path: root/system/printer-laser/4/src/printer.kyocera.f-1010

PACKET kyocera f 1010 printer
 
(**************************************************************************)
(*                                                Stand   : 03.12.86      *)
(*  KYOCERA   F - 1010                            Verison : 4             *)
(*                                                Autor   : Rudolf Ruland *)
(**************************************************************************)

(**************************************************************************)
(*  Hinweis : Die 'time-out' Zeit, nach der der Eingabepuffer ausgegeben  *)
(*            wird, wenn keine Eingabe mehr erfolgt, sollte moeglichst    *)
(*            gross gewaehlt werden,                                      *)
(*            z.B.  mit   FRPO H9, 60;   wird sie auf 5 Min. gesetzt      *)
(**************************************************************************)

 
       DEFINES open,
               close,
               execute,
 
               paper size :
 
LET underline           =  1,
(*  bold                =  2,
    italics             =  4,
    reverse             =  8,
 
    underline linetype  =  1, *)
 
    c document          =  1,
    c page              =  2,
 
    c write text        =  1,
    c write cmd         =  2,
    c carriage return   =  3, 
    c move              =  4,
    c draw              =  5,
    c on                =  6, 
    c off               =  7,
    c type              =  8;
 
INT VAR blankpitch, high, low;
REAL VAR x size, y size;
BOOL VAR is landscape, is underline;

(*********************************************************************)
 
paper size (21.0, 29.7);
 
PROC paper size (REAL CONST x, y) :
 
  x size := x;
  y size := y;
 
END PROC paper size;
 
PROC paper size : 
 
  line;
  putline ("Papierbreite  =  " + text (x size, 5, 2) + " cm  =  " + text (x size / 2.54, 5, 2) + " Zoll");
  putline ("Papierlaenge  =  " + text (y size, 5, 2) + " cm  =  " + text (y size / 2.54, 5, 2) + " Zoll");
 
END PROC paper size;
 
(*********************************************************************)
 
PROC open (INT CONST op code, INT VAR param1, param2) :
 
SELECT op code OF
  CASE c document : open document 
  CASE c page     : open page
END SELECT; 
 
 
. x steps : param1
. y steps : param2
. 
  open document :
    out ("!"82"! RES; UNIT D; EXIT;");         (* Reset des Druckers *)
    IF pos (material, "landscape") > 0 OR pos (material, "quer") > 0
       THEN is landscape := TRUE;
            x steps      := x step conversion ( y size );
            y steps      := y step conversion ( x size );
            out (""27"&l1O");
       ELSE is landscape := FALSE;
            x steps      := x step conversion ( x size );
            y steps      := y step conversion ( y size );
    FI;
    is underline := FALSE;
    IF y size < 29.7 OR x size < 21.0
       THEN out ("!"82"! SLM ");
            IF is landscape
               THEN out (text (x step conversion (29.7 - y size)));
                    out ("; STM ");
                    out (text (y step conversion ((21.0 - x size) * 0.5)));
               ELSE out (text (x step conversion ((21.0 - x size) * 0.5)));
            FI;
            out ("; EXIT;");
     FI;

. x start : param1
. y start : param2
. 
  open page :
    out ("!"82"! MZP 0, 0; EXIT;");       (* Positionierung zum Nullpunkt *)
    IF is landscape
       THEN x start  := x step conversion (0.19);
            y start  := y step conversion (0.70);
       ELSE x start  := x step conversion (0.56);
            y start  := y step conversion (0.60);
    FI;
    IF   pos (material, "tray") > 0
         THEN out (""27"&l1H");
    ELIF pos (material, "manual") > 0
         THEN out (""27"&l2H");
    FI;
    out (""13"");
 
END PROC open; 
 
 
PROC close (INT CONST op code, INT CONST param1) :
 
SELECT op code OF
  CASE c document : close document 
  CASE c page     : close page
  OTHERWISE : put (param1)
END SELECT; 
 
. 
  close document :
 
 
(*. remaining y steps : param1*)
.
  close page :
    out (""12"");

END PROC close;
 
 
PROC execute (INT CONST op code, TEXT CONST string, INT CONST param1, param2) :
 
SELECT op code OF
  CASE c write text       :  write text
  CASE c write cmd        :  write cmd
  CASE c carriage return  :  carriage return
  CASE c move             :  move
  CASE c draw             :  draw
  CASE c on               :  on
  CASE c off              :  off
  CASE c type             :  type
END SELECT

 
. from : param1
. to   : param2
.
  write text :
    out subtext (string, from, to)
 
.
  write cmd :
    out subtext (string, from, to)
 
 
(*. x steps to left margin : param1*)
.
  carriage return :
    out (""13"")
 
 
. x steps : param1
. y steps : param2
.
  move :
    IF   x steps > 0
         THEN IF is underline
                 THEN underline x move
                 ELSE out (""27"*p+" + text (x steps) + "X");
              FI;
    ELIF x steps < 0
         THEN out (""27"*p"  + text (x steps) + "X");
    ELIF y steps > 0
         THEN out (""27"*p+" + text (y steps) + "Y");
    ELIF y steps < 0
         THEN out (""27"*p"  + text (y steps) + "Y");
    FI;

    . underline x move :
        high := x steps DIV blankpitch;
        low  := x steps MOD blankpitch;
        IF high > 0 THEN high TIMESOUT " " FI;
        IF low  > 0 THEN out (" "27"*p" + text (low - blank pitch) + "X") FI;
 
. 
  draw :
    stop
 
 
. modification : param1
.
  on :
    IF on string (modification) <> ""
       THEN out (on string (modification));
            IF modification = underline THEN is underline := TRUE FI;
       ELSE stop
    FI
 
.
  off :
    IF off string (modification) <> ""
       THEN out (off string (modification));
            IF modification = underline THEN is underline := FALSE FI;
       ELSE stop
    FI
 
 
. font nr : param1
.
  type :
    out (font string (font nr));
    blankpitch := char pitch (font nr, " ");
 
END PROC execute;
 
 
END PACKET kyocera f 1010 printer;
 
 
 
#page# 
(******************************************************************)
(***                                                            ***)
(***   Generierung des Printers                                 ***)
(***                                                            ***)
(******************************************************************)
 
LET printer name = "printer.kyocera.f-1010";
 
TEXT VAR fonttab name := "fonttab.kyocera.f-1010";
 
BOOL CONST multi user := (pcb (9) AND 255) <> 1;
 
INT VAR pr channel;
TEXT VAR buffer;
 
command dialogue (TRUE);
IF NOT multi user 
  THEN errorstop ("Dieser Treiber arbeitet nur mit Multi-Tasking-EUMEL") 
FI; 
ask for print channel;
dynamic font hint;
load font table;
forget (printer name, quiet);
IF multi user THEN generate printer spool FI;
check on;
command dialogue (TRUE);
.
  ask for print channel : 
    line;
    put ("gib Druckerkanal:");
    get (pr channel);
    do ("serverchannel(" + text (pr channel) + ")" ) ;
    line;
.
  dynamic font hint :
    line (3);
    putline (""4"Hinweis zur Benutzung der dynamischen Schrifttypen:");
    line;
    putline ("    In der Fonttabelle """ + fonttab name + """ sind einige dynamische");
    putline ("    Schrifttypen angepaßt. Diese müssen nach jedem Einschalten des");
    putline ("    Druckers neu generiert werden.");
    putline ("    Zur Generierung dieser Schrifttypen befinden sich auf dem Standard-");
    putline ("    archive die folgenden Dateien:");
    line;
    putline ("               ""genfont.kyocera.f-1010.dynamic1""");
    putline ("               ""genfont.kyocera.f-1010.dynamic2""");
    line;
    putline ("    Nach Einschalten des Druckers müssen diese Dateien zuerst ausgedruckt");
    putline ("    werden.");
    putline ("    Die Generierung benötigt pro Schriftart etwa 15 Minuten.");
    line (2);
    putline ("Weiter nach Eingabe einer Taste");
    pause;
.
  load font table :
    IF NOT exists (fonttab name)
       THEN REP line (2); 
                putline ("Bitte Archiv mit der Fonttabelle """ +
                          fonttab name + """ einlegen!");
                line;
            UNTIL yes ("Archiv eingelegt") PER;
            reserve archive;
            fetch (fonttab name, archive);
            release (archive);
    FI;
    font table (fonttab name);
    IF multi user
       THEN command dialogue (FALSE);
            do ("save(""" + font tab name + """,task(""configurator""))")
    FI;
    forget (fonttab name, quiet);
 
    . reserve archive :
        INT VAR p1, p2;
        archive (" "31" ");
        disable stop;
        list (archive);
        IF is error
           THEN buffer := errormessage;
                p1 := pos (buffer, """", 1 ) + 1;
                p2 := pos (buffer, """", p1) - 1;
                IF p1 > 0 AND p2 > 0
                   THEN clear error;
                        buffer := subtext (buffer, p1, p2);
                        archive (buffer);
                FI;
        FI;
        enable stop;
 
. generate printer spool :
    eumel must advertise;
    cursor (1, 12);
    putline ("In allen bestehenden Tasks - insbesondere in der Task ""PUBLIC"" - muß");
    putline ("die Fonttabelle mit dem Kommando");
    line;
    putline ("      font table (""" + font tab name + """)");
    line;
    putline ("eingestellt werden!!!");
    line (4);
    putline ("Generierung beendet, weiter mit 'SV'");
    generate printer server;
    do (buffer);
 
. generate printer server :
    buffer :=  "break (quiet);";
    buffer CAT "spool manager (PROC printer);";
    buffer CAT "INT VAR reply; DATASPACE VAR ds; FILE VAR file;";
    buffer CAT "PROC printer:";
    buffer CAT "  disable stop;";
    buffer CAT "  continue (server channel);";
    buffer CAT "  check error (error message);";
    buffer CAT "  ds := nilspace;";
    buffer CAT "  REP forget (ds);";
    buffer CAT "      execute print;";
    buffer CAT "      IF is error AND online";
    buffer CAT "         THEN out (""""27""(8U""27""(s0p10h12v0s0b3T"");";
    buffer CAT "              put error; clear error; out (""""12"""");";
    buffer CAT "      FI;";
    buffer CAT "  PER;";
    buffer CAT "END PROC printer;";
    buffer CAT "PROC execute print:";
    buffer CAT "  LET ack = 0, fetch code = 11, file type = 1003;";
    buffer CAT "  enable stop;";
    buffer CAT "  ds := nilspace;";
    buffer CAT "  call (father, fetch code, ds, reply);";
    buffer CAT "  IF reply = ack CAND type (ds) = file type";
    buffer CAT "     THEN file := sequential file (input, ds);";
    buffer CAT "          print (file,";
    buffer CAT "            PROC (INT CONST, INT VAR, INT VAR) open,";
    buffer CAT "            PROC (INT CONST, INT CONST) close,";
    buffer CAT "            PROC (INT CONST, TEXT CONST, INT CONST, INT CONST) execute);";
    buffer CAT "  FI;";
    buffer CAT "END PROC execute print;";
    buffer CAT "PROC check error(TEXT CONST message):";
    buffer CAT "  IF is error";
    buffer CAT "     THEN clear error; rename myself (message);";
    buffer CAT "          IF is error THEN end(myself) FI;";
    buffer CAT "          pause (9000); end(myself);";
    buffer CAT "  FI;";
    buffer CAT "END PROC check error;";