From 682f23e7bb4a52bedf46eff5c4859e1308eda124 Mon Sep 17 00:00:00 2001 From: Michał Cichoń Date: Tue, 25 Aug 2015 19:56:24 +0200 Subject: Update build ref --- libcurl/src/lib/pop3.c | 1601 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1601 insertions(+) create mode 100644 libcurl/src/lib/pop3.c (limited to 'libcurl/src/lib/pop3.c') diff --git a/libcurl/src/lib/pop3.c b/libcurl/src/lib/pop3.c new file mode 100644 index 0000000..d676b63 --- /dev/null +++ b/libcurl/src/lib/pop3.c @@ -0,0 +1,1601 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2015, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * RFC1734 POP3 Authentication + * RFC1939 POP3 protocol + * RFC2195 CRAM-MD5 authentication + * RFC2384 POP URL Scheme + * RFC2449 POP3 Extension Mechanism + * RFC2595 Using TLS with IMAP, POP3 and ACAP + * RFC2831 DIGEST-MD5 authentication + * RFC4422 Simple Authentication and Security Layer (SASL) + * RFC4616 PLAIN authentication + * RFC4752 The Kerberos V5 ("GSSAPI") SASL Mechanism + * RFC5034 POP3 SASL Authentication Mechanism + * RFC6749 OAuth 2.0 Authorization Framework + * Draft LOGIN SASL Mechanism + * + ***************************************************************************/ + +#include "curl_setup.h" + +#ifndef CURL_DISABLE_POP3 + +#ifdef HAVE_NETINET_IN_H +#include +#endif +#ifdef HAVE_ARPA_INET_H +#include +#endif +#ifdef HAVE_UTSNAME_H +#include +#endif +#ifdef HAVE_NETDB_H +#include +#endif +#ifdef __VMS +#include +#include +#endif + +#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) +#undef in_addr_t +#define in_addr_t unsigned long +#endif + +#include +#include "urldata.h" +#include "sendf.h" +#include "hostip.h" +#include "progress.h" +#include "transfer.h" +#include "escape.h" +#include "http.h" /* for HTTP proxy tunnel stuff */ +#include "socks.h" +#include "pop3.h" + +#include "strtoofft.h" +#include "strequal.h" +#include "vtls/vtls.h" +#include "connect.h" +#include "strerror.h" +#include "select.h" +#include "multiif.h" +#include "url.h" +#include "rawstr.h" +#include "curl_sasl.h" +#include "curl_md5.h" +#include "warnless.h" +#include "curl_printf.h" +#include "curl_memory.h" +/* The last #include file should be: */ +#include "memdebug.h" + +/* Local API functions */ +static CURLcode pop3_regular_transfer(struct connectdata *conn, bool *done); +static CURLcode pop3_do(struct connectdata *conn, bool *done); +static CURLcode pop3_done(struct connectdata *conn, CURLcode status, + bool premature); +static CURLcode pop3_connect(struct connectdata *conn, bool *done); +static CURLcode pop3_disconnect(struct connectdata *conn, bool dead); +static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done); +static int pop3_getsock(struct connectdata *conn, curl_socket_t *socks, + int numsocks); +static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done); +static CURLcode pop3_setup_connection(struct connectdata *conn); +static CURLcode pop3_parse_url_options(struct connectdata *conn); +static CURLcode pop3_parse_url_path(struct connectdata *conn); +static CURLcode pop3_parse_custom_request(struct connectdata *conn); +static CURLcode pop3_perform_auth(struct connectdata *conn, const char *mech, + const char *initresp); +static CURLcode pop3_continue_auth(struct connectdata *conn, const char *resp); +static void pop3_get_message(char *buffer, char** outptr); + +/* + * POP3 protocol handler. + */ + +const struct Curl_handler Curl_handler_pop3 = { + "POP3", /* scheme */ + pop3_setup_connection, /* setup_connection */ + pop3_do, /* do_it */ + pop3_done, /* done */ + ZERO_NULL, /* do_more */ + pop3_connect, /* connect_it */ + pop3_multi_statemach, /* connecting */ + pop3_doing, /* doing */ + pop3_getsock, /* proto_getsock */ + pop3_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + pop3_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3, /* defport */ + CURLPROTO_POP3, /* protocol */ + PROTOPT_CLOSEACTION | PROTOPT_NOURLQUERY /* flags */ +}; + +#ifdef USE_SSL +/* + * POP3S protocol handler. + */ + +const struct Curl_handler Curl_handler_pop3s = { + "POP3S", /* scheme */ + pop3_setup_connection, /* setup_connection */ + pop3_do, /* do_it */ + pop3_done, /* done */ + ZERO_NULL, /* do_more */ + pop3_connect, /* connect_it */ + pop3_multi_statemach, /* connecting */ + pop3_doing, /* doing */ + pop3_getsock, /* proto_getsock */ + pop3_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + pop3_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3S, /* defport */ + CURLPROTO_POP3S, /* protocol */ + PROTOPT_CLOSEACTION | PROTOPT_SSL + | PROTOPT_NOURLQUERY /* flags */ +}; +#endif + +#ifndef CURL_DISABLE_HTTP +/* + * HTTP-proxyed POP3 protocol handler. + */ + +static const struct Curl_handler Curl_handler_pop3_proxy = { + "POP3", /* scheme */ + Curl_http_setup_conn, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3, /* defport */ + CURLPROTO_HTTP, /* protocol */ + PROTOPT_NONE /* flags */ +}; + +#ifdef USE_SSL +/* + * HTTP-proxyed POP3S protocol handler. + */ + +static const struct Curl_handler Curl_handler_pop3s_proxy = { + "POP3S", /* scheme */ + Curl_http_setup_conn, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3S, /* defport */ + CURLPROTO_HTTP, /* protocol */ + PROTOPT_NONE /* flags */ +}; +#endif +#endif + +/* SASL parameters for the pop3 protocol */ +static const struct SASLproto saslpop3 = { + "pop", /* The service name */ + '+', /* Code received when continuation is expected */ + '+', /* Code to receive upon authentication success */ + 255 - 8, /* Maximum initial response length (no max) */ + pop3_perform_auth, /* Send authentication command */ + pop3_continue_auth, /* Send authentication continuation */ + pop3_get_message /* Get SASL response message */ +}; + +#ifdef USE_SSL +static void pop3_to_pop3s(struct connectdata *conn) +{ + conn->handler = &Curl_handler_pop3s; +} +#else +#define pop3_to_pop3s(x) Curl_nop_stmt +#endif + +/*********************************************************************** + * + * pop3_endofresp() + * + * Checks for an ending POP3 status code at the start of the given string, but + * also detects the APOP timestamp from the server greeting and various + * capabilities from the CAPA response including the supported authentication + * types and allowed SASL mechanisms. + */ +static bool pop3_endofresp(struct connectdata *conn, char *line, size_t len, + int *resp) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + + /* Do we have an error response? */ + if(len >= 4 && !memcmp("-ERR", line, 4)) { + *resp = '-'; + + return TRUE; + } + + /* Are we processing CAPA command responses? */ + if(pop3c->state == POP3_CAPA) { + /* Do we have the terminating line? */ + if(len >= 1 && !memcmp(line, ".", 1)) + *resp = '+'; + else + *resp = '*'; + + return TRUE; + } + + /* Do we have a command or continuation response? */ + if((len >= 3 && !memcmp("+OK", line, 3)) || + (len >= 1 && !memcmp("+", line, 1))) { + *resp = '+'; + + return TRUE; + } + + return FALSE; /* Nothing for us */ +} + +/*********************************************************************** + * + * pop3_get_message() + * + * Gets the authentication message from the response buffer. + */ +static void pop3_get_message(char *buffer, char** outptr) +{ + size_t len = 0; + char* message = NULL; + + /* Find the start of the message */ + for(message = buffer + 2; *message == ' ' || *message == '\t'; message++) + ; + + /* Find the end of the message */ + for(len = strlen(message); len--;) + if(message[len] != '\r' && message[len] != '\n' && message[len] != ' ' && + message[len] != '\t') + break; + + /* Terminate the message */ + if(++len) { + message[len] = '\0'; + } + + *outptr = message; +} + +/*********************************************************************** + * + * state() + * + * This is the ONLY way to change POP3 state! + */ +static void state(struct connectdata *conn, pop3state newstate) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + /* for debug purposes */ + static const char * const names[] = { + "STOP", + "SERVERGREET", + "CAPA", + "STARTTLS", + "UPGRADETLS", + "AUTH", + "APOP", + "USER", + "PASS", + "COMMAND", + "QUIT", + /* LAST */ + }; + + if(pop3c->state != newstate) + infof(conn->data, "POP3 %p state change from %s to %s\n", + (void *)pop3c, names[pop3c->state], names[newstate]); +#endif + + pop3c->state = newstate; +} + +/*********************************************************************** + * + * pop3_perform_capa() + * + * Sends the CAPA command in order to obtain a list of server side supported + * capabilities. + */ +static CURLcode pop3_perform_capa(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + pop3c->sasl.authmechs = SASL_AUTH_NONE; /* No known auth. mechanisms yet */ + pop3c->sasl.authused = SASL_AUTH_NONE; /* Clear the auth. mechanism used */ + pop3c->tls_supported = FALSE; /* Clear the TLS capability */ + + /* Send the CAPA command */ + result = Curl_pp_sendf(&pop3c->pp, "%s", "CAPA"); + + if(!result) + state(conn, POP3_CAPA); + + return result; +} + +/*********************************************************************** + * + * pop3_perform_starttls() + * + * Sends the STLS command to start the upgrade to TLS. + */ +static CURLcode pop3_perform_starttls(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + /* Send the STLS command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "STLS"); + + if(!result) + state(conn, POP3_STARTTLS); + + return result; +} + +/*********************************************************************** + * + * pop3_perform_upgrade_tls() + * + * Performs the upgrade to TLS. + */ +static CURLcode pop3_perform_upgrade_tls(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + /* Start the SSL connection */ + result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &pop3c->ssldone); + + if(!result) { + if(pop3c->state != POP3_UPGRADETLS) + state(conn, POP3_UPGRADETLS); + + if(pop3c->ssldone) { + pop3_to_pop3s(conn); + result = pop3_perform_capa(conn); + } + } + + return result; +} + +/*********************************************************************** + * + * pop3_perform_user() + * + * Sends a clear text USER command to authenticate with. + */ +static CURLcode pop3_perform_user(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + /* Check we have a username and password to authenticate with and end the + connect phase if we don't */ + if(!conn->bits.user_passwd) { + state(conn, POP3_STOP); + + return result; + } + + /* Send the USER command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "USER %s", + conn->user ? conn->user : ""); + if(!result) + state(conn, POP3_USER); + + return result; +} + +#ifndef CURL_DISABLE_CRYPTO_AUTH +/*********************************************************************** + * + * pop3_perform_apop() + * + * Sends an APOP command to authenticate with. + */ +static CURLcode pop3_perform_apop(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + size_t i; + MD5_context *ctxt; + unsigned char digest[MD5_DIGEST_LEN]; + char secret[2 * MD5_DIGEST_LEN + 1]; + + /* Check we have a username and password to authenticate with and end the + connect phase if we don't */ + if(!conn->bits.user_passwd) { + state(conn, POP3_STOP); + + return result; + } + + /* Create the digest */ + ctxt = Curl_MD5_init(Curl_DIGEST_MD5); + if(!ctxt) + return CURLE_OUT_OF_MEMORY; + + Curl_MD5_update(ctxt, (const unsigned char *) pop3c->apoptimestamp, + curlx_uztoui(strlen(pop3c->apoptimestamp))); + + Curl_MD5_update(ctxt, (const unsigned char *) conn->passwd, + curlx_uztoui(strlen(conn->passwd))); + + /* Finalise the digest */ + Curl_MD5_final(ctxt, digest); + + /* Convert the calculated 16 octet digest into a 32 byte hex string */ + for(i = 0; i < MD5_DIGEST_LEN; i++) + snprintf(&secret[2 * i], 3, "%02x", digest[i]); + + result = Curl_pp_sendf(&pop3c->pp, "APOP %s %s", conn->user, secret); + + if(!result) + state(conn, POP3_APOP); + + return result; +} +#endif + +/*********************************************************************** + * + * pop3_perform_auth() + * + * Sends an AUTH command allowing the client to login with the given SASL + * authentication mechanism. + */ +static CURLcode pop3_perform_auth(struct connectdata *conn, + const char *mech, + const char *initresp) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + if(initresp) { /* AUTH ... */ + /* Send the AUTH command with the initial response */ + result = Curl_pp_sendf(&pop3c->pp, "AUTH %s %s", mech, initresp); + } + else { + /* Send the AUTH command */ + result = Curl_pp_sendf(&pop3c->pp, "AUTH %s", mech); + } + + return result; +} + +/*********************************************************************** + * + * pop3_continue_auth() + * + * Sends SASL continuation data or cancellation. + */ +static CURLcode pop3_continue_auth(struct connectdata *conn, + const char *resp) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + + return Curl_pp_sendf(&pop3c->pp, "%s", resp); +} + +/*********************************************************************** + * + * pop3_perform_authentication() + * + * Initiates the authentication sequence, with the appropriate SASL + * authentication mechanism, falling back to APOP and clear text should a + * common mechanism not be available between the client and server. + */ +static CURLcode pop3_perform_authentication(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + saslprogress progress = SASL_IDLE; + + /* Check we have enough data to authenticate with and end the + connect phase if we don't */ + if(!Curl_sasl_can_authenticate(&pop3c->sasl, conn)) { + state(conn, POP3_STOP); + return result; + } + + if(pop3c->authtypes & pop3c->preftype & POP3_TYPE_SASL) { + /* Calculate the SASL login details */ + result = Curl_sasl_start(&pop3c->sasl, conn, FALSE, &progress); + + if(!result) + if(progress == SASL_INPROGRESS) + state(conn, POP3_AUTH); + } + + if(!result && progress == SASL_IDLE) { +#ifndef CURL_DISABLE_CRYPTO_AUTH + if(pop3c->authtypes & pop3c->preftype & POP3_TYPE_APOP) + /* Perform APOP authentication */ + result = pop3_perform_apop(conn); + else +#endif + if(pop3c->authtypes & pop3c->preftype & POP3_TYPE_CLEARTEXT) + /* Perform clear text authentication */ + result = pop3_perform_user(conn); + else { + /* Other mechanisms not supported */ + infof(conn->data, "No known authentication mechanisms supported!\n"); + result = CURLE_LOGIN_DENIED; + } + } + + return result; +} + +/*********************************************************************** + * + * pop3_perform_command() + * + * Sends a POP3 based command. + */ +static CURLcode pop3_perform_command(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct POP3 *pop3 = data->req.protop; + const char *command = NULL; + + /* Calculate the default command */ + if(pop3->id[0] == '\0' || conn->data->set.ftp_list_only) { + command = "LIST"; + + if(pop3->id[0] != '\0') + /* Message specific LIST so skip the BODY transfer */ + pop3->transfer = FTPTRANSFER_INFO; + } + else + command = "RETR"; + + /* Send the command */ + if(pop3->id[0] != '\0') + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s %s", + (pop3->custom && pop3->custom[0] != '\0' ? + pop3->custom : command), pop3->id); + else + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", + (pop3->custom && pop3->custom[0] != '\0' ? + pop3->custom : command)); + + if(!result) + state(conn, POP3_COMMAND); + + return result; +} + +/*********************************************************************** + * + * pop3_perform_quit() + * + * Performs the quit action prior to sclose() be called. + */ +static CURLcode pop3_perform_quit(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + /* Send the QUIT command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "QUIT"); + + if(!result) + state(conn, POP3_QUIT); + + return result; +} + +/* For the initial server greeting */ +static CURLcode pop3_state_servergreet_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct pop3_conn *pop3c = &conn->proto.pop3c; + const char *line = data->state.buffer; + size_t len = strlen(line); + size_t i; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Got unexpected pop3-server response"); + result = CURLE_FTP_WEIRD_SERVER_REPLY; + } + else { + /* Does the server support APOP authentication? */ + if(len >= 4 && line[len - 2] == '>') { + /* Look for the APOP timestamp */ + for(i = 3; i < len - 2; ++i) { + if(line[i] == '<') { + /* Calculate the length of the timestamp */ + size_t timestamplen = len - 1 - i; + if(!timestamplen) + break; + + /* Allocate some memory for the timestamp */ + pop3c->apoptimestamp = (char *)calloc(1, timestamplen + 1); + + if(!pop3c->apoptimestamp) + break; + + /* Copy the timestamp */ + memcpy(pop3c->apoptimestamp, line + i, timestamplen); + pop3c->apoptimestamp[timestamplen] = '\0'; + + /* Store the APOP capability */ + pop3c->authtypes |= POP3_TYPE_APOP; + break; + } + } + } + + result = pop3_perform_capa(conn); + } + + return result; +} + +/* For CAPA responses */ +static CURLcode pop3_state_capa_resp(struct connectdata *conn, int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct pop3_conn *pop3c = &conn->proto.pop3c; + const char *line = data->state.buffer; + size_t len = strlen(line); + size_t wordlen; + + (void)instate; /* no use for this yet */ + + /* Do we have a untagged response? */ + if(pop3code == '*') { + /* Does the server support the STLS capability? */ + if(len >= 4 && !memcmp(line, "STLS", 4)) + pop3c->tls_supported = TRUE; + + /* Does the server support clear text authentication? */ + else if(len >= 4 && !memcmp(line, "USER", 4)) + pop3c->authtypes |= POP3_TYPE_CLEARTEXT; + + /* Does the server support SASL based authentication? */ + else if(len >= 5 && !memcmp(line, "SASL ", 5)) { + pop3c->authtypes |= POP3_TYPE_SASL; + + /* Advance past the SASL keyword */ + line += 5; + len -= 5; + + /* Loop through the data line */ + for(;;) { + size_t llen; + unsigned int mechbit; + + while(len && + (*line == ' ' || *line == '\t' || + *line == '\r' || *line == '\n')) { + + line++; + len--; + } + + if(!len) + break; + + /* Extract the word */ + for(wordlen = 0; wordlen < len && line[wordlen] != ' ' && + line[wordlen] != '\t' && line[wordlen] != '\r' && + line[wordlen] != '\n';) + wordlen++; + + /* Test the word for a matching authentication mechanism */ + if((mechbit = Curl_sasl_decode_mech(line, wordlen, &llen)) && + llen == wordlen) + pop3c->sasl.authmechs |= mechbit; + + line += wordlen; + len -= wordlen; + } + } + } + else if(pop3code == '+') { + if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) { + /* We don't have a SSL/TLS connection yet, but SSL is requested */ + if(pop3c->tls_supported) + /* Switch to TLS connection now */ + result = pop3_perform_starttls(conn); + else if(data->set.use_ssl == CURLUSESSL_TRY) + /* Fallback and carry on with authentication */ + result = pop3_perform_authentication(conn); + else { + failf(data, "STLS not supported."); + result = CURLE_USE_SSL_FAILED; + } + } + else + result = pop3_perform_authentication(conn); + } + else { + /* Clear text is supported when CAPA isn't recognised */ + pop3c->authtypes |= POP3_TYPE_CLEARTEXT; + + result = pop3_perform_authentication(conn); + } + + return result; +} + +/* For STARTTLS responses */ +static CURLcode pop3_state_starttls_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + if(data->set.use_ssl != CURLUSESSL_TRY) { + failf(data, "STARTTLS denied. %c", pop3code); + result = CURLE_USE_SSL_FAILED; + } + else + result = pop3_perform_authentication(conn); + } + else + result = pop3_perform_upgrade_tls(conn); + + return result; +} + +/* For SASL authentication responses */ +static CURLcode pop3_state_auth_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct pop3_conn *pop3c = &conn->proto.pop3c; + saslprogress progress; + + (void)instate; /* no use for this yet */ + + result = Curl_sasl_continue(&pop3c->sasl, conn, pop3code, &progress); + if(!result) + switch(progress) { + case SASL_DONE: + state(conn, POP3_STOP); /* Authenticated */ + break; + case SASL_IDLE: /* No mechanism left after cancellation */ +#ifndef CURL_DISABLE_CRYPTO_AUTH + if(pop3c->authtypes & pop3c->preftype & POP3_TYPE_APOP) + /* Perform APOP authentication */ + result = pop3_perform_apop(conn); + else +#endif + if(pop3c->authtypes & pop3c->preftype & POP3_TYPE_CLEARTEXT) + /* Perform clear text authentication */ + result = pop3_perform_user(conn); + else { + failf(data, "Authentication cancelled"); + result = CURLE_LOGIN_DENIED; + } + break; + default: + break; + } + + return result; +} + +#ifndef CURL_DISABLE_CRYPTO_AUTH +/* For APOP responses */ +static CURLcode pop3_state_apop_resp(struct connectdata *conn, int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Authentication failed: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else + /* End of connect phase */ + state(conn, POP3_STOP); + + return result; +} +#endif + +/* For USER responses */ +static CURLcode pop3_state_user_resp(struct connectdata *conn, int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied. %c", pop3code); + result = CURLE_LOGIN_DENIED; + } + else + /* Send the PASS command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "PASS %s", + conn->passwd ? conn->passwd : ""); + if(!result) + state(conn, POP3_PASS); + + return result; +} + +/* For PASS responses */ +static CURLcode pop3_state_pass_resp(struct connectdata *conn, int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied. %c", pop3code); + result = CURLE_LOGIN_DENIED; + } + else + /* End of connect phase */ + state(conn, POP3_STOP); + + return result; +} + +/* For command responses */ +static CURLcode pop3_state_command_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct POP3 *pop3 = data->req.protop; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + state(conn, POP3_STOP); + return CURLE_RECV_ERROR; + } + + /* This 'OK' line ends with a CR LF pair which is the two first bytes of the + EOB string so count this is two matching bytes. This is necessary to make + the code detect the EOB if the only data than comes now is %2e CR LF like + when there is no body to return. */ + pop3c->eob = 2; + + /* But since this initial CR LF pair is not part of the actual body, we set + the strip counter here so that these bytes won't be delivered. */ + pop3c->strip = 2; + + if(pop3->transfer == FTPTRANSFER_BODY) { + /* POP3 download */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, NULL, -1, NULL); + + if(pp->cache) { + /* The header "cache" contains a bunch of data that is actually body + content so send it as such. Note that there may even be additional + "headers" after the body */ + + if(!data->set.opt_no_body) { + result = Curl_pop3_write(conn, pp->cache, pp->cache_size); + if(result) + return result; + } + + /* Free the cache */ + Curl_safefree(pp->cache); + + /* Reset the cache size */ + pp->cache_size = 0; + } + } + + /* End of DO phase */ + state(conn, POP3_STOP); + + return result; +} + +static CURLcode pop3_statemach_act(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + int pop3code; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + size_t nread = 0; + + /* Busy upgrading the connection; right now all I/O is SSL/TLS, not POP3 */ + if(pop3c->state == POP3_UPGRADETLS) + return pop3_perform_upgrade_tls(conn); + + /* Flush any data that needs to be sent */ + if(pp->sendleft) + return Curl_pp_flushsend(pp); + + do { + /* Read the response from the server */ + result = Curl_pp_readresp(sock, pp, &pop3code, &nread); + if(result) + return result; + + if(!pop3code) + break; + + /* We have now received a full POP3 server response */ + switch(pop3c->state) { + case POP3_SERVERGREET: + result = pop3_state_servergreet_resp(conn, pop3code, pop3c->state); + break; + + case POP3_CAPA: + result = pop3_state_capa_resp(conn, pop3code, pop3c->state); + break; + + case POP3_STARTTLS: + result = pop3_state_starttls_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH: + result = pop3_state_auth_resp(conn, pop3code, pop3c->state); + break; + +#ifndef CURL_DISABLE_CRYPTO_AUTH + case POP3_APOP: + result = pop3_state_apop_resp(conn, pop3code, pop3c->state); + break; +#endif + + case POP3_USER: + result = pop3_state_user_resp(conn, pop3code, pop3c->state); + break; + + case POP3_PASS: + result = pop3_state_pass_resp(conn, pop3code, pop3c->state); + break; + + case POP3_COMMAND: + result = pop3_state_command_resp(conn, pop3code, pop3c->state); + break; + + case POP3_QUIT: + /* fallthrough, just stop! */ + default: + /* internal error */ + state(conn, POP3_STOP); + break; + } + } while(!result && pop3c->state != POP3_STOP && Curl_pp_moredata(pp)); + + return result; +} + +/* Called repeatedly until done from multi.c */ +static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + if((conn->handler->flags & PROTOPT_SSL) && !pop3c->ssldone) { + result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &pop3c->ssldone); + if(result || !pop3c->ssldone) + return result; + } + + result = Curl_pp_statemach(&pop3c->pp, FALSE); + *done = (pop3c->state == POP3_STOP) ? TRUE : FALSE; + + return result; +} + +static CURLcode pop3_block_statemach(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + while(pop3c->state != POP3_STOP && !result) + result = Curl_pp_statemach(&pop3c->pp, TRUE); + + return result; +} + +/* Allocate and initialize the POP3 struct for the current SessionHandle if + required */ +static CURLcode pop3_init(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct POP3 *pop3; + + pop3 = data->req.protop = calloc(sizeof(struct POP3), 1); + if(!pop3) + result = CURLE_OUT_OF_MEMORY; + + return result; +} + +/* For the POP3 "protocol connect" and "doing" phases only */ +static int pop3_getsock(struct connectdata *conn, curl_socket_t *socks, + int numsocks) +{ + return Curl_pp_getsock(&conn->proto.pop3c.pp, socks, numsocks); +} + +/*********************************************************************** + * + * pop3_connect() + * + * This function should do everything that is to be considered a part of the + * connection phase. + * + * The variable 'done' points to will be TRUE if the protocol-layer connect + * phase is done when this function returns, or FALSE if not. + */ +static CURLcode pop3_connect(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + + *done = FALSE; /* default to not done yet */ + + /* We always support persistent connections in POP3 */ + connkeep(conn, "POP3 default"); + + /* Set the default response time-out */ + pp->response_time = RESP_TIMEOUT; + pp->statemach_act = pop3_statemach_act; + pp->endofresp = pop3_endofresp; + pp->conn = conn; + + /* Set the default preferred authentication type and mechanism */ + pop3c->preftype = POP3_TYPE_ANY; + Curl_sasl_init(&pop3c->sasl, &saslpop3); + + /* Initialise the pingpong layer */ + Curl_pp_init(pp); + + /* Parse the URL options */ + result = pop3_parse_url_options(conn); + if(result) + return result; + + /* Start off waiting for the server greeting response */ + state(conn, POP3_SERVERGREET); + + result = pop3_multi_statemach(conn, done); + + return result; +} + +/*********************************************************************** + * + * pop3_done() + * + * The DONE function. This does what needs to be done after a single DO has + * performed. + * + * Input argument is already checked for validity. + */ +static CURLcode pop3_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct POP3 *pop3 = data->req.protop; + + (void)premature; + + if(!pop3) + /* When the easy handle is removed from the multi interface while libcurl + is still trying to resolve the host name, the POP3 struct is not yet + initialized. However, the removal action calls Curl_done() which in + turn calls this function, so we simply return success. */ + return CURLE_OK; + + if(status) { + connclose(conn, "POP3 done with bad status"); + result = status; /* use the already set error code */ + } + + /* Cleanup our per-request based variables */ + Curl_safefree(pop3->id); + Curl_safefree(pop3->custom); + + /* Clear the transfer mode for the next request */ + pop3->transfer = FTPTRANSFER_BODY; + + return result; +} + +/*********************************************************************** + * + * pop3_perform() + * + * This is the actual DO function for POP3. Get a message/listing according to + * the options previously setup. + */ +static CURLcode pop3_perform(struct connectdata *conn, bool *connected, + bool *dophase_done) +{ + /* This is POP3 and no proxy */ + CURLcode result = CURLE_OK; + struct POP3 *pop3 = conn->data->req.protop; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + if(conn->data->set.opt_no_body) { + /* Requested no body means no transfer */ + pop3->transfer = FTPTRANSFER_INFO; + } + + *dophase_done = FALSE; /* not done yet */ + + /* Start the first command in the DO phase */ + result = pop3_perform_command(conn); + if(result) + return result; + + /* Run the state-machine */ + result = pop3_multi_statemach(conn, dophase_done); + + *connected = conn->bits.tcpconnect[FIRSTSOCKET]; + + if(*dophase_done) + DEBUGF(infof(conn->data, "DO phase is complete\n")); + + return result; +} + +/*********************************************************************** + * + * pop3_do() + * + * This function is registered as 'curl_do' function. It decodes the path + * parts etc as a wrapper to the actual DO function (pop3_perform). + * + * The input argument is already checked for validity. + */ +static CURLcode pop3_do(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + + *done = FALSE; /* default to false */ + + /* Parse the URL path */ + result = pop3_parse_url_path(conn); + if(result) + return result; + + /* Parse the custom request */ + result = pop3_parse_custom_request(conn); + if(result) + return result; + + result = pop3_regular_transfer(conn, done); + + return result; +} + +/*********************************************************************** + * + * pop3_disconnect() + * + * Disconnect from an POP3 server. Cleanup protocol-specific per-connection + * resources. BLOCKING. + */ +static CURLcode pop3_disconnect(struct connectdata *conn, bool dead_connection) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + + /* We cannot send quit unconditionally. If this connection is stale or + bad in any way, sending quit and waiting around here will make the + disconnect wait in vain and cause more problems than we need to. */ + + /* The POP3 session may or may not have been allocated/setup at this + point! */ + if(!dead_connection && pop3c->pp.conn && pop3c->pp.conn->bits.protoconnstart) + if(!pop3_perform_quit(conn)) + (void)pop3_block_statemach(conn); /* ignore errors on QUIT */ + + /* Disconnect from the server */ + Curl_pp_disconnect(&pop3c->pp); + + /* Cleanup the SASL module */ + Curl_sasl_cleanup(conn, pop3c->sasl.authused); + + /* Cleanup our connection based variables */ + Curl_safefree(pop3c->apoptimestamp); + + return CURLE_OK; +} + +/* Call this when the DO phase has completed */ +static CURLcode pop3_dophase_done(struct connectdata *conn, bool connected) +{ + (void)conn; + (void)connected; + + return CURLE_OK; +} + +/* Called from multi.c while DOing */ +static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done) +{ + CURLcode result = pop3_multi_statemach(conn, dophase_done); + + if(result) + DEBUGF(infof(conn->data, "DO phase failed\n")); + else if(*dophase_done) { + result = pop3_dophase_done(conn, FALSE /* not connected */); + + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + + return result; +} + +/*********************************************************************** + * + * pop3_regular_transfer() + * + * The input argument is already checked for validity. + * + * Performs all commands done before a regular transfer between a local and a + * remote host. + */ +static CURLcode pop3_regular_transfer(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result = CURLE_OK; + bool connected = FALSE; + struct SessionHandle *data = conn->data; + + /* Make sure size is unknown at this point */ + data->req.size = -1; + + /* Set the progress data */ + Curl_pgrsSetUploadCounter(data, 0); + Curl_pgrsSetDownloadCounter(data, 0); + Curl_pgrsSetUploadSize(data, -1); + Curl_pgrsSetDownloadSize(data, -1); + + /* Carry out the perform */ + result = pop3_perform(conn, &connected, dophase_done); + + /* Perform post DO phase operations if necessary */ + if(!result && *dophase_done) + result = pop3_dophase_done(conn, connected); + + return result; +} + +static CURLcode pop3_setup_connection(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + + /* Initialise the POP3 layer */ + CURLcode result = pop3_init(conn); + if(result) + return result; + + if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) { + /* Unless we have asked to tunnel POP3 operations through the proxy, we + switch and use HTTP operations only */ +#ifndef CURL_DISABLE_HTTP + if(conn->handler == &Curl_handler_pop3) + conn->handler = &Curl_handler_pop3_proxy; + else { +#ifdef USE_SSL + conn->handler = &Curl_handler_pop3s_proxy; +#else + failf(data, "POP3S not supported!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + + /* set it up as an HTTP connection instead */ + return conn->handler->setup_connection(conn); +#else + failf(data, "POP3 over http proxy requires HTTP support built-in!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + + data->state.path++; /* don't include the initial slash */ + + return CURLE_OK; +} + +/*********************************************************************** + * + * pop3_parse_url_options() + * + * Parse the URL login options. + */ +static CURLcode pop3_parse_url_options(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + const char *ptr = conn->options; + + pop3c->sasl.resetprefs = TRUE; + + while(!result && ptr && *ptr) { + const char *key = ptr; + const char *value; + + while(*ptr && *ptr != '=') + ptr++; + + value = ptr + 1; + + while(*ptr && *ptr != ';') + ptr++; + + if(strnequal(key, "AUTH=", 5)) { + result = Curl_sasl_parse_url_auth_option(&pop3c->sasl, + value, ptr - value); + + if(result && strnequal(value, "+APOP", ptr - value)) { + pop3c->preftype = POP3_TYPE_APOP; + pop3c->sasl.prefmech = SASL_AUTH_NONE; + result = CURLE_OK; + } + } + else + result = CURLE_URL_MALFORMAT; + + if(*ptr == ';') + ptr++; + } + + if(pop3c->preftype != POP3_TYPE_APOP) + switch(pop3c->sasl.prefmech) { + case SASL_AUTH_NONE: + pop3c->preftype = POP3_TYPE_NONE; + break; + case SASL_AUTH_DEFAULT: + pop3c->preftype = POP3_TYPE_ANY; + break; + default: + pop3c->preftype = POP3_TYPE_SASL; + break; + } + + return result; +} + +/*********************************************************************** + * + * pop3_parse_url_path() + * + * Parse the URL path into separate path components. + */ +static CURLcode pop3_parse_url_path(struct connectdata *conn) +{ + /* The POP3 struct is already initialised in pop3_connect() */ + struct SessionHandle *data = conn->data; + struct POP3 *pop3 = data->req.protop; + const char *path = data->state.path; + + /* URL decode the path for the message ID */ + return Curl_urldecode(data, path, 0, &pop3->id, NULL, TRUE); +} + +/*********************************************************************** + * + * pop3_parse_custom_request() + * + * Parse the custom request. + */ +static CURLcode pop3_parse_custom_request(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct POP3 *pop3 = data->req.protop; + const char *custom = data->set.str[STRING_CUSTOMREQUEST]; + + /* URL decode the custom request */ + if(custom) + result = Curl_urldecode(data, custom, 0, &pop3->custom, NULL, TRUE); + + return result; +} + +/*********************************************************************** + * + * Curl_pop3_write() + * + * This function scans the body after the end-of-body and writes everything + * until the end is found. + */ +CURL_STATIC CURLcode Curl_pop3_write(struct connectdata *conn, char *str, size_t nread) +{ + /* This code could be made into a special function in the handler struct */ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct SingleRequest *k = &data->req; + + struct pop3_conn *pop3c = &conn->proto.pop3c; + bool strip_dot = FALSE; + size_t last = 0; + size_t i; + + /* Search through the buffer looking for the end-of-body marker which is + 5 bytes (0d 0a 2e 0d 0a). Note that a line starting with a dot matches + the eob so the server will have prefixed it with an extra dot which we + need to strip out. Additionally the marker could of course be spread out + over 5 different data chunks. */ + for(i = 0; i < nread; i++) { + size_t prev = pop3c->eob; + + switch(str[i]) { + case 0x0d: + if(pop3c->eob == 0) { + pop3c->eob++; + + if(i) { + /* Write out the body part that didn't match */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], + i - last); + + if(result) + return result; + + last = i; + } + } + else if(pop3c->eob == 3) + pop3c->eob++; + else + /* If the character match wasn't at position 0 or 3 then restart the + pattern matching */ + pop3c->eob = 1; + break; + + case 0x0a: + if(pop3c->eob == 1 || pop3c->eob == 4) + pop3c->eob++; + else + /* If the character match wasn't at position 1 or 4 then start the + search again */ + pop3c->eob = 0; + break; + + case 0x2e: + if(pop3c->eob == 2) + pop3c->eob++; + else if(pop3c->eob == 3) { + /* We have an extra dot after the CRLF which we need to strip off */ + strip_dot = TRUE; + pop3c->eob = 0; + } + else + /* If the character match wasn't at position 2 then start the search + again */ + pop3c->eob = 0; + break; + + default: + pop3c->eob = 0; + break; + } + + /* Did we have a partial match which has subsequently failed? */ + if(prev && prev >= pop3c->eob) { + /* Strip can only be non-zero for the very first mismatch after CRLF + and then both prev and strip are equal and nothing will be output + below */ + while(prev && pop3c->strip) { + prev--; + pop3c->strip--; + } + + if(prev) { + /* If the partial match was the CRLF and dot then only write the CRLF + as the server would have inserted the dot */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, (char*)POP3_EOB, + strip_dot ? prev - 1 : prev); + + if(result) + return result; + + last = i; + strip_dot = FALSE; + } + } + } + + if(pop3c->eob == POP3_EOB_LEN) { + /* We have a full match so the transfer is done, however we must transfer + the CRLF at the start of the EOB as this is considered to be part of the + message as per RFC-1939, sect. 3 */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, (char *)POP3_EOB, 2); + + k->keepon &= ~KEEP_RECV; + pop3c->eob = 0; + + return result; + } + + if(pop3c->eob) + /* While EOB is matching nothing should be output */ + return CURLE_OK; + + if(nread - last) { + result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], + nread - last); + } + + return result; +} + +#endif /* CURL_DISABLE_POP3 */ -- cgit v1.2.3