + } + + /* only read 'still_running' if curl_multi_perform() return OK */ + if((mcode == CURLM_OK) && !still_running) { + int rc; + CURLMsg *msg = curl_multi_info_read(multi, &rc); + if(msg) { + result = msg->data.result; + done = TRUE; + } + } + } + + /* Make sure to return some kind of error if there was a multi problem */ + if(mcode) { + return (mcode == CURLM_OUT_OF_MEMORY) ? CURLE_OUT_OF_MEMORY : + /* The other multi errors should never happen, so return + something suitably generic */ + CURLE_BAD_FUNCTION_ARGUMENT; + } + + return result; +} + + +/* + * easy_perform() is the external interface that performs a blocking + * transfer as previously setup. + * + * CONCEPT: This function creates a multi handle, adds the easy handle to it, + * runs curl_multi_perform() until the transfer is done, then detaches the + * easy handle, destroys the multi handle and returns the easy handle's return + * code. + * + * REALITY: it can't just create and destroy the multi handle that easily. It + * needs to keep it around since if this easy handle is used again by this + * function, the same multi handle must be re-used so that the same pools and + * caches can be used. + * + * DEBUG: if 'events' is set TRUE, this function will use a replacement engine + * instead of curl_multi_perform() and use curl_multi_socket_action(). + */ +static CURLcode easy_perform(struct SessionHandle *data, bool events) +{ + CURLM *multi; + CURLMcode mcode; + CURLcode result = CURLE_OK; + SIGPIPE_VARIABLE(pipe_st); + + if(!data) + return CURLE_BAD_FUNCTION_ARGUMENT; + + if(data->multi) { + failf(data, "easy handle already used in multi handle"); + return CURLE_FAILED_INIT; + } + + if(data->multi_easy) + multi = data->multi_easy; + else { + /* this multi handle will only ever have a single easy handled attached + to it, so make it use minimal hashes */ + multi = Curl_multi_handle(1, 3); + if(!multi) + return CURLE_OUT_OF_MEMORY; + data->multi_easy = multi; + } + + /* Copy the MAXCONNECTS option to the multi handle */ + curl_multi_setopt(multi, CURLMOPT_MAXCONNECTS, data->set.maxconnects); + + mcode = curl_multi_add_handle(multi, data); + if(mcode) { + curl_multi_cleanup(multi); + if(mcode == CURLM_OUT_OF_MEMORY) + return CURLE_OUT_OF_MEMORY; + else + return CURLE_FAILED_INIT; + } + + sigpipe_ignore(data, &pipe_st); + + /* assign this after curl_multi_add_handle() since that function checks for + it and rejects this handle otherwise */ + data->multi = multi; + + /* run the transfer */ + result = events ? easy_events(multi) : easy_transfer(multi); + + /* ignoring the return code isn't nice, but atm we can't really handle + a failure here, room for future improvement! */ + (void)curl_multi_remove_handle(multi, data); + + sigpipe_restore(&pipe_st); + + /* The multi handle is kept alive, owned by the easy handle */ + return result; +} + + +/* + * curl_easy_perform() is the external interface that performs a blocking + * transfer as previously setup. + */ +CURLcode curl_easy_perform(CURL *easy) +{ + return easy_perform(easy, FALSE); +} + +#ifdef CURLDEBUG +/* + * curl_easy_perform_ev() is the external interface that performs a blocking + * transfer using the event-based API internally. + */ +CURLcode curl_easy_perform_ev(CURL *easy) +{ + return easy_perform(easy, TRUE); +} + +#endif + +/* + * curl_easy_cleanup() is the external interface to cleaning/freeing the given + * easy handle. + */ +void curl_easy_cleanup(CURL *curl) +{ + struct SessionHandle *data = (struct SessionHandle *)curl; + SIGPIPE_VARIABLE(pipe_st); + + if(!data) + return; + + sigpipe_ignore(data, &pipe_st); + Curl_close(data); + sigpipe_restore(&pipe_st); +} + +/* + * curl_easy_getinfo() is an external interface that allows an app to retrieve + * information from a performed transfer and similar. + */ +//#undef curl_easy_getinfo +CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...) +{ + va_list arg; + void *paramp; + CURLcode result; + struct SessionHandle *data = (struct SessionHandle *)curl; + + va_start(arg, info); + paramp = va_arg(arg, void *); + + result = Curl_getinfo(data, info, paramp); + + va_end(arg); + return result; +} + +/* + * curl_easy_duphandle() is an external interface to allow duplication of a + * given input easy handle. The returned handle will be a new working handle + * with all options set exactly as the input source handle. + */ +CURL *curl_easy_duphandle(CURL *incurl) +{ + struct SessionHandle *data=(struct SessionHandle *)incurl; + + struct SessionHandle *outcurl = calloc(1, sizeof(struct SessionHandle)); + if(NULL == outcurl) + goto fail; + + /* + * We setup a few buffers we need. We should probably make them + * get setup on-demand in the code, as that would probably decrease + * the likeliness of us forgetting to init a buffer here in the future. + */ + outcurl->state.headerbuff = malloc(HEADERSIZE); + if(!outcurl->state.headerbuff) + goto fail; + outcurl->state.headersize = HEADERSIZE; + + /* copy all userdefined values */ + if(Curl_dupset(outcurl, data)) + goto fail; + + /* the connection cache is setup on demand */ + outcurl->state.conn_cache = NULL; + + outcurl->state.lastconnect = NULL; + + outcurl->progress.flags = data->progress.flags; + outcurl->progress.callback = data->progress.callback; + + if(data->cookies) { + /* If cookies are enabled in the parent handle, we enable them + in the clone as well! */ + outcurl->cookies = Curl_cookie_init(data, + data->cookies->filename, + outcurl->cookies, + data->set.cookiesession); + if(!outcurl->cookies) + goto fail; + } + + /* duplicate all values in 'change' */ + if(data->change.cookielist) { + outcurl->change.cookielist = + Curl_slist_duplicate(data->change.cookielist); + if(!outcurl->change.cookielist) + goto fail; + } + + if(data->change.url) { + outcurl->change.url = strdup(data->change.url); + if(!outcurl->change.url) + goto fail; + outcurl->change.url_alloc = TRUE; + } + + if(data->change.referer) { + outcurl->change.referer = strdup(data->change.referer); + if(!outcurl->change.referer) + goto fail; + outcurl->change.referer_alloc = TRUE; + } + + /* Clone the resolver handle, if present, for the new handle */ + if(Curl_resolver_duphandle(&outcurl->state.resolver, + data->state.resolver)) + goto fail; + + Curl_convert_setup(outcurl); + + outcurl->magic = CURLEASY_MAGIC_NUMBER; + + /* we reach this point and thus we are OK */ + + return outcurl; + + fail: + + if(outcurl) { + curl_slist_free_all(outcurl->change.cookielist); + outcurl->change.cookielist = NULL; + Curl_safefree(outcurl->state.headerbuff); + Curl_safefree(outcurl->change.url); + Curl_safefree(outcurl->change.referer); + Curl_freeset(outcurl); + free(outcurl); + } + + return NULL; +} + +/* + * curl_easy_reset() is an external interface that allows an app to re- + * initialize a session handle to the default values. + */ +void curl_easy_reset(CURL *curl) +{ + struct SessionHandle *data = (struct SessionHandle *)curl; + + Curl_safefree(data->state.pathbuffer); + + data->state.path = NULL; + + Curl_free_request_state(data); + + /* zero out UserDefined data: */ + Curl_freeset(data); + memset(&data->set, 0, sizeof(struct UserDefined)); + (void)Curl_init_userdefined(&data->set); + + /* zero out Progress data: */ + memset(&data->progress, 0, sizeof(struct Progress)); + + data->progress.flags |= PGRS_HIDE; + data->state.current_speed = -1; /* init to negative == impossible */ +} + +/* + * curl_easy_pause() allows an application to pause or unpause a specific + * transfer and direction. This function sets the full new state for the + * current connection this easy handle operates on. + * + * NOTE: if you have the receiving paused and you call this function to remove + * the pausing, you may get your write callback called at this point. + * + * Action is a bitmask consisting of CURLPAUSE_* bits in curl/curl.h + */ +CURLcode curl_easy_pause(CURL *curl, int action) +{ + struct SessionHandle *data = (struct SessionHandle *)curl; + struct SingleRequest *k = &data->req; + CURLcode result = CURLE_OK; + + /* first switch off both pause bits */ + int newstate = k->keepon &~ (KEEP_RECV_PAUSE| KEEP_SEND_PAUSE); + + /* set the new desired pause bits */ + newstate |= ((action & CURLPAUSE_RECV)?KEEP_RECV_PAUSE:0) | + ((action & CURLPAUSE_SEND)?KEEP_SEND_PAUSE:0); + + /* put it back in the keepon */ + k->keepon = newstate; + + if(!(newstate & KEEP_RECV_PAUSE) && data->state.tempwrite) { + /* we have a buffer for sending that we now seem to be able to deliver + since the receive pausing is lifted! */ + + /* get the pointer in local copy since the function may return PAUSE + again and then we'll get a new copy allocted and stored in + the tempwrite variables */ + char *tempwrite = data->state.tempwrite; + + data->state.tempwrite = NULL; + result = Curl_client_chop_write(data->easy_conn, data->state.tempwritetype, + tempwrite, data->state.tempwritesize); + free(tempwrite); + } + + /* if there's no error and we're not pausing both directions, we want + to have this handle checked soon */ + if(!result && + ((newstate&(KEEP_RECV_PAUSE|KEEP_SEND_PAUSE)) != + (KEEP_RECV_PAUSE|KEEP_SEND_PAUSE)) ) + Curl_expire(data, 1); /* get this handle going again */ + + return result; +} + + +static CURLcode easy_connection(struct SessionHandle *data, + curl_socket_t *sfd, + struct connectdata **connp) +{ + if(data == NULL) + return CURLE_BAD_FUNCTION_ARGUMENT; + + /* only allow these to be called on handles with CURLOPT_CONNECT_ONLY */ + if(!data->set.connect_only) { + failf(data, "CONNECT_ONLY is required!"); + return CURLE_UNSUPPORTED_PROTOCOL; + } + + *sfd = Curl_getconnectinfo(data, connp); + + if(*sfd == CURL_SOCKET_BAD) { + failf(data, "Failed to get recent socket"); + return CURLE_UNSUPPORTED_PROTOCOL; + } + + return CURLE_OK; +} + +/* + * Receives data from the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + * Returns CURLE_OK on success, error code on error. + */ +CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, size_t *n) +{ + curl_socket_t sfd; + CURLcode result; + ssize_t n1; + struct connectdata *c; + struct SessionHandle *data = (struct SessionHandle *)curl; + + result = easy_connection(data, &sfd, &c); + if(result) + return result; + + *n = 0; + result = Curl_read(c, sfd, buffer, buflen, &n1); + + if(result) + return result; + + *n = (size_t)n1; + + return CURLE_OK; +} + +/* + * Sends data over the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + */ +CURLcode curl_easy_send(CURL *curl, const void *buffer, size_t buflen, + size_t *n) +{ + curl_socket_t sfd; + CURLcode result; + ssize_t n1; + struct connectdata *c = NULL; + struct SessionHandle *data = (struct SessionHandle *)curl; + + result = easy_connection(data, &sfd, &c); + if(result) + return result; + + *n = 0; + result = Curl_write(c, sfd, buffer, buflen, &n1); + + if(n1 == -1) + return CURLE_SEND_ERROR; + + /* detect EAGAIN */ + if(!result && !n1) + return CURLE_AGAIN; + + *n = (size_t)n1; + + return result; +} -- cgit v1.2.3