Fix interrupt stuff

Sorta polling based now, with interrupts used to wake up from sleep only. At
least it works.

4 files changed, 20 insertions, 22 deletions

diff --git a/accel.c b/accel.c
index b58f7f7..ede53ff 100644
--- a/accel.c
+++ b/accel.c
@@ -5,6 +5,7 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/sleep.h>
+#include <util/atomic.h>
 
 #include "i2c.h"
 #include "accel.h"
@@ -16,8 +17,6 @@
 #define LIS302DL_CTRLREG1 0x20
 #define LIS302DL_UNUSED1 0x28
 
-/* the first interrupt is lost */
-static volatile bool drdy = true;
 /* 0, 2 and 4 are zero, as they contain the dummy register’s content */
 static volatile int8_t val[6] = {0, 0, 0, 0, 0, 0};
 /* currently reading from i2c */
@@ -26,13 +25,13 @@ static bool reading = false;
 /* data ready interrupt
  */
 ISR(PCINT1_vect) {
-	drdy = true;
+	/* empty */
 }
 
 void accelInit () {
 	/* set interrupt lines to input with pull-up */
-	DDRC = DDRC & ~((1 << PC0) | (1 << PC1));
-	PORTC = PORTC | (1 << PC0) | (1 << PC1);
+	DDRC = DDRC & ~((1 << DDC0) | (1 << DDC1));
+	PORTC = PORTC | (1 << PORTC0) | (1 << PORTC1);
 	/* enable interrupt PCI1 for PCINT8/9 */
 	PCICR = PCICR | (1 << PCIE1);
 	/* enable interrupts from port PC0/PC1 aka PCINT8/PCINT9 */
@@ -67,13 +66,13 @@ bool accelProcess () {
 			reading = false;
 		}
 	} else {
-		if (drdy && twr.status != TWST_WAIT) {
+		if (!((PINC >> PINC1) & 0x1) && twr.status != TWST_WAIT) {
 			/* new data available in device buffer and bus is free, we are
 			 * reading the registers inbetween out_x/y/z and ignore them */
-			if (!twRequest (TWM_READ, LIS302DL, LIS302DL_UNUSED1, (uint8_t *) val, 6)) {
+			if (!twRequest (TWM_READ, LIS302DL, LIS302DL_UNUSED1,
+					(uint8_t *) val, 6)) {
 				printf ("cannot start read\n");
 			} else {
-				drdy = false;
 				reading = true;
 			}
 		}
diff --git a/gyro.c b/gyro.c
index eede345..406ae2e 100644
--- a/gyro.c
+++ b/gyro.c
@@ -29,8 +29,7 @@
 #define L3GD20_CTRLREG3 0x22
 #define L3GD20_CTRLREG4 0x23
 
-/* the first interrupt is lost */
-static volatile bool drdy = true;
+/* raw values */
 static volatile int16_t val[3] = {0, 0, 0};
 /* current (relative) angle, in millidegree */
 static int16_t angle[3] = {0, 0, 0};
@@ -40,13 +39,13 @@ static bool reading = false;
 /* data ready interrupt
  */
 ISR(PCINT0_vect) {
-	drdy = true;
+	/* empty */
 }
 
 void gyroInit () {
 	/* set PB1 to input, with pull-up */
-	DDRB = (DDRB & ~((1 << PB1)));
-	PORTB = (PORTB | (1 << PB1));
+	DDRB = DDRB & ~((1 << DDB1));
+	PORTB = PORTB | (1 << PORTB1);
 	/* enable interrupt PCI0 */
 	PCICR = PCICR | (1 << PCIE0);
 	/* enable interrupts on PB1/PCINT1 */
@@ -58,10 +57,10 @@ void gyroStart () {
 	/* configuration:
 	 * disable power-down-mode
 	 * defaults
-	 * enable drdy interrupt
+	 * low-active (does not work?), push-pull, drdy on int2
 	 * select 500dps
 	 */
-	uint8_t data[] = {0b00001111, 0b0, 0b00001000, 0b00010000};
+	uint8_t data[] = {0b00001111, 0b0, 0b00101000, 0b00010000};
 
 	if (!twRequest (TWM_WRITE, L3GD20, L3GD20_CTRLREG1, data,
 			sizeof (data)/sizeof (*data))) {
@@ -87,12 +86,11 @@ bool gyroProcess () {
 			reading = false;
 		}
 	} else {
-		if (drdy && twr.status != TWST_WAIT) {
+		if (((PINB >> PINB1) & 0x1) && twr.status != TWST_WAIT) {
 			/* new data available in device buffer and bus is free */
 			if (!twRequest (TWM_READ, L3GD20, 0x28, (uint8_t *) val, 6)) {
 				printf ("cannot start read\n");
 			} else {
-				drdy = false;
 				reading = true;
 			}
 		}
diff --git a/i2c.c b/i2c.c
index 7855e88..3e4bffb 100644
--- a/i2c.c
+++ b/i2c.c
@@ -1,6 +1,8 @@
 #include <stdio.h>
 #include <util/twi.h>
 #include <avr/interrupt.h>
+#include <stdlib.h>
+#include <assert.h>
 
 #include "i2c.h"
 #include "common.h"
@@ -67,10 +69,7 @@ void twInit () {
  */
 bool twRequest (const twMode mode, const uint8_t address,
 		const uint8_t subaddress, uint8_t * const data, const uint8_t count) {
-	/* do not start if request is pending */
-	if (twr.status == TWST_WAIT) {
-		return false;
-	}
+	assert (twr.status != TWST_WAIT);
 
 	twr.mode = mode;
 	twr.address = address;
diff --git a/main.c b/main.c
index 9c35e99..4eb461e 100644
--- a/main.c
+++ b/main.c
@@ -66,7 +66,7 @@ int main () {
 				gyroProcess ();
 				accelProcess();
 			} else {
-				accelProcess();
+				accelProcess ();
 				gyroProcess ();
 			}
 			checkGyro = !checkGyro;
@@ -82,6 +82,8 @@ int main () {
 	}
 	timerStop ();
 
+	printf ("stopped\n");
+
 	/* global interrupt disable */
 	cli ();