shell regular expression mapping

11 files changed, 3761 insertions, 1861 deletions

diff --git a/ChangeLog b/ChangeLog
index 24dce90..d08df9f 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,14 @@
 2002-09-14  Andreas Buesching  <crunchy@tzi.de>
 
+	* mpiosh/callback.c (mpiosh_callback_mget, mpiosh_callback_mput) 
+	(mpiosh_callback_mdel): calling new function mpiosh_command_regex_fix
+
 	* mpiosh/mpiosh.c: fixed output of none interactive mode
 	(mpiosh_signal_handler, mpiosh_readline_cancel) 
 	(mpiosh_noredisplay): functions added to get a expected handling
 	of C-c (SIGINT)
+	(mpiosh_command_regex_fix): add function. tries to map regular
+	expressions to shell expressions. mapping '*' -> ".*" and '.' -> "\."
 
 2002-09-13  Markus Germeier  <mager@tzi.de>
 
diff --git a/Makefile.in b/Makefile.in
index 47a084b..5374adc 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -82,10 +82,10 @@ VERSION = @VERSION@
 SUBDIRS = kernel libmpio mpiosh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES = 
+CONFIG_CLEAN_FILES =  mpio.spec
 DIST_COMMON =  README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
 Makefile.in NEWS TODO aclocal.m4 config.guess config.sub configure \
-configure.in install-sh ltmain.sh missing mkinstalldirs
+configure.in install-sh ltmain.sh missing mkinstalldirs mpio.spec.in
 
 
 DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
@@ -108,6 +108,8 @@ config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
+mpio.spec: $(top_builddir)/config.status mpio.spec.in
+	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
diff --git a/aclocal.m4 b/aclocal.m4
index d5ac365..32c8dbd 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -105,6 +105,7 @@ AC_SUBST($1)])
 # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
 
 # serial 46 AC_PROG_LIBTOOL
+
 AC_DEFUN([AC_PROG_LIBTOOL],
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -230,9 +231,30 @@ _LT_AC_LTCONFIG_HACK
 
 ])
 
+# AC_LIBTOOL_HEADER_ASSERT
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
+[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
+    [lt_cv_func_assert_works],
+    [case $host in
+    *-*-solaris*)
+      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
+        case `$CC --version 2>/dev/null` in
+        [[12]].*) lt_cv_func_assert_works=no ;;
+        *)        lt_cv_func_assert_works=yes ;;
+        esac
+      fi
+      ;;
+    esac])
+
+if test "x$lt_cv_func_assert_works" = xyes; then
+  AC_CHECK_HEADERS(assert.h)
+fi
+])# AC_LIBTOOL_HEADER_ASSERT
+
 # _LT_AC_CHECK_DLFCN
 # --------------------
-AC_DEFUN(_LT_AC_CHECK_DLFCN,
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
 [AC_CHECK_HEADERS(dlfcn.h)
 ])# _LT_AC_CHECK_DLFCN
 
@@ -250,10 +272,10 @@ AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
 # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
 # Character class describing NM global symbol codes.
-[symcode='[BCDEGRST]']
+symcode='[[BCDEGRST]]'
 
 # Regexp to match symbols that can be accessed directly from C.
-[sympat='\([_A-Za-z][_A-Za-z0-9]*\)']
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
 # Transform the above into a raw symbol and a C symbol.
 symxfrm='\1 \2\3 \3'
@@ -261,25 +283,29 @@ symxfrm='\1 \2\3 \3'
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
 
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
 # Define system-specific variables.
 case $host_os in
 aix*)
-  [symcode='[BCDT]']
+  symcode='[[BCDT]]'
   ;;
 cygwin* | mingw* | pw32*)
-  [symcode='[ABCDGISTW]']
+  symcode='[[ABCDGISTW]]'
   ;;
 hpux*) # Its linker distinguishes data from code symbols
   lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
 irix*)
-  [symcode='[BCDEGRST]']
+  symcode='[[BCDEGRST]]'
   ;;
 solaris* | sysv5*)
-  [symcode='[BDT]']
+  symcode='[[BDT]]'
   ;;
 sysv4)
-  [symcode='[DFNSTU]']
+  symcode='[[DFNSTU]]'
   ;;
 esac
 
@@ -293,14 +319,14 @@ esac
 
 # If we're using GNU nm, then use its standard symbol codes.
 if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  [symcode='[ABCDGISTW]']
+  symcode='[[ABCDGISTW]]'
 fi
 
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
   # Write the raw and C identifiers.
-[lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"]
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -342,23 +368,23 @@ EOF
 
 	  cat <<EOF >> conftest.$ac_ext
 #if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
+# define lt_ptr void *
 #else
-# define lt_ptr_t char *
+# define lt_ptr char *
 # define const
 #endif
 
 /* The mapping between symbol names and symbols. */
 const struct {
   const char *name;
-  lt_ptr_t address;
+  lt_ptr address;
 }
-[lt_preloaded_symbols[] =]
+lt_preloaded_symbols[[]] =
 {
 EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
+	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
 	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
+  {0, (lt_ptr) 0}
 };
 
 #ifdef __cplusplus
@@ -402,10 +428,13 @@ done
 global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
 if test -z "$lt_cv_sys_global_symbol_pipe"; then
   global_symbol_to_cdecl=
+  global_symbol_to_c_name_address=
 else
   global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
 fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
   AC_MSG_RESULT(failed)
 else
   AC_MSG_RESULT(ok)
@@ -423,16 +452,17 @@ if test "X${PATH_SEPARATOR+set}" != Xset; then
     *-DOS) lt_cv_sys_path_separator=';' ;;
     *)     lt_cv_sys_path_separator=':' ;;
   esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
 fi
 ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
 
 # _LT_AC_PROG_ECHO_BACKSLASH
 # --------------------------
 # Add some code to the start of the generated configure script which
-# will find an echo command which doesn;t interpret backslashes.
+# will find an echo command which doesn't interpret backslashes.
 AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
 [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-                              [AC_DIVERT_PUSH(NOTICE)])
+			      [AC_DIVERT_PUSH(NOTICE)])
 _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
 
 # Check that we are running under the correct shell.
@@ -498,7 +528,7 @@ else
   #
   # So, first we look for a working echo in the user's PATH.
 
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for dir in $PATH /usr/ucb; do
     if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
@@ -587,7 +617,7 @@ AC_DIVERT_POP
 # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
 #                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
 # ------------------------------------------------------------------
-AC_DEFUN(_LT_AC_TRY_DLOPEN_SELF,
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
 [if test "$cross_compiling" = yes; then :
   [$4]
 else
@@ -674,7 +704,7 @@ rm -fr conftest*
 
 # AC_LIBTOOL_DLOPEN_SELF
 # -------------------
-AC_DEFUN(AC_LIBTOOL_DLOPEN_SELF,
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
 [if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -696,16 +726,22 @@ else
    ;;
 
   *)
-    AC_CHECK_LIB(dl, dlopen,  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-      [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen",
-        [AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load",
-          [AC_CHECK_LIB(svld, dlopen,
-	    [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-            [AC_CHECK_LIB(dld, shl_load,
-              [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+    AC_CHECK_FUNC([shl_load],
+          [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
 	    ])
-          ])
-        ])
+	  ])
+	])
       ])
     ;;
   esac
@@ -768,10 +804,10 @@ AC_DEFUN([_LT_AC_LTCONFIG_HACK],
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
 Xsed='sed -e s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
@@ -840,8 +876,15 @@ old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
 fi
 
 # Allow CC to be a program name with arguments.
@@ -861,7 +904,7 @@ rmdir .libs 2>/dev/null
 AC_MSG_RESULT($objdir)
 
 
-AC_ARG_WITH(pic, 
+AC_ARG_WITH(pic,
 [  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
 pic_mode="$withval", pic_mode=default)
 test -z "$pic_mode" && pic_mode=default
@@ -889,7 +932,7 @@ AC_CACHE_VAL(lt_cv_prog_cc_pic,
       # libC (AIX C++ library), which obviously doesn't included in libraries
       # list by gcc. This cause undefined symbols with -static flags.
       # This hack allows C programs to be linked with "-static -ldl", but
-      # we not sure about C++ programs.
+      # not sure about C++ programs.
       lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
       ;;
     amigaos*)
@@ -924,13 +967,13 @@ AC_CACHE_VAL(lt_cv_prog_cc_pic,
     # PORTME Check for PIC flags for the system compiler.
     case $host_os in
     aix3* | aix4* | aix5*)
+      lt_cv_prog_cc_wl='-Wl,'
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        lt_cv_prog_cc_static='-Bstatic'
-        lt_cv_prog_cc_wl='-Wl,'
+	# AIX 5 now supports IA64 processor
+	lt_cv_prog_cc_static='-Bstatic'
       else
-        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
 
@@ -986,9 +1029,9 @@ AC_CACHE_VAL(lt_cv_prog_cc_pic,
       lt_cv_prog_cc_pic='-KPIC'
       lt_cv_prog_cc_static='-Bstatic'
       if test "x$host_vendor" = xsni; then
-        lt_cv_prog_cc_wl='-LD'
+	lt_cv_prog_cc_wl='-LD'
       else
-        lt_cv_prog_cc_wl='-Wl,'
+	lt_cv_prog_cc_wl='-Wl,'
       fi
       ;;
 
@@ -1055,7 +1098,7 @@ fi
 # Check for any special shared library compilation flags.
 if test -n "$lt_cv_prog_cc_shlib"; then
   AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | [egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]"] >/dev/null; then :
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
   else
    AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
     lt_cv_prog_cc_can_build_shared=no
@@ -1131,6 +1174,8 @@ if test x"$compiler_c_o" = x"yes"; then
   lt_cv_compiler_o_lo=no
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -c -o conftest.lo"
+  save_objext="$ac_objext"
+  ac_objext=lo
   AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
     # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
@@ -1140,6 +1185,7 @@ if test x"$compiler_c_o" = x"yes"; then
       lt_cv_compiler_o_lo=yes
     fi
   ])
+  ac_objext="$save_objext"
   CFLAGS="$save_CFLAGS"
   ])
   compiler_o_lo=$lt_cv_compiler_o_lo
@@ -1236,7 +1282,7 @@ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
 extract_expsyms_cmds=
 
 case $host_os in
-cygwin* | mingw* | pw32* )
+cygwin* | mingw* | pw32*)
   # FIXME: the MSVC++ port hasn't been tested in a loooong time
   # When not using gcc, we currently assume that we are using
   # Microsoft Visual C++.
@@ -1244,7 +1290,9 @@ cygwin* | mingw* | pw32* )
     with_gnu_ld=no
   fi
   ;;
-
+openbsd*)
+  with_gnu_ld=no
+  ;;
 esac
 
 ld_shlibs=yes
@@ -1331,7 +1379,7 @@ EOF
     # can override, but on older systems we have to supply one (in ltdll.c)
     if test "x$lt_cv_need_dllmain" = "xyes"; then
       ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
 	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
     else
       ltdll_obj=
@@ -1344,24 +1392,24 @@ EOF
     # Be careful not to strip the DATA tag left be newer dlltools.
     export_symbols_cmds="$ltdll_cmds"'
       $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols'
+      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
 
     # If the export-symbols file already is a .def file (1st line
     # is EXPORTS), use it as is.
     # If DATA tags from a recent dlltool are present, honour them!
     archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-        cp $export_symbols $output_objdir/$soname-def;
+	cp $export_symbols $output_objdir/$soname-def;
       else
-        echo EXPORTS > $output_objdir/$soname-def;
-        _lt_hint=1;
-        cat $export_symbols | while read symbol; do
-         set dummy \$symbol;
-         case \[$]# in
-           2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-           *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-         esac;
-         _lt_hint=`expr 1 + \$_lt_hint`;
-        done;
+	echo EXPORTS > $output_objdir/$soname-def;
+	_lt_hint=1;
+	cat $export_symbols | while read symbol; do
+	 set dummy \$symbol;
+	 case \[$]# in
+	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+	 esac;
+	 _lt_hint=`expr 1 + \$_lt_hint`;
+	done;
       fi~
       '"$ltdll_cmds"'
       $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
@@ -1456,80 +1504,96 @@ else
     ;;
 
   aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
     # When large executables or shared objects are built, AIX ld can
     # have problems creating the table of contents.  If linking a library
     # or program results in "error TOC overflow" add -mminimal-toc to
     # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
     # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
+    hardcode_direct=yes
     archive_cmds=''
     hardcode_libdir_separator=':'
     if test "$GCC" = yes; then
-      collect2name=`${CC} -print-prog-name=collect2`
-      if test -f "$collect2name" && \
-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-      then
-	# We have reworked collect2
-	hardcode_direct=yes
-      else
-        # We have old collect2
-        hardcode_direct=unsupported
-        # It fails to find uninstalled libraries when the uninstalled
-        # path is not listed in the libpath.  Setting hardcode_minus_L
-        # to unsupported forces relinking
-        hardcode_minus_L=yes
-        hardcode_libdir_flag_spec='-L$libdir'
-        hardcode_libdir_separator=
-      fi
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+	else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	fi
+      esac
+
       shared_flag='-shared'
     else
+      # not using gcc
       if test "$host_cpu" = ia64; then
-        shared_flag='-G'
+	shared_flag='${wl}-G'
       else
-        shared_flag='${wl}-bM:SRE'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
       fi
-      hardcode_direct=yes
     fi
 
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # Test if we are trying to use run time linking, or normal AIX style linking.
-      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
-      aix_use_runtimelinking=no
-      for ld_flag in $LDFLAGS; do
-        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
-          aix_use_runtimelinking=yes
-          break
-        fi
-      done
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
     # It seems that -bexpall can do strange things, so it is better to
     # generate a list of symbols to export.
     always_export_symbols=yes
     if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag='-berok'
       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      allow_undefined_flag=' -Wl,-G'
-      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
     else
       if test "$host_cpu" = ia64; then
-        hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-       allow_undefined_flag="-znodefs"
-        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag="-z nodefs"
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
       else
-        hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-        # Warning - without using the other run time loading flags, -berok will
-        #           link without error, but may produce a broken library.
-        allow_undefined_flag='${wl}-berok'
-        # This is a bit strange, but is similar to how AIX traditionally builds
-        # it's shared libraries.
-        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='${wl}-berok'
+	# This is a bit strange, but is similar to how AIX traditionally builds
+	# it's shared libraries.
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
       fi
     fi
     ;;
@@ -1561,11 +1625,18 @@ else
     ;;
 
   darwin* | rhapsody*)
-    allow_undefined_flag='-undefined suppress'
+    case "$host_os" in
+    rhapsody* | darwin1.[[012]])
+      allow_undefined_flag='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      allow_undefined_flag='-flat_namespace -undefined suppress'
+      ;;
+    esac
     # FIXME: Relying on posixy $() will cause problems for
     #        cross-compilation, but unfortunately the echo tests do not
     #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
+    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
     # We need to add '_' to the symbols in $export_symbols first
     #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
     hardcode_direct=yes
@@ -1640,7 +1711,7 @@ else
     ;;
 
   newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
     hardcode_direct=yes
     hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator=:
@@ -1648,10 +1719,24 @@ else
     ;;
 
   openbsd*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
     hardcode_direct=yes
     hardcode_shlibpath_var=no
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+    else
+      case "$host_os" in
+      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_libdir_flag_spec='-R$libdir'
+        ;;
+      *)
+        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        ;;
+      esac
+    fi
     ;;
 
   os2*)
@@ -1696,10 +1781,39 @@ else
     hardcode_shlibpath_var=no
     runpath_var=LD_RUN_PATH
     hardcode_runpath_var=yes
+    export_dynamic_flag_spec='${wl}-Bexport'
     ;;
 
   solaris*)
+    # gcc --version < 3.0 without binutils cannot create self contained
+    # shared libraries reliably, requiring libgcc.a to resolve some of
+    # the object symbols generated in some cases.  Libraries that use
+    # assert need libgcc.a to resolve __eprintf, for example.  Linking
+    # a copy of libgcc.a into every shared library to guarantee resolving
+    # such symbols causes other problems:  According to Tim Van Holder
+    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+    # (to the application) exception stack for one thing.
     no_undefined_flag=' -z defs'
+    if test "$GCC" = yes; then
+      case `$CC --version 2>/dev/null` in
+      [[12]].*)
+	cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries.  However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
+*** upgrade to a newer version of GCC.  Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+        no_undefined_flag=
+	;;
+      esac
+    fi
     # $CC -shared without GNU ld will not create a library from C++
     # object files and a static libstdc++, better avoid it by now
     archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
@@ -1708,7 +1822,7 @@ else
     hardcode_libdir_flag_spec='-R$libdir'
     hardcode_shlibpath_var=no
     case $host_os in
-    [solaris2.[0-5] | solaris2.[0-5].*]) ;;
+    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
     *) # Supported since Solaris 2.6 (maybe 2.5.1?)
       whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
     esac
@@ -1731,7 +1845,7 @@ else
 
   sysv4)
     if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
+      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes # is this really true???
     else
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
@@ -1888,22 +2002,24 @@ aix4* | aix5*)
     # depend on `.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
-      [ aix4 | aix4.[01] | aix4.[01].*)]
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-           echo ' yes '
-           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-        :
-      else
-        can_build_shared=no
-      fi
-      ;;
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	     echo ' yes '
+	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	  :
+	else
+	  can_build_shared=no
+	fi
+	;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
+    # AIX (on Power*) has no versioning support, so currently we can
+    # not hardcode correct soname into executable. Probably we can
+    # add versioning support to collect2, so additional links can
+    # be useful in future.
     if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
-      # lib<name>.a to let people know that these are not typical AIX shared libraries.
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
       library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
     else
       # We preserve .a as extension for shared libraries through AIX4.2
@@ -1912,14 +2028,13 @@ aix4* | aix5*)
       soname_spec='${libname}${release}.so$major'
     fi
     shlibpath_var=LIBPATH
-    deplibs_check_method=pass_all
   fi
   ;;
 
 amigaos*)
   library_names_spec='$libname.ixlibrary $libname.a'
   # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
   ;;
 
 beos*)
@@ -1950,7 +2065,7 @@ cygwin* | mingw* | pw32*)
   case $GCC,$host_os in
   yes,cygwin*)
     library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
+    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
     postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
@@ -1960,14 +2075,14 @@ cygwin* | mingw* | pw32*)
        $rm \$dlpath'
     ;;
   yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
     sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
     ;;
   yes,pw32*)
     library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
     ;;
   *)
-    library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib'
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
     ;;
   esac
   dynamic_linker='Win32 ld.exe'
@@ -2125,9 +2240,19 @@ newsos6)
 
 openbsd*)
   version_type=sunos
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-    need_version=no
+  need_lib_prefix=no
+  need_version=no
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case "$host_os" in
+    openbsd2.[[89]] | openbsd2.[[89]].*)
+      shlibpath_overrides_runpath=no
+      ;;
+    *)
+      shlibpath_overrides_runpath=yes
+      ;;
+    esac
+  else
+    shlibpath_overrides_runpath=yes
   fi
   library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
@@ -2238,6 +2363,33 @@ test "$dynamic_linker" = no && can_build_shared=no
 AC_MSG_CHECKING([if libtool supports shared libraries])
 AC_MSG_RESULT([$can_build_shared])
 
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
 if test "$hardcode_action" = relink; then
   # Fast installation is not supported
   enable_fast_install=no
@@ -2331,6 +2483,7 @@ if test -f "$ltmain"; then
     old_striplib striplib file_magic_cmd export_symbols_cmds \
     deplibs_check_method allow_undefined_flag no_undefined_flag \
     finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    global_symbol_to_c_name_address \
     hardcode_libdir_flag_spec hardcode_libdir_separator  \
     sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
     compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
@@ -2397,12 +2550,12 @@ SHELL=$lt_SHELL
 # Whether or not to build shared libraries.
 build_libtool_libs=$enable_shared
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
 # Whether or not to build static libraries.
 build_old_libs=$enable_static
 
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
@@ -2568,6 +2721,9 @@ global_symbol_pipe=$lt_global_symbol_pipe
 # Transform the output of nm in a proper C declaration
 global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
 
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
 # This is the shared library runtime path variable.
 runpath_var=$runpath_var
 
@@ -2690,9 +2846,9 @@ EOF
 #   return TRUE;
 # }
 # /* ltdll.c ends here */
-        # This is a source program that is used to create import libraries
-        # on Windows for dlls which lack them. Don't remove nor modify the
-        # starting and closing comments
+	# This is a source program that is used to create import libraries
+	# on Windows for dlls which lack them. Don't remove nor modify the
+	# starting and closing comments
 # /* impgen.c starts here */
 # /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
 #
@@ -3047,6 +3203,7 @@ test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -3060,8 +3217,8 @@ if test "$GCC" = yes; then
   esac
   case $ac_prog in
     # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      [re_direlt='/[^/][^/]*/\.\./']
+    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
@@ -3085,7 +3242,7 @@ else
 fi
 AC_CACHE_VAL(lt_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
@@ -3149,7 +3306,7 @@ lt_cv_deplibs_check_method='unknown'
 # `unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
-# ['file_magic [regex]'] -- check by looking for files in library path
+# 'file_magic [[regex]]' -- check by looking for files in library path
 # which responds to the $file_magic_cmd with a given egrep regex.
 # If you have `file' or equivalent on your system and you're not sure
 # whether `pass_all' will *always* work, you probably want this one.
@@ -3164,7 +3321,7 @@ beos*)
   ;;
 
 bsdi4*)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
@@ -3178,7 +3335,7 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   case "$host_os" in
-  rhapsody* | darwin1.[012])
+  rhapsody* | darwin1.[[012]])
     lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
     ;;
   *) # Darwin 1.3 on
@@ -3193,7 +3350,7 @@ freebsd*)
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -3208,7 +3365,7 @@ gnu*)
   ;;
 
 hpux10.20*|hpux11*)
-  [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
+  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
   lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libc.sl
   ;;
@@ -3227,7 +3384,7 @@ irix5* | irix6*)
     *) libmagic=never-match;;
     esac
     # this will be overridden with pass_all, but let us keep it just in case
-    [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
     ;;
   esac
   lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
@@ -3237,29 +3394,39 @@ irix5* | irix6*)
 # This must be Linux ELF.
 linux-gnu*)
   case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
+  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
     lt_cv_deplibs_check_method=pass_all ;;
   *)
     # glibc up to 2.1.1 does not perform some relocations on ARM
-    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;]
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
   esac
   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   ;;
 
 netbsd*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
   else
-    [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
   fi
   ;;
 
 newos6*)
-  [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
   lt_cv_file_magic_cmd=/usr/bin/file
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
 osf3* | osf4* | osf5*)
   # this will be overridden with pass_all, but let us keep it just in case
   lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
@@ -3276,14 +3443,14 @@ solaris*)
   lt_cv_file_magic_test_file=/lib/libc.so
   ;;
 
-[sysv5uw[78]* | sysv4*uw2*)]
+sysv5uw[[78]]* | sysv4*uw2*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   case $host_vendor in
   motorola)
-    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
     lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
     ;;
   ncr)
@@ -3291,11 +3458,11 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
     ;;
   sequent)
     lt_cv_file_magic_cmd='/bin/file'
-    [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )']
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
     ;;
   sni)
     lt_cv_file_magic_cmd='/bin/file'
-    [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"]
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
     lt_cv_file_magic_test_file=/lib/libc.so
     ;;
   esac
@@ -3309,13 +3476,14 @@ deplibs_check_method=$lt_cv_deplibs_check_method
 
 # AC_PROG_NM - find the path to a BSD-compatible name lister
 AC_DEFUN([AC_PROG_NM],
-[AC_MSG_CHECKING([for BSD-compatible nm])
+[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+AC_MSG_CHECKING([for BSD-compatible nm])
 AC_CACHE_VAL(lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
     tmp_nm=$ac_dir/${ac_tool_prefix}nm
diff --git a/configure b/configure
index cf3d84c..db99028 100755
--- a/configure
+++ b/configure
@@ -1,25 +1,12 @@
 #! /bin/sh
-
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+# Generated by Autoconf 2.52.
 #
+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-shared[=PKGS]  build shared libraries [default=yes]"
-ac_help="$ac_help
-  --enable-static[=PKGS]  build static libraries [default=yes]"
-ac_help="$ac_help
-  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
-ac_help="$ac_help
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
-
 # Find the correct PATH separator.  Usually this is `:', but
 # DJGPP uses `;' like DOS.
 if test "X${PATH_SEPARATOR+set}" != Xset; then
@@ -28,9 +15,9 @@ if test "X${PATH_SEPARATOR+set}" != Xset; then
     *-DOS) lt_cv_sys_path_separator=';' ;;
     *)     lt_cv_sys_path_separator=':' ;;
   esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
 fi
 
-
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
@@ -94,7 +81,7 @@ else
   #
   # So, first we look for a working echo in the user's PATH.
 
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for dir in $PATH /usr/ucb; do
     if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
        test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
@@ -176,21 +163,113 @@ if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
    ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+
+# Name of the executable.
+as_me=`echo "$0" |sed 's,.*[\\/],,'`
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+as_executable_p="test -f"
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+# NLS nuisances.
+$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
+$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
+$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
+$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
+$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
+$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
+$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
+$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+cross_compiling=no
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
 
-ac_help="$ac_help
-  --disable-libtool-lock  avoid locking (might break parallel builds)"
-ac_help="$ac_help
-  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
+ac_unique_file="kernel/mpio.c"
 
 # Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
 # The variables have the same names as the options, with
 # dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
+cache_file=/dev/null
 exec_prefix=NONE
-host=NONE
 no_create=
-nonopt=NONE
 no_recursion=
 prefix=NONE
 program_prefix=NONE
@@ -199,10 +278,15 @@ program_transform_name=s,x,x,
 silent=
 site=
 srcdir=
-target=NONE
 verbose=
 x_includes=NONE
 x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
@@ -216,17 +300,16 @@ oldincludedir='/usr/include'
 infodir='${prefix}/info'
 mandir='${prefix}/man'
 
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
 
 ac_prev=
 for ac_option
 do
-
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
     eval "$ac_prev=\$ac_option"
@@ -234,59 +317,59 @@ do
     continue
   fi
 
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case "$ac_option" in
+  case $ac_option in
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
   -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
+    bindir=$ac_optarg ;;
 
   -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
+    ac_prev=build_alias ;;
   -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
+    build_alias=$ac_optarg ;;
 
   -cache-file | --cache-file | --cache-fil | --cache-fi \
   | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
     ac_prev=cache_file ;;
   -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
   | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
 
   -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
     ac_prev=datadir ;;
   -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
   | --da=*)
-    datadir="$ac_optarg" ;;
+    datadir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
 
   -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
       *) ac_optarg=yes ;;
     esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
+    eval "enable_$ac_feature='$ac_optarg'" ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -295,95 +378,47 @@ do
   -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
   | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
   | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
+    exec_prefix=$ac_optarg ;;
 
   -gas | --gas | --ga | --g)
     # Obsolete; use --with-gas.
     with_gas=yes ;;
 
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
 
   -host | --host | --hos | --ho)
-    ac_prev=host ;;
+    ac_prev=host_alias ;;
   -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
+    host_alias=$ac_optarg ;;
 
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
   -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
   | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
+    includedir=$ac_optarg ;;
 
   -infodir | --infodir | --infodi | --infod | --info | --inf)
     ac_prev=infodir ;;
   -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
+    infodir=$ac_optarg ;;
 
   -libdir | --libdir | --libdi | --libd)
     ac_prev=libdir ;;
   -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
+    libdir=$ac_optarg ;;
 
   -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
   | --libexe | --libex | --libe)
     ac_prev=libexecdir ;;
   -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
   | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
+    libexecdir=$ac_optarg ;;
 
   -localstatedir | --localstatedir | --localstatedi | --localstated \
   | --localstate | --localstat | --localsta | --localst \
@@ -392,12 +427,12 @@ EOF
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
   | --localstate=* | --localstat=* | --localsta=* | --localst=* \
   | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
+    localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
     ac_prev=mandir ;;
   -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
+    mandir=$ac_optarg ;;
 
   -nfp | --nfp | --nf)
     # Obsolete; use --without-fp.
@@ -418,26 +453,26 @@ EOF
   -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
   | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
   | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
+    oldincludedir=$ac_optarg ;;
 
   -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
     ac_prev=prefix ;;
   -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
+    prefix=$ac_optarg ;;
 
   -program-prefix | --program-prefix | --program-prefi | --program-pref \
   | --program-pre | --program-pr | --program-p)
     ac_prev=program_prefix ;;
   -program-prefix=* | --program-prefix=* | --program-prefi=* \
   | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
+    program_prefix=$ac_optarg ;;
 
   -program-suffix | --program-suffix | --program-suffi | --program-suff \
   | --program-suf | --program-su | --program-s)
     ac_prev=program_suffix ;;
   -program-suffix=* | --program-suffix=* | --program-suffi=* \
   | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
+    program_suffix=$ac_optarg ;;
 
   -program-transform-name | --program-transform-name \
   | --program-transform-nam | --program-transform-na \
@@ -454,7 +489,7 @@ EOF
   | --program-transfo=* | --program-transf=* \
   | --program-trans=* | --program-tran=* \
   | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
+    program_transform_name=$ac_optarg ;;
 
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
@@ -464,7 +499,7 @@ EOF
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
   | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
+    sbindir=$ac_optarg ;;
 
   -sharedstatedir | --sharedstatedir | --sharedstatedi \
   | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
@@ -475,58 +510,57 @@ EOF
   | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
   | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
   | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
+    sharedstatedir=$ac_optarg ;;
 
   -site | --site | --sit)
     ac_prev=site ;;
   -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
+    site=$ac_optarg ;;
 
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
+    srcdir=$ac_optarg ;;
 
   -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
   | --syscon | --sysco | --sysc | --sys | --sy)
     ac_prev=sysconfdir ;;
   -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
   | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
+    sysconfdir=$ac_optarg ;;
 
   -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
+    ac_prev=target_alias ;;
   -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
+    target_alias=$ac_optarg ;;
 
   -v | -verbose | --verbose | --verbos | --verbo | --verb)
     verbose=yes ;;
 
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
     ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
       *) ac_optarg=yes ;;
     esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
+    eval "with_$ac_package='$ac_optarg'" ;;
 
   -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -537,98 +571,98 @@ EOF
     ac_prev=x_includes ;;
   -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
   | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
+    x_includes=$ac_optarg ;;
 
   -x-libraries | --x-libraries | --x-librarie | --x-librari \
   | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
     ac_prev=x_libraries ;;
   -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
+    x_libraries=$ac_optarg ;;
 
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
     ;;
 
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
   *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
   esac
 done
 
 if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
 fi
-exec 5>./config.log
 
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
 
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+              localstatedir libdir includedir oldincludedir infodir mandir
 do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
   esac
 done
 
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: should be removed in autoconf 3.0.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
 
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
 
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=kernel/mpio.c
+test "$silent" = yes && exec 6>/dev/null
 
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then its parent.
   ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
   test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
   srcdir=$ac_confdir
   if test ! -r $srcdir/$ac_unique_file; then
@@ -639,13 +673,319 @@ else
 fi
 if test ! -r $srcdir/$ac_unique_file; then
   if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+    { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
   else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+    { echo "$as_me: error: cannot find sources in $srcdir" >&2
+   { (exit 1); exit 1; }; }
   fi
 fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<EOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
 
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+EOF
+
+  cat <<EOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+EOF
+
+  cat <<\EOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+EOF
+fi
+
+if test -n "$ac_init_help"; then
+
+  cat <<\EOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-shared=PKGS  build shared libraries default=yes
+  --enable-static=PKGS  build static libraries default=yes
+  --enable-fast-install=PKGS  optimize for fast installation default=yes
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld default=no
+  --with-pic              try to use only PIC/non-PIC objects default=use both
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+EOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
+    cd $ac_subdir
+    # A "../" for each directory in /$ac_subdir.
+    ac_dots=`echo $ac_subdir |
+             sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
+
+    case $srcdir in
+    .) # No --srcdir option.  We are building in place.
+      ac_sub_srcdir=$srcdir ;;
+    [\\/]* | ?:[\\/]* ) # Absolute path.
+      ac_sub_srcdir=$srcdir/$ac_subdir ;;
+    *) # Relative path.
+      ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
+    esac
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_sub_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_sub_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_sub_srcdir/configure; then
+      echo
+      $SHELL $ac_sub_srcdir/configure  --help=recursive
+    elif test -f $ac_sub_srcdir/configure.ac ||
+           test -f $ac_sub_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
+    fi
+    cd $ac_popdir
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\EOF
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+EOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<EOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.52.  Invocation command line was
+
+  $ $0 $@
+
+EOF
+{
+cat <<_ASUNAME
+## ---------- ##
+## Platform.  ##
+## ---------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+PATH = $PATH
+
+_ASUNAME
+} >&5
+
+cat >&5 <<EOF
+## ------------ ##
+## Core tests.  ##
+## ------------ ##
+
+EOF
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell meta-characters.
+ac_configure_args=
+ac_sep=
+for ac_arg
+do
+  case $ac_arg in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+    ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+    ac_sep=" " ;;
+  *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
+     ac_sep=" " ;;
+  esac
+  # Get rid of the leading space.
+done
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  echo >&5
+  echo "## ----------------- ##" >&5
+  echo "## Cache variables.  ##" >&5
+  echo "## ----------------- ##" >&5
+  echo >&5
+  # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} >&5
+  sed "/^$/d" confdefs.h >conftest.log
+  if test -s conftest.log; then
+    echo >&5
+    echo "## ------------ ##" >&5
+    echo "## confdefs.h.  ##" >&5
+    echo "## ------------ ##" >&5
+    echo >&5
+    cat conftest.log >&5
+  fi
+  (echo; echo) >&5
+  test "$ac_signal" != 0 &&
+    echo "$as_me: caught signal $ac_signal" >&5
+  echo "$as_me: exit $exit_status" >&5
+  rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
 if test -z "$CONFIG_SITE"; then
   if test "x$prefix" != xNONE; then
@@ -656,41 +996,107 @@ if test -z "$CONFIG_SITE"; then
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
+    { echo "$as_me:999: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    cat "$ac_site_file" >&5
     . "$ac_site_file"
   fi
 done
 
 if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:1010: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
 else
-  echo "creating cache $cache_file"
-  > $cache_file
+  { echo "$as_me:1018: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:1034: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:1038: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+        { echo "$as_me:1044: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+        { echo "$as_me:1046:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+        { echo "$as_me:1048:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+        ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.  It doesn't matter if
+  # we pass some twice (in addition to the command line arguments).
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
+      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ;;
+    *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
+       ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:1067: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:1069: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
 ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)      ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+echo "#! $SHELL" >conftest.sh
+echo  "exit 0"   >>conftest.sh
+chmod +x conftest.sh
+if { (echo "$as_me:1089: PATH=\".;.\"; conftest.sh") >&5
+  (PATH=".;."; conftest.sh) 2>&5
+  ac_status=$?
+  echo "$as_me:1092: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  ac_path_separator=';'
 else
-  ac_n= ac_c='\c' ac_t=
+  ac_path_separator=:
 fi
-
-
+PATH_SEPARATOR="$ac_path_separator"
+rm -f conftest.sh
 
 ac_aux_dir=
 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
@@ -702,105 +1108,102 @@ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+  { { echo "$as_me:1118: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
 fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:1128: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:1132: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:1141: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:1145: error: $ac_config_sub $ac_cv_build_alias failed." >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:1150: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+echo "$as_me:1157: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:1166: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:1171: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+echo "$as_me:1178: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+  ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+  { { echo "$as_me:1187: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:1192: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 
 # The aliases save the names the user supplied, while $host etc.
 # will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:743: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:764: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:782: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
+test -n "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
-
-echo "$ac_t""Building for a ${host} host." 1>&6
+echo "$as_me:1205: result: Building for a ${host} host." >&5
+echo "${ECHO_T}Building for a ${host} host." >&6
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -809,31 +1212,39 @@ echo "$ac_t""Building for a ${host} host." 1>&6
 # SunOS /usr/etc/install
 # IRIX /sbin/install
 # AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:818: checking for a BSD compatible install" >&5
+echo "$as_me:1220: checking for a BSD compatible install" >&5
+echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
 if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    ac_save_IFS=$IFS; IFS=$ac_path_separator
   for ac_dir in $PATH; do
+    IFS=$ac_save_IFS
     # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    case $ac_dir/ in
+    / | ./ | .// | /cC/* \
+    | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
+    | /usr/ucb/* ) ;;
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
       # Don't use installbsd from OSF since it installs stuff as root
       # by default.
       for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
+        if $as_executable_p "$ac_dir/$ac_prog"; then
 	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+            grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -843,31 +1254,31 @@ else
       ;;
     esac
   done
-  IFS="$ac_save_IFS"
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
+    INSTALL=$ac_cv_path_install
   else
     # As a last resort, use the slow shell script.  We don't cache a
     # path for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
     # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
+    INSTALL=$ac_install_sh
   fi
 fi
-echo "$ac_t""$INSTALL" 1>&6
+echo "$as_me:1269: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:871: checking whether build environment is sane" >&5
+echo "$as_me:1280: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -889,8 +1300,11 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
+      { { echo "$as_me:1303: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
    fi
 
    test "$2" = conftestfile
@@ -899,379 +1313,752 @@ then
    # Ok.
    :
 else
-   { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
+   { { echo "$as_me:1316: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.  echo might interpret backslashes.
-  cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
+echo "$as_me:1323: result: yes" >&5
+echo "${ECHO_T}yes" >&6
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:928: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+echo "$as_me:1338: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\EOF
 all:
 	@echo 'ac_maketemp="${MAKE}"'
 EOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
 if test -n "$ac_maketemp"; then
   eval ac_cv_prog_make_${ac_make}_set=yes
 else
   eval ac_cv_prog_make_${ac_make}_set=no
 fi
-rm -f conftestmake
+rm -f conftest.make
 fi
 if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
+  echo "$as_me:1358: result: yes" >&5
+echo "${ECHO_T}yes" >&6
   SET_MAKE=
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:1362: result: no" >&5
+echo "${ECHO_T}no" >&6
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
-
 PACKAGE=mpio
 
-VERSION=0.0.1
+VERSION=0.5.0
 
 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+  { { echo "$as_me:1372: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
 fi
-cat >> confdefs.h <<EOF
+
+cat >>confdefs.h <<EOF
 #define PACKAGE "$PACKAGE"
 EOF
 
-cat >> confdefs.h <<EOF
+cat >>confdefs.h <<EOF
 #define VERSION "$VERSION"
 EOF
 
-
-
 missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:974: checking for working aclocal" >&5
+echo "$as_me:1386: checking for working aclocal" >&5
+echo $ECHO_N "checking for working aclocal... $ECHO_C" >&6
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
 if (aclocal --version) < /dev/null > /dev/null 2>&1; then
    ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
+   echo "$as_me:1393: result: found" >&5
+echo "${ECHO_T}found" >&6
 else
    ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
+   echo "$as_me:1397: result: missing" >&5
+echo "${ECHO_T}missing" >&6
 fi
 
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:987: checking for working autoconf" >&5
+echo "$as_me:1401: checking for working autoconf" >&5
+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
 if (autoconf --version) < /dev/null > /dev/null 2>&1; then
    AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
+   echo "$as_me:1408: result: found" >&5
+echo "${ECHO_T}found" >&6
 else
    AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
+   echo "$as_me:1412: result: missing" >&5
+echo "${ECHO_T}missing" >&6
 fi
 
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1000: checking for working automake" >&5
+echo "$as_me:1416: checking for working automake" >&5
+echo $ECHO_N "checking for working automake... $ECHO_C" >&6
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
 if (automake --version) < /dev/null > /dev/null 2>&1; then
    AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
+   echo "$as_me:1423: result: found" >&5
+echo "${ECHO_T}found" >&6
 else
    AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
+   echo "$as_me:1427: result: missing" >&5
+echo "${ECHO_T}missing" >&6
 fi
 
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1013: checking for working autoheader" >&5
+echo "$as_me:1431: checking for working autoheader" >&5
+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
 if (autoheader --version) < /dev/null > /dev/null 2>&1; then
    AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
+   echo "$as_me:1438: result: found" >&5
+echo "${ECHO_T}found" >&6
 else
    AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
+   echo "$as_me:1442: result: missing" >&5
+echo "${ECHO_T}missing" >&6
 fi
 
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1026: checking for working makeinfo" >&5
+echo "$as_me:1446: checking for working makeinfo" >&5
+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
 if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
    MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
+   echo "$as_me:1453: result: found" >&5
+echo "${ECHO_T}found" >&6
 else
    MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
+   echo "$as_me:1457: result: missing" >&5
+echo "${ECHO_T}missing" >&6
 fi
 
-
-
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1042: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:1461: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat > conftestmake <<\EOF
+  cat >conftest.make <<\EOF
 all:
 	@echo 'ac_maketemp="${MAKE}"'
 EOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
 if test -n "$ac_maketemp"; then
   eval ac_cv_prog_make_${ac_make}_set=yes
 else
   eval ac_cv_prog_make_${ac_make}_set=no
 fi
-rm -f conftestmake
+rm -f conftest.make
 fi
 if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
+  echo "$as_me:1481: result: yes" >&5
+echo "${ECHO_T}yes" >&6
   SET_MAKE=
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:1485: result: no" >&5
+echo "${ECHO_T}no" >&6
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
-# Extract the first word of "gcc", so it can be a program name with args.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:1498: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_CC="${ac_tool_prefix}gcc"
+echo "$as_me:1513: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:1521: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:1524: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1071: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:1533: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_CC="gcc"
+echo "$as_me:1548: found $ac_dir/$ac_word" >&5
+break
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:1556: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:1559: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:1572: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_CC="${ac_tool_prefix}cc"
+echo "$as_me:1587: found $ac_dir/$ac_word" >&5
+break
+done
+
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  echo "$as_me:1595: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:1598: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
 fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:1607: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_CC="cc"
+echo "$as_me:1622: found $ac_dir/$ac_word" >&5
+break
+done
 
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:1630: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:1633: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1101: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:1646: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+  ac_prog_rejected=yes
+  continue
+fi
+ac_cv_prog_CC="cc"
+echo "$as_me:1666: found $ac_dir/$ac_word" >&5
+break
+done
+
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
   set dummy $ac_cv_prog_CC
   shift
-  if test $# -gt 0; then
+  if test $# != 0; then
     # We chose a different compiler from the bogus one.
     # However, it has the same basename, so the bogon will be chosen
     # first if we set CC to just the basename; use the full file name.
     shift
-    set dummy "$ac_dir/$ac_word" "$@"
+    set dummy "$ac_dir/$ac_word" ${1+"$@"}
     shift
     ac_cv_prog_CC="$@"
   fi
 fi
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  echo "$as_me:1688: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:1691: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1152: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:1702: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+echo "$as_me:1717: found $ac_dir/$ac_word" >&5
+break
+done
+
 fi
 fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
+  echo "$as_me:1725: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+  echo "$as_me:1728: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1184: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:1741: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_CC="$ac_prog"
+echo "$as_me:1756: found $ac_dir/$ac_word" >&5
+break
+done
 
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:1764: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:1767: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
 
-cat > conftest.$ac_ext << EOF
+  test -n "$ac_ct_CC" && break
+done
 
-#line 1195 "configure"
+  CC=$ac_ct_CC
+fi
+
+fi
+
+test -z "$CC" && { { echo "$as_me:1779: error: no acceptable cc found in \$PATH" >&5
+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:1784:" \
+     "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:1787: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:1790: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:1792: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:1795: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:1797: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:1800: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+#line 1804 "configure"
 #include "confdefs.h"
 
-main(){return(0);}
-EOF
-if { (eval echo configure:1200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:1820: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:1823: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:1826: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+for ac_file in `ls a.exe conftest.exe 2>/dev/null;
+                ls a.out conftest 2>/dev/null;
+                ls a.* conftest.* 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+    a.out ) # We found the default executable, but exeext='' is most
+            # certainly right.
+            break;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
+          export ac_cv_exeext
+          break;;
+    * ) break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+{ { echo "$as_me:1849: error: C compiler cannot create executables" >&5
+echo "$as_me: error: C compiler cannot create executables" >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:1855: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:1860: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:1866: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:1869: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
   else
-    ac_cv_prog_cc_cross=yes
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:1876: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
   fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
 fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1226: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1231: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1240: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
+echo "$as_me:1884: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:1891: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:1893: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:1896: checking for executable suffix" >&5
+echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
+if { (eval echo "$as_me:1898: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:1901: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          export ac_cv_exeext
+          break;;
+    * ) break;;
+  esac
+done
 else
-  ac_cv_prog_gcc=no
-fi
+  { { echo "$as_me:1917: error: cannot compute EXEEXT: cannot compile and link" >&5
+echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+rm -f conftest$ac_cv_exeext
+echo "$as_me:1923: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
 
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:1929: checking for object suffix" >&5
+echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  GCC=
-fi
+  cat >conftest.$ac_ext <<_ACEOF
+#line 1935 "configure"
+#include "confdefs.h"
 
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1259: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:1947: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:1950: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
 else
-  ac_cv_prog_cc_g=no
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+{ { echo "$as_me:1962: error: cannot compute OBJEXT: cannot compile" >&5
+echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
+   { (exit 1); exit 1; }; }
 fi
-rm -f conftest*
 
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
+echo "$as_me:1969: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:1973: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line 1979 "configure"
+#include "confdefs.h"
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:1994: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:1997: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:2000: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:2003: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_compiler_gnu=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:2015: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:2021: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2027 "configure"
+#include "confdefs.h"
+
+int
+main ()
+{
 
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2039: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:2042: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:2045: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:2048: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:2058: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
 if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
+  CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
   if test "$GCC" = yes; then
     CFLAGS="-g -O2"
@@ -1285,148 +2072,116 @@ else
     CFLAGS=
   fi
 fi
-
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1291: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1296 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
 #endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:1307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1324: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1329 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:1336: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1353: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 1368 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 1385 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 1402 "configure"
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2085: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:2088: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:2091: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:2094: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   ''\
+   '#include <stdlib.h>' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2106 "configure"
 #include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1408: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+#include <stdlib.h>
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2119: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:2122: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:2125: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:2128: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   :
 else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+continue
 fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2138 "configure"
+#include "confdefs.h"
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:2150: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:2153: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:2156: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:2159: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+done
 rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
 fi
-  CPP="$ac_cv_prog_CPP"
+
 else
-  ac_cv_prog_CPP="$CPP"
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
 fi
-echo "$ac_t""$CPP" 1>&6
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 # Check whether --enable-shared or --disable-shared was given.
 if test "${enable_shared+set}" = set; then
@@ -1449,8 +2204,7 @@ no) enable_shared=no ;;
 esac
 else
   enable_shared=yes
-fi
-
+fi;
 # Check whether --enable-static or --disable-static was given.
 if test "${enable_static+set}" = set; then
   enableval="$enable_static"
@@ -1472,8 +2226,7 @@ no) enable_static=no ;;
 esac
 else
   enable_static=yes
-fi
-
+fi;
 # Check whether --enable-fast-install or --disable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
   enableval="$enable_fast_install"
@@ -1495,6 +2248,16 @@ no) enable_fast_install=no ;;
 esac
 else
   enable_fast_install=yes
+fi;
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
 fi
 
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
@@ -1503,13 +2266,12 @@ if test "${with_gnu_ld+set}" = set; then
   test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
-fi
-
+fi;
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1513: checking for ld used by GCC" >&5
+  echo "$as_me:2273: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1538,17 +2300,17 @@ echo "configure:1513: checking for ld used by GCC" >&5
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1543: checking for GNU ld" >&5
+  echo "$as_me:2303: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
 else
-  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1546: checking for non-GNU ld" >&5
+  echo "$as_me:2306: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
 fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
@@ -1571,15 +2333,19 @@ fi
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
+  echo "$as_me:2336: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:2339: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1581: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+test -z "$LD" && { { echo "$as_me:2342: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:2345: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
 if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
@@ -1588,33 +2354,32 @@ else
   lt_cv_prog_gnu_ld=no
 fi
 fi
-
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+echo "$as_me:2357: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1598: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:2361: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_ld_reload_flag='-r'
 fi
-
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+echo "$as_me:2368: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
 reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1610: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:2373: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
     tmp_nm=$ac_dir/${ac_tool_prefix}nm
@@ -1641,33 +2406,24 @@ fi
 fi
 
 NM="$lt_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
+echo "$as_me:2409: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
 
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1648: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
+echo "$as_me:2412: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:2416: result: yes" >&5
+echo "${ECHO_T}yes" >&6
 else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:2419: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
 fi
 
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1669: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:2423: checking how to recognise dependant libraries" >&5
+echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -1678,7 +2434,7 @@ lt_cv_deplibs_check_method='unknown'
 # `unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
-# ['file_magic [regex]'] -- check by looking for files in library path
+# 'file_magic [[regex]]' -- check by looking for files in library path
 # which responds to the $file_magic_cmd with a given egrep regex.
 # If you have `file' or equivalent on your system and you're not sure
 # whether `pass_all' will *always* work, you probably want this one.
@@ -1707,7 +2463,7 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   case "$host_os" in
-  rhapsody* | darwin1.012)
+  rhapsody* | darwin1.[012])
     lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
     ;;
   *) # Darwin 1.3 on
@@ -1766,7 +2522,7 @@ irix5* | irix6*)
 # This must be Linux ELF.
 linux-gnu*)
   case $host_cpu in
-  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
+  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
     lt_cv_deplibs_check_method=pass_all ;;
   *)
     # glibc up to 2.1.1 does not perform some relocations on ARM
@@ -1789,6 +2545,16 @@ newos6*)
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
 osf3* | osf4* | osf5*)
   # this will be overridden with pass_all, but let us keep it just in case
   lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
@@ -1832,84 +2598,18 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
 esac
 
 fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+echo "$as_me:2601: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1842: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1848: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1868: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
-else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:1878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-fi
-fi
-
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
-
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-
-
-
 # Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1909: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:2607: checking command to parse $NM output" >&5
+echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  
+
 # These are sane defaults that work on at least a few old systems.
 # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
@@ -1925,6 +2625,9 @@ symxfrm='\1 \2\3 \3'
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
 
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
 # Define system-specific variables.
 case $host_os in
 aix*)
@@ -1935,6 +2638,7 @@ cygwin* | mingw* | pw32*)
   ;;
 hpux*) # Its linker distinguishes data from code symbols
   lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
 irix*)
   symcode='[BCDEGRST]'
@@ -1981,10 +2685,18 @@ void nm_test_func(){}
 int main(){nm_test_var='a';nm_test_func();return(0);}
 EOF
 
-  if { (eval echo configure:1985: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  if { (eval echo "$as_me:2688: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:2691: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { (eval echo configure:1988: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
+    if { (eval echo "$as_me:2695: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  echo "$as_me:2698: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -2006,23 +2718,23 @@ EOF
 
 	  cat <<EOF >> conftest.$ac_ext
 #if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
+# define lt_ptr void *
 #else
-# define lt_ptr_t char *
+# define lt_ptr char *
 # define const
 #endif
 
 /* The mapping between symbol names and symbols. */
 const struct {
   const char *name;
-  lt_ptr_t address;
+  lt_ptr address;
 }
 lt_preloaded_symbols[] =
 {
 EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
+	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
 	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
+  {0, (lt_ptr) 0}
 };
 
 #ifdef __cplusplus
@@ -2035,7 +2747,11 @@ EOF
 	  save_CFLAGS="$CFLAGS"
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	  if { (eval echo "$as_me:2750: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:2753: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest; then
 	    pipe_works=yes
 	  fi
 	  LIBS="$save_LIBS"
@@ -2068,67 +2784,276 @@ fi
 global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
 if test -z "$lt_cv_sys_global_symbol_pipe"; then
   global_symbol_to_cdecl=
+  global_symbol_to_c_name_address=
 else
   global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
 fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
-  echo "$ac_t""failed" 1>&6
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+  echo "$as_me:2794: result: failed" >&5
+echo "${ECHO_T}failed" >&6
 else
-  echo "$ac_t""ok" 1>&6
+  echo "$as_me:2797: result: ok" >&5
+echo "${ECHO_T}ok" >&6
 fi
 
-for ac_hdr in dlfcn.h
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:2806: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
 do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2085: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2090 "configure"
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2827 "configure"
 #include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
+#include <assert.h>
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:2832: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:2838: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
 else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
+  echo "$as_me: failed program was:" >&5
   cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
+  # Broken: fails on valid input.
+continue
 fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2861 "configure"
+#include "confdefs.h"
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:2865: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:2871: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
 fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  # Passes both tests.
+ac_preproc_ok=:
+break
 fi
+rm -f conftest.err conftest.$ac_ext
+
 done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
 
+    done
+    ac_cv_prog_CPP=$CPP
 
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:2908: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2918 "configure"
+#include "confdefs.h"
+#include <assert.h>
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:2923: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:2929: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line 2952 "configure"
+#include "confdefs.h"
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:2956: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:2962: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:2990: error: C preprocessor \"$CPP\" fails sanity check" >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:3004: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line 3010 "configure"
+#include "confdefs.h"
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:3014: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:3020: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  eval "$as_ac_Header=yes"
+else
+  echo "$as_me: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_ext
+fi
+echo "$as_me:3039: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<EOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+EOF
 
+fi
+done
 
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2130: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+    echo "$as_me:3053: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   case $MAGIC_CMD in
   /*)
@@ -2180,17 +3105,19 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
+  echo "$as_me:3108: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3111: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2192: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+    echo "$as_me:3117: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   case $MAGIC_CMD in
   /*)
@@ -2242,9 +3169,11 @@ fi
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$ac_t""$MAGIC_CMD" 1>&6
+  echo "$as_me:3172: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3175: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
   else
@@ -2256,150 +3185,162 @@ fi
   ;;
 esac
 
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2263: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:3191: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+echo "$as_me:3206: found $ac_dir/$ac_word" >&5
+break
+done
+
 fi
 fi
-RANLIB="$ac_cv_prog_RANLIB"
+RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
+  echo "$as_me:3214: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3217: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
+fi
 if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
+  ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2295: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+echo "$as_me:3226: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_RANLIB="ranlib"
+echo "$as_me:3241: found $ac_dir/$ac_word" >&5
+break
+done
+
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  echo "$as_me:3250: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3253: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
+  RANLIB=$ac_ct_RANLIB
 else
-  RANLIB=":"
-fi
+  RANLIB="$ac_cv_prog_RANLIB"
 fi
 
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2330: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:3265: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+echo "$as_me:3280: found $ac_dir/$ac_word" >&5
+break
+done
+
 fi
 fi
-STRIP="$ac_cv_prog_STRIP"
+STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
+  echo "$as_me:3288: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3291: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
+fi
 if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
+  ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2362: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_STRIP="strip"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+echo "$as_me:3300: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+  ac_save_IFS=$IFS; IFS=$ac_path_separator
+ac_dummy="$PATH"
+for ac_dir in $ac_dummy; do
+  IFS=$ac_save_IFS
+  test -z "$ac_dir" && ac_dir=.
+  $as_executable_p "$ac_dir/$ac_word" || continue
+ac_cv_prog_ac_ct_STRIP="strip"
+echo "$as_me:3315: found $ac_dir/$ac_word" >&5
+break
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
-  echo "$ac_t""$STRIP" 1>&6
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:3324: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:3327: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
+  STRIP=$ac_ct_STRIP
 else
-  STRIP=":"
-fi
+  STRIP="$ac_cv_prog_STRIP"
 fi
 
-
 enable_dlopen=no
 enable_win32_dll=no
 
 # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
   enableval="$enable_libtool_lock"
-  :
-fi
 
+fi;
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -2407,8 +3348,12 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2411 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2412: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 3351 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:3352: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:3355: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -2428,54 +3373,64 @@ case $host in
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2433: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:3376: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  
+
      ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-     cat > conftest.$ac_ext <<EOF
-#line 2446 "configure"
+     cat >conftest.$ac_ext <<_ACEOF
+#line 3389 "configure"
 #include "confdefs.h"
 
-int main() {
+int
+main ()
+{
 
-; return 0; }
-EOF
-if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:3401: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:3404: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:3407: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:3410: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   lt_cv_cc_needs_belf=yes
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  lt_cv_cc_needs_belf=no
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+lt_cv_cc_needs_belf=no
 fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
 ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+echo "$as_me:3426: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
 
-
 esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
@@ -2553,16 +3508,23 @@ old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
 fi
 
 # Allow CC to be a program name with arguments.
 set dummy $CC
 compiler="$2"
 
-echo $ac_n "checking for objdir""... $ac_c" 1>&6
-echo "configure:2566: checking for objdir" >&5
+echo "$as_me:3526: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
 rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
 if test -d .libs; then
@@ -2572,8 +3534,8 @@ else
   objdir=_libs
 fi
 rmdir .libs 2>/dev/null
-echo "$ac_t""$objdir" 1>&6
-
+echo "$as_me:3537: result: $objdir" >&5
+echo "${ECHO_T}$objdir" >&6
 
 # Check whether --with-pic or --without-pic was given.
 if test "${with_pic+set}" = set; then
@@ -2581,17 +3543,16 @@ if test "${with_pic+set}" = set; then
   pic_mode="$withval"
 else
   pic_mode=default
-fi
-
+fi;
 test -z "$pic_mode" && pic_mode=default
 
 # We assume here that the value for lt_cv_prog_cc_pic will not be cached
 # in isolation, and that seeing it set (from the cache) indicates that
 # the associated values are set (in the cache) correctly too.
-echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
-echo "configure:2593: checking for $compiler option to produce PIC" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:3552: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+if test "${lt_cv_prog_cc_pic+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
    lt_cv_prog_cc_pic=
   lt_cv_prog_cc_shlib=
@@ -2611,7 +3572,7 @@ else
       # libC (AIX C++ library), which obviously doesn't included in libraries
       # list by gcc. This cause undefined symbols with -static flags.
       # This hack allows C programs to be linked with "-static -ldl", but
-      # we not sure about C++ programs.
+      # not sure about C++ programs.
       lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
       ;;
     amigaos*)
@@ -2646,13 +3607,13 @@ else
     # PORTME Check for PIC flags for the system compiler.
     case $host_os in
     aix3* | aix4* | aix5*)
+      lt_cv_prog_cc_wl='-Wl,'
       # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        lt_cv_prog_cc_static='-Bstatic'
-        lt_cv_prog_cc_wl='-Wl,'
+	# AIX 5 now supports IA64 processor
+	lt_cv_prog_cc_static='-Bstatic'
       else
-        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
 
@@ -2708,9 +3669,9 @@ else
       lt_cv_prog_cc_pic='-KPIC'
       lt_cv_prog_cc_static='-Bstatic'
       if test "x$host_vendor" = xsni; then
-        lt_cv_prog_cc_wl='-LD'
+	lt_cv_prog_cc_wl='-LD'
       else
-        lt_cv_prog_cc_wl='-Wl,'
+	lt_cv_prog_cc_wl='-Wl,'
       fi
       ;;
 
@@ -2735,28 +3696,44 @@ else
 fi
 
 if test -z "$lt_cv_prog_cc_pic"; then
-  echo "$ac_t""none" 1>&6
+  echo "$as_me:3699: result: none" >&5
+echo "${ECHO_T}none" >&6
 else
-  echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
+  echo "$as_me:3702: result: $lt_cv_prog_cc_pic" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
 
   # Check to make sure the pic_flag actually works.
-  echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
-echo "configure:2745: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
-  if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:3706: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
+  if test "${lt_cv_prog_cc_pic_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
       save_CFLAGS="$CFLAGS"
     CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    cat > conftest.$ac_ext <<EOF
-#line 2752 "configure"
+    cat >conftest.$ac_ext <<_ACEOF
+#line 3714 "configure"
 #include "confdefs.h"
 
-int main() {
+int
+main ()
+{
 
-; return 0; }
-EOF
-if { (eval echo configure:2759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3726: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:3729: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:3732: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:3735: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
         case $host_os in
       hpux9* | hpux10* | hpux11*)
 	# On HP-UX, both CC and GCC only warn that PIC is supported... then
@@ -2772,19 +3749,17 @@ if { (eval echo configure:2759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
 	lt_cv_prog_cc_pic_works=yes
 	;;
       esac
-    
+
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-        lt_cv_prog_cc_pic_works=no
-    
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+      lt_cv_prog_cc_pic_works=no
+
 fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
     CFLAGS="$save_CFLAGS"
-  
-fi
 
+fi
 
   if test "X$lt_cv_prog_cc_pic_works" = Xno; then
     lt_cv_prog_cc_pic=
@@ -2793,51 +3768,68 @@ fi
     lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
   fi
 
-  echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
+  echo "$as_me:3771: result: $lt_cv_prog_cc_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
 fi
 
 # Check for any special shared library compilation flags.
 if test -n "$lt_cv_prog_cc_shlib"; then
-  echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
+  { echo "$as_me:3777: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
+echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
   if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
   else
-   echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
+   { echo "$as_me:3781: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
+echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
     lt_cv_prog_cc_can_build_shared=no
   fi
 fi
 
-echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
-echo "configure:2811: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:3787: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
+if test "${lt_cv_prog_cc_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
     lt_cv_prog_cc_static_works=no
   save_LDFLAGS="$LDFLAGS"
   LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  cat > conftest.$ac_ext <<EOF
-#line 2819 "configure"
+  cat >conftest.$ac_ext <<_ACEOF
+#line 3796 "configure"
 #include "confdefs.h"
 
-int main() {
+int
+main ()
+{
 
-; return 0; }
-EOF
-if { (eval echo configure:2826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:3808: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:3811: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:3814: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:3817: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   lt_cv_prog_cc_static_works=yes
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
 fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
   LDFLAGS="$save_LDFLAGS"
 
 fi
 
-
 # Belt *and* braces to stop my trousers falling down:
 test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
+echo "$as_me:3831: result: $lt_cv_prog_cc_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
 
 pic_flag="$lt_cv_prog_cc_pic"
 special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
@@ -2846,14 +3838,13 @@ link_static_flag="$lt_cv_prog_cc_static"
 no_builtin_flag="$lt_cv_prog_cc_no_builtin"
 can_build_shared="$lt_cv_prog_cc_can_build_shared"
 
-
 # Check to see if options -o and -c are simultaneously supported by compiler
-echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
-echo "configure:2853: checking if $compiler supports -c -o file.$ac_objext" >&5
-if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:3842: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_compiler_c_o+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  
+
 $rm -r conftest 2>/dev/null
 mkdir conftest
 cd conftest
@@ -2868,7 +3859,7 @@ chmod -w .
 save_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
 compiler_c_o=no
-if { (eval echo configure:2872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+if { (eval echo configure:3862: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
   # The compiler can only warn and ignore the option if not recognized
   # So say no if there are warnings
   if test -s out/conftest.err; then
@@ -2892,29 +3883,46 @@ $rm -r conftest 2>/dev/null
 fi
 
 compiler_c_o=$lt_cv_compiler_c_o
-echo "$ac_t""$compiler_c_o" 1>&6
+echo "$as_me:3886: result: $compiler_c_o" >&5
+echo "${ECHO_T}$compiler_c_o" >&6
 
 if test x"$compiler_c_o" = x"yes"; then
   # Check to see if we can write to a .lo
-  echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
-echo "configure:2901: checking if $compiler supports -c -o file.lo" >&5
-  if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:3891: checking if $compiler supports -c -o file.lo" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
+  if test "${lt_cv_compiler_o_lo+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  
+
   lt_cv_compiler_o_lo=no
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -c -o conftest.lo"
-  cat > conftest.$ac_ext <<EOF
-#line 2910 "configure"
+  save_objext="$ac_objext"
+  ac_objext=lo
+  cat >conftest.$ac_ext <<_ACEOF
+#line 3903 "configure"
 #include "confdefs.h"
 
-int main() {
+int
+main ()
+{
 int some_variable = 0;
-; return 0; }
-EOF
-if { (eval echo configure:2917: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3915: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:3918: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:3921: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:3924: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
       # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
@@ -2922,18 +3930,20 @@ if { (eval echo configure:2917: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
     else
       lt_cv_compiler_o_lo=yes
     fi
-  
+
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
 fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
+  ac_objext="$save_objext"
   CFLAGS="$save_CFLAGS"
-  
+
 fi
 
   compiler_o_lo=$lt_cv_compiler_o_lo
-  echo "$ac_t""$compiler_o_lo" 1>&6
+  echo "$as_me:3945: result: $compiler_o_lo" >&5
+echo "${ECHO_T}$compiler_o_lo" >&6
 else
   compiler_o_lo=no
 fi
@@ -2942,17 +3952,19 @@ fi
 hard_links="nottested"
 if test "$compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
-echo "configure:2947: checking if we can lock with hard links" >&5
+  echo "$as_me:3955: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$ac_t""$hard_links" 1>&6
+  echo "$as_me:3963: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
   if test "$hard_links" = no; then
-    echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
+    { echo "$as_me:3966: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -2961,22 +3973,36 @@ fi
 
 if test "$GCC" = yes; then
   # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
-echo "configure:2966: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  echo "$as_me:3976: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
   echo "int some_variable = 0;" > conftest.$ac_ext
   save_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
   compiler_rtti_exceptions=no
-  cat > conftest.$ac_ext <<EOF
-#line 2972 "configure"
+  cat >conftest.$ac_ext <<_ACEOF
+#line 3983 "configure"
 #include "confdefs.h"
 
-int main() {
+int
+main ()
+{
 int some_variable = 0;
-; return 0; }
-EOF
-if { (eval echo configure:2979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:3995: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:3998: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:4001: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:4004: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
       # The compiler can only warn and ignore the option if not recognized
     # So say no if there are warnings
     if test -s conftest.err; then
@@ -2984,14 +4010,15 @@ if { (eval echo configure:2979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
     else
       compiler_rtti_exceptions=yes
     fi
-  
+
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
 fi
-rm -f conftest*
+rm -f conftest.$ac_objext conftest.$ac_ext
   CFLAGS="$save_CFLAGS"
-  echo "$ac_t""$compiler_rtti_exceptions" 1>&6
+  echo "$as_me:4020: result: $compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$compiler_rtti_exceptions" >&6
 
   if test "$compiler_rtti_exceptions" = "yes"; then
     no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
@@ -3001,8 +4028,8 @@ rm -f conftest*
 fi
 
 # See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
-echo "configure:3006: checking whether the linker ($LD) supports shared libraries" >&5
+echo "$as_me:4031: checking whether the linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
 
 allow_undefined_flag=
 no_undefined_flag=
@@ -3043,7 +4070,7 @@ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
 extract_expsyms_cmds=
 
 case $host_os in
-cygwin* | mingw* | pw32* )
+cygwin* | mingw* | pw32*)
   # FIXME: the MSVC++ port hasn't been tested in a loooong time
   # When not using gcc, we currently assume that we are using
   # Microsoft Visual C++.
@@ -3051,7 +4078,9 @@ cygwin* | mingw* | pw32* )
     with_gnu_ld=no
   fi
   ;;
-
+openbsd*)
+  with_gnu_ld=no
+  ;;
 esac
 
 ld_shlibs=yes
@@ -3138,7 +4167,7 @@ EOF
     # can override, but on older systems we have to supply one (in ltdll.c)
     if test "x$lt_cv_need_dllmain" = "xyes"; then
       ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
 	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
     else
       ltdll_obj=
@@ -3157,18 +4186,18 @@ EOF
     # is EXPORTS), use it as is.
     # If DATA tags from a recent dlltool are present, honour them!
     archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-        cp $export_symbols $output_objdir/$soname-def;
+	cp $export_symbols $output_objdir/$soname-def;
       else
-        echo EXPORTS > $output_objdir/$soname-def;
-        _lt_hint=1;
-        cat $export_symbols | while read symbol; do
-         set dummy \$symbol;
-         case \$# in
-           2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-           *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
-         esac;
-         _lt_hint=`expr 1 + \$_lt_hint`;
-        done;
+	echo EXPORTS > $output_objdir/$soname-def;
+	_lt_hint=1;
+	cat $export_symbols | while read symbol; do
+	 set dummy \$symbol;
+	 case \$# in
+	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+	 esac;
+	 _lt_hint=`expr 1 + \$_lt_hint`;
+	done;
       fi~
       '"$ltdll_cmds"'
       $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
@@ -3263,80 +4292,96 @@ else
     ;;
 
   aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
     # When large executables or shared objects are built, AIX ld can
     # have problems creating the table of contents.  If linking a library
     # or program results in "error TOC overflow" add -mminimal-toc to
     # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
     # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
+    hardcode_direct=yes
     archive_cmds=''
     hardcode_libdir_separator=':'
     if test "$GCC" = yes; then
-      collect2name=`${CC} -print-prog-name=collect2`
-      if test -f "$collect2name" && \
-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-      then
-	# We have reworked collect2
-	hardcode_direct=yes
-      else
-        # We have old collect2
-        hardcode_direct=unsupported
-        # It fails to find uninstalled libraries when the uninstalled
-        # path is not listed in the libpath.  Setting hardcode_minus_L
-        # to unsupported forces relinking
-        hardcode_minus_L=yes
-        hardcode_libdir_flag_spec='-L$libdir'
-        hardcode_libdir_separator=
-      fi
+      case $host_os in aix4.[012]|aix4.[012].*)
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+	else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	fi
+      esac
+
       shared_flag='-shared'
     else
+      # not using gcc
       if test "$host_cpu" = ia64; then
-        shared_flag='-G'
+	shared_flag='${wl}-G'
       else
-        shared_flag='${wl}-bM:SRE'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
       fi
-      hardcode_direct=yes
     fi
 
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      # Test if we are trying to use run time linking, or normal AIX style linking.
-      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
-      aix_use_runtimelinking=no
-      for ld_flag in $LDFLAGS; do
-        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
-          aix_use_runtimelinking=yes
-          break
-        fi
-      done
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
     # It seems that -bexpall can do strange things, so it is better to
     # generate a list of symbols to export.
     always_export_symbols=yes
     if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag='-berok'
       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      allow_undefined_flag=' -Wl,-G'
-      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
     else
       if test "$host_cpu" = ia64; then
-        hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-       allow_undefined_flag="-znodefs"
-        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag="-z nodefs"
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
       else
-        hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-        # Warning - without using the other run time loading flags, -berok will
-        #           link without error, but may produce a broken library.
-        allow_undefined_flag='${wl}-berok'
-        # This is a bit strange, but is similar to how AIX traditionally builds
-        # it's shared libraries.
-        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='${wl}-berok'
+	# This is a bit strange, but is similar to how AIX traditionally builds
+	# it's shared libraries.
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
       fi
     fi
     ;;
@@ -3368,11 +4413,18 @@ else
     ;;
 
   darwin* | rhapsody*)
-    allow_undefined_flag='-undefined suppress'
+    case "$host_os" in
+    rhapsody* | darwin1.[012])
+      allow_undefined_flag='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      allow_undefined_flag='-flat_namespace -undefined suppress'
+      ;;
+    esac
     # FIXME: Relying on posixy $() will cause problems for
     #        cross-compilation, but unfortunately the echo tests do not
     #        yet detect zsh echo's removal of \ escapes.
-    archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
+    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
     # We need to add '_' to the symbols in $export_symbols first
     #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
     hardcode_direct=yes
@@ -3447,7 +4499,7 @@ else
     ;;
 
   newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
     hardcode_direct=yes
     hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator=:
@@ -3455,10 +4507,24 @@ else
     ;;
 
   openbsd*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
     hardcode_direct=yes
     hardcode_shlibpath_var=no
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+    else
+      case "$host_os" in
+      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_libdir_flag_spec='-R$libdir'
+        ;;
+      *)
+        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        ;;
+      esac
+    fi
     ;;
 
   os2*)
@@ -3503,10 +4569,39 @@ else
     hardcode_shlibpath_var=no
     runpath_var=LD_RUN_PATH
     hardcode_runpath_var=yes
+    export_dynamic_flag_spec='${wl}-Bexport'
     ;;
 
   solaris*)
+    # gcc --version < 3.0 without binutils cannot create self contained
+    # shared libraries reliably, requiring libgcc.a to resolve some of
+    # the object symbols generated in some cases.  Libraries that use
+    # assert need libgcc.a to resolve __eprintf, for example.  Linking
+    # a copy of libgcc.a into every shared library to guarantee resolving
+    # such symbols causes other problems:  According to Tim Van Holder
+    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+    # (to the application) exception stack for one thing.
     no_undefined_flag=' -z defs'
+    if test "$GCC" = yes; then
+      case `$CC --version 2>/dev/null` in
+      [12].*)
+	cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries.  However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
+*** upgrade to a newer version of GCC.  Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+        no_undefined_flag=
+	;;
+      esac
+    fi
     # $CC -shared without GNU ld will not create a library from C++
     # object files and a static libstdc++, better avoid it by now
     archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
@@ -3538,7 +4633,7 @@ else
 
   sysv4)
     if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
+      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes # is this really true???
     else
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
@@ -3613,12 +4708,13 @@ else
     ;;
   esac
 fi
-echo "$ac_t""$ld_shlibs" 1>&6
+echo "$as_me:4711: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
 test "$ld_shlibs" = no && can_build_shared=no
 
 # Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
-echo "configure:3622: checking how to hardcode library paths into programs" >&5
+echo "$as_me:4716: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" || \
    test -n "$runpath_var"; then
@@ -3641,26 +4737,29 @@ else
   # directories.
   hardcode_action=unsupported
 fi
-echo "$ac_t""$hardcode_action" 1>&6
+echo "$as_me:4740: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
 
 striplib=
 old_striplib=
-echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
-echo "configure:3650: checking whether stripping libraries is possible" >&5
+echo "$as_me:4745: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$ac_t""yes" 1>&6
+  echo "$as_me:4750: result: yes" >&5
+echo "${ECHO_T}yes" >&6
 else
-  echo "$ac_t""no" 1>&6
+  echo "$as_me:4753: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 # PORTME Fill in your ld.so characteristics
-echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
-echo "configure:3664: checking dynamic linker characteristics" >&5
+echo "$as_me:4761: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -3698,22 +4797,24 @@ aix4* | aix5*)
     # depend on `.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
-       aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-           echo ' yes '
-           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-        :
-      else
-        can_build_shared=no
-      fi
-      ;;
+      aix4 | aix4.[01] | aix4.[01].*)
+	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	     echo ' yes '
+	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	  :
+	else
+	  can_build_shared=no
+	fi
+	;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
+    # AIX (on Power*) has no versioning support, so currently we can
+    # not hardcode correct soname into executable. Probably we can
+    # add versioning support to collect2, so additional links can
+    # be useful in future.
     if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
-      # lib<name>.a to let people know that these are not typical AIX shared libraries.
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
       library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
     else
       # We preserve .a as extension for shared libraries through AIX4.2
@@ -3722,7 +4823,6 @@ aix4* | aix5*)
       soname_spec='${libname}${release}.so$major'
     fi
     shlibpath_var=LIBPATH
-    deplibs_check_method=pass_all
   fi
   ;;
 
@@ -3935,9 +5035,19 @@ newsos6)
 
 openbsd*)
   version_type=sunos
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-    need_version=no
+  need_lib_prefix=no
+  need_version=no
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case "$host_os" in
+    openbsd2.[89] | openbsd2.[89].*)
+      shlibpath_overrides_runpath=no
+      ;;
+    *)
+      shlibpath_overrides_runpath=yes
+      ;;
+    esac
+  else
+    shlibpath_overrides_runpath=yes
   fi
   library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
@@ -4041,13 +5151,46 @@ sysv4*MP*)
   dynamic_linker=no
   ;;
 esac
-echo "$ac_t""$dynamic_linker" 1>&6
+echo "$as_me:5154: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
 test "$dynamic_linker" = no && can_build_shared=no
 
 # Report the final consequences.
-echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
-echo "configure:4050: checking if libtool supports shared libraries" >&5
-echo "$ac_t""$can_build_shared" 1>&6
+echo "$as_me:5159: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:5161: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:5164: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+echo "$as_me:5185: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:5188: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:5192: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
 
 if test "$hardcode_action" = relink; then
   # Fast installation is not supported
@@ -4084,224 +5227,345 @@ else
    ;;
 
   *)
-    echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4089: checking for dlopen in -ldl" >&5
-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+    echo "$as_me:5230: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldl  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4097 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo configure:4108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "configure:4127: checking for dlopen" >&5
-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 4132 "configure"
+  cat >conftest.$ac_ext <<_ACEOF
+#line 5236 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen(); below.  */
+    which can conflict with char shl_load (); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 /* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char dlopen();
-
-int main() {
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+char (*f) ();
 
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
 choke me
 #else
-dlopen();
+f = shl_load;
 #endif
 
-; return 0; }
-EOF
-if { (eval echo configure:4155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_dlopen=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_dlopen=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dlopen"
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5267: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5270: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5273: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5276: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:5286: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
 else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "configure:4173: checking for shl_load" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:5291: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 4178 "configure"
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 5299 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5318: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5321: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5324: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5327: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:5338: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:5343: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line 5349 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load(); below.  */
+    which can conflict with char dlopen (); below.  */
 #include <assert.h>
 /* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 /* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char shl_load();
-
-int main() {
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+char (*f) ();
 
+int
+main ()
+{
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
 choke me
 #else
-shl_load();
+f = dlopen;
 #endif
 
-; return 0; }
-EOF
-if { (eval echo configure:4201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_shl_load=yes"
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5380: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5383: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5386: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5389: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:5399: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
 else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_shl_load=no"
-fi
-rm -f conftest*
-fi
+  echo "$as_me:5404: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 5412 "configure"
+#include "confdefs.h"
 
-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="shl_load"
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5431: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5434: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5437: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5440: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:5451: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
-echo "configure:4219: checking for dlopen in -lsvld" >&5
-ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:5456: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_save_LIBS="$LIBS"
+  ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsvld  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4227 "configure"
+cat >conftest.$ac_ext <<_ACEOF
+#line 5464 "configure"
 #include "confdefs.h"
+
 /* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 /* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo configure:4238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5483: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5486: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5489: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5492: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:5503: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:4257: checking for shl_load in -ldld" >&5
-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+  echo "$as_me:5508: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_save_LIBS="$LIBS"
+  ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldld  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4265 "configure"
+cat >conftest.$ac_ext <<_ACEOF
+#line 5516 "configure"
 #include "confdefs.h"
+
 /* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
 /* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char shl_load();
-
-int main() {
-shl_load()
-; return 0; }
-EOF
-if { (eval echo configure:4276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:5535: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5538: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:5541: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:5544: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:5555: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
 fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
 
 fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-else
-  echo "$ac_t""no" 1>&6
-fi
 
-	    
 fi
 
-          
 fi
 
-        
 fi
 
-      
 fi
 
     ;;
@@ -4324,10 +5588,10 @@ fi
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4329: checking whether a program can dlopen itself" >&5
-if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+    echo "$as_me:5591: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self=cross
@@ -4335,7 +5599,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 4339 "configure"
+#line 5602 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -4396,7 +5660,11 @@ int main ()
     exit (status);
 }
 EOF
-  if { (eval echo configure:4400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  if { (eval echo "$as_me:5663: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5666: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -4411,17 +5679,16 @@ EOF
 fi
 rm -fr conftest*
 
-    
 fi
-
-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+echo "$as_me:5683: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       LDFLAGS="$LDFLAGS $link_static_flag"
-      echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "configure:4423: checking whether a statically linked program can dlopen itself" >&5
-if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+      echo "$as_me:5688: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   	  if test "$cross_compiling" = yes; then :
   lt_cv_dlopen_self_static=cross
@@ -4429,7 +5696,7 @@ else
     lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 4433 "configure"
+#line 5699 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -4490,7 +5757,11 @@ int main ()
     exit (status);
 }
 EOF
-  if { (eval echo configure:4494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  if { (eval echo "$as_me:5760: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:5763: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -4505,10 +5776,9 @@ EOF
 fi
 rm -fr conftest*
 
-      
 fi
-
-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+echo "$as_me:5780: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -4528,7 +5798,6 @@ echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
   esac
 fi
 
-
 if test "$enable_shared" = yes && test "$GCC" = yes; then
   case $archive_cmds in
   *'~'*)
@@ -4538,15 +5807,19 @@ if test "$enable_shared" = yes && test "$GCC" = yes; then
     # Test whether the compiler implicitly links with -lc since on some
     # systems, -lgcc has to come before -lc. If gcc already passes -lc
     # to ld, don't add -lc before -lgcc.
-    echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
-echo "configure:4543: checking whether -lc should be explicitly linked in" >&5
-    if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+    echo "$as_me:5810: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+    if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   $rm conftest*
     echo 'static int dummy;' > conftest.$ac_ext
 
-    if { (eval echo configure:4550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+    if { (eval echo "$as_me:5818: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:5821: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
       soname=conftest
       lib=conftest
       libobjs=conftest.$ac_objext
@@ -4559,7 +5832,11 @@ else
       libname=conftest
       save_allow_undefined_flag=$allow_undefined_flag
       allow_undefined_flag=
-      if { (eval echo configure:4563: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
+      if { (eval echo "$as_me:5835: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:5838: \$? = $ac_status" >&5
+  (exit $ac_status); }
       then
 	lt_cv_archive_cmds_need_lc=no
       else
@@ -4571,7 +5848,8 @@ else
     fi
 fi
 
-    echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
+    echo "$as_me:5851: result: $lt_cv_archive_cmds_need_lc" >&5
+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
     ;;
   esac
 fi
@@ -4611,6 +5889,7 @@ if test -f "$ltmain"; then
     old_striplib striplib file_magic_cmd export_symbols_cmds \
     deplibs_check_method allow_undefined_flag no_undefined_flag \
     finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    global_symbol_to_c_name_address \
     hardcode_libdir_flag_spec hardcode_libdir_separator  \
     sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
     compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
@@ -4677,12 +5956,12 @@ SHELL=$lt_SHELL
 # Whether or not to build shared libraries.
 build_libtool_libs=$enable_shared
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
 # Whether or not to build static libraries.
 build_old_libs=$enable_static
 
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
@@ -4848,6 +6127,9 @@ global_symbol_pipe=$lt_global_symbol_pipe
 # Transform the output of nm in a proper C declaration
 global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
 
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
 # This is the shared library runtime path variable.
 runpath_var=$runpath_var
 
@@ -4970,9 +6252,9 @@ EOF
 #   return TRUE;
 # }
 # /* ltdll.c ends here */
-        # This is a source program that is used to create import libraries
-        # on Windows for dlls which lack them. Don't remove nor modify the
-        # starting and closing comments
+	# This is a source program that is used to create import libraries
+	# on Windows for dlls which lack them. Don't remove nor modify the
+	# starting and closing comments
 # /* impgen.c starts here */
 # /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
 #
@@ -5123,10 +6405,6 @@ EOF
   chmod +x "$ofile"
 fi
 
-
-
-
-
 # This can be used to rebuild libtool when needed
 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
 
@@ -5135,8 +6413,6 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 # Prevent multiple expansion
 
-
-
 kernel_version=`uname -r 2>&1`
 echo -n "checking for kernel version ... "
 case "$kernel_version" in
@@ -5150,344 +6426,704 @@ if test "$_k_verc_fail" ; then
   echo "  Please update your system to a kernel version of 2.2.x or higher."
 fi
 
-
-ac_safe=`echo "getopt.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for getopt.h""... $ac_c" 1>&6
-echo "configure:5157: checking for getopt.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:6429: checking for getopt.h" >&5
+echo $ECHO_N "checking for getopt.h... $ECHO_C" >&6
+if test "${ac_cv_header_getopt_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 5162 "configure"
+  cat >conftest.$ac_ext <<_ACEOF
+#line 6435 "configure"
 #include "confdefs.h"
 #include <getopt.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5167: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
+_ACEOF
+if { (eval echo "$as_me:6439: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  egrep -v '^ *\+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:6445: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_cv_header_getopt_h=yes
 else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
+  echo "$as_me: failed program was:" >&5
   cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
+  ac_cv_header_getopt_h=no
 fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_ext
 fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
+echo "$as_me:6464: result: $ac_cv_header_getopt_h" >&5
+echo "${ECHO_T}$ac_cv_header_getopt_h" >&6
+if test $ac_cv_header_getopt_h = yes; then
   HAVE_GETOPT_H=1
 else
-  echo "$ac_t""no" 1>&6
-HAVE_GETOPT_H=0
+  HAVE_GETOPT_H=0
 fi
 
-
-
-
 # could not find a way to compile the kernel module correctly
 #    kernel/Makefile
-trap '' 1 2 15
-cat > confcache <<\EOF
+ac_config_files="$ac_config_files Makefile kernel/Makefile libmpio/Makefile mpiosh/Makefile mpio.spec"
+cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
 #
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
 #
-EOF
+# `ac_cv_env_foo' variables (set or unset) will be overriden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
 # So, don't put newlines in cache variables' values.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+        "s/'/'\\\\''/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if cmp -s $cache_file confcache; then :; else
   if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
   else
     echo "not updating unwritable cache $cache_file"
   fi
 fi
 rm -f confcache
 
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
 test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ 	]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ 	]*$//;
+}'
 fi
 
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\EOF
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*([^)]*)\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ 	`~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
 EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
 
-
-# Without the "./", some shells look in PATH for config.status.
 : ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:6584: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
 # Generated automatically by configure.
 # Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
 # Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
+# configure, is in config.log if it exists.
 
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
+debug=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+ac_cs_invocation="\$0 \$@"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+
+# Name of the executable.
+as_me=`echo "$0" |sed 's,.*[\\/],,'`
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+as_executable_p="test -f"
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+# NLS nuisances.
+$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
+$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
+$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
+$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
+$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
+$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
+$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
+$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
+
+exec 6>&1
+
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\EOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+EOF
+
+cat >>$CONFIG_STATUS <<EOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.52,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+EOF
+
+cat >>$CONFIG_STATUS <<\EOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
 do
-  case "\$ac_option" in
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    shift
+    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
+    shift
+    ;;
+  -*);;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_need_defaults=false;;
+  esac
+
+  case $1 in
+  # Handling of the options.
+EOF
+cat >>$CONFIG_STATUS <<EOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
+    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
+    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
+EOF
+cat >>$CONFIG_STATUS <<\EOF
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:6752: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    shift
+    CONFIG_FILES="$CONFIG_FILES $1"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $1"
+    ac_need_defaults=false;;
+
+  # This is an error.
+  -*) { { echo "$as_me:6771: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
   esac
+  shift
 done
 
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
+exec 5>>config.log
+cat >&5 << _ACEOF
+
+## ----------------------- ##
+## Running config.status.  ##
+## ----------------------- ##
 
-trap 'rm -fr `echo "Makefile
-    kernel/Makefile
-    libmpio/Makefile
-    mpiosh/Makefile " | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+This file was extended by $as_me 2.52, executed with
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  > $ac_cs_invocation
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+
+_ACEOF
 EOF
-cat >> $CONFIG_STATUS <<EOF
 
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CC@%$CC%g
-s%@LN_S@%$LN_S%g
-s%@OBJEXT@%$OBJEXT%g
-s%@EXEEXT@%$EXEEXT%g
-s%@ECHO@%$ECHO%g
-s%@RANLIB@%$RANLIB%g
-s%@STRIP@%$STRIP%g
-s%@CPP@%$CPP%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@HAVE_GETOPT_H@%$HAVE_GETOPT_H%g
+cat >>$CONFIG_STATUS <<\EOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "kernel/Makefile" ) CONFIG_FILES="$CONFIG_FILES kernel/Makefile" ;;
+  "libmpio/Makefile" ) CONFIG_FILES="$CONFIG_FILES libmpio/Makefile" ;;
+  "mpiosh/Makefile" ) CONFIG_FILES="$CONFIG_FILES mpiosh/Makefile" ;;
+  "mpio.spec" ) CONFIG_FILES="$CONFIG_FILES mpio.spec" ;;
+  *) { { echo "$as_me:6811: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=$TMPDIR/cs$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   { (exit 1); exit 1; }
+}
+
+EOF
+
+cat >>$CONFIG_STATUS <<EOF
+
+#
+# CONFIG_FILES section.
+#
 
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@DEFS@,$DEFS,;t t
+s,@LIBS@,$LIBS,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@LN_S@,$LN_S,;t t
+s,@ECHO@,$ECHO,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@CPP@,$CPP,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
+s,@HAVE_GETOPT_H@,$HAVE_GETOPT_H,;t t
 CEOF
+
 EOF
 
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
+  cat >>$CONFIG_STATUS <<\EOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
     else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
     fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
   fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
+fi # test -n "$CONFIG_FILES"
 
-CONFIG_FILES=\${CONFIG_FILES-"Makefile
-    kernel/Makefile
-    libmpio/Makefile
-    mpiosh/Makefile "}
 EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+cat >>$CONFIG_STATUS <<\EOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
   # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
   esac
 
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
   if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    { case "$ac_dir" in
+  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
+  *)                      as_incr_dir=.;;
+esac
+as_dummy="$ac_dir"
+for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
+  case $as_mkdir_dir in
+    # Skip DOS drivespec
+    ?:) as_incr_dir=$as_mkdir_dir ;;
+    *)
+      as_incr_dir=$as_incr_dir/$as_mkdir_dir
+      test -d "$as_incr_dir" || mkdir "$as_incr_dir"
+    ;;
+  esac
+done; }
+
+    ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
     # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+    ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
   else
     ac_dir_suffix= ac_dots=
   fi
 
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  case $srcdir in
+  .)  ac_srcdir=.
+      if test -z "$ac_dots"; then
+         ac_top_srcdir=.
+      else
+         ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'`
+      fi ;;
+  [\\/]* | ?:[\\/]* )
+      ac_srcdir=$srcdir$ac_dir_suffix;
+      ac_top_srcdir=$srcdir ;;
   *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+    ac_srcdir=$ac_dots$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_dots$srcdir ;;
   esac
 
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_dots$INSTALL ;;
   esac
 
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:7044: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated automatically by config.status.  */
+  configure_input="Generated automatically from `echo $ac_file_in |
+                                                 sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:7062: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         echo $f;;
+      *) # Relative
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:7075: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         fi;;
+      esac
+    done` || { (exit 1); exit 1; }
 EOF
-cat >> $CONFIG_STATUS <<EOF
-
+cat >>$CONFIG_STATUS <<EOF
+  sed "$ac_vpsub
+$extrasub
 EOF
-cat >> $CONFIG_STATUS <<\EOF
+cat >>$CONFIG_STATUS <<\EOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
 
-exit 0
+done
 EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
+cat >>$CONFIG_STATUS <<\EOF
 
+{ (exit 0); exit 0; }
+EOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
 
diff --git a/configure.in b/configure.in
index c17da4c..560d488 100644
--- a/configure.in
+++ b/configure.in
@@ -6,7 +6,7 @@ dnl AM_CONFIG_HEADER(src/config.h)
 AC_CANONICAL_SYSTEM()
 AC_MSG_RESULT(Building for a ${host} host.)
 
-AM_INIT_AUTOMAKE(mpio, 0.0.1)
+AM_INIT_AUTOMAKE(mpio, 0.5.0)
 
 dnl Checks for programs.
 
@@ -41,6 +41,8 @@ AC_OUTPUT(
     Makefile
     kernel/Makefile
     libmpio/Makefile
-    mpiosh/Makefile )
+    mpiosh/Makefile
+    mpio.spec
+)
 
 
diff --git a/kernel/Makefile.in b/kernel/Makefile.in
index 484222e..a1a7c68 100644
--- a/kernel/Makefile.in
+++ b/kernel/Makefile.in
@@ -80,8 +80,7 @@ STRIP = @STRIP@
 VERSION = @VERSION@
 
 INCLUDES = -I/usr/src/linux/include
-KCFLAGS = -D__KERNEL__ -I$(INCLUDE) -Wall -Wstrict-prototypes -O2 \
-	-fomit-frame-pointer -pipe -DMODULE
+KCFLAGS = -D__KERNEL__ -I$(INCLUDE) -Wall -Wstrict-prototypes -O2 	-fomit-frame-pointer -pipe -DMODULE
 
 
 bin_PROGRAMS = mpio.o
diff --git a/libmpio/Makefile.in b/libmpio/Makefile.in
index f1dbb1b..66751bd 100644
--- a/libmpio/Makefile.in
+++ b/libmpio/Makefile.in
@@ -83,28 +83,13 @@ INCLUDES =
 
 lib_LTLIBRARIES = libmpio.la
 
-libmpio_la_SOURCES = \
-		mpio.c \
-		io.c \
-		debug.c \
-		smartmedia.c \
-		directory.c \
-		fat.c \
-		ecc.c
-
-
-pkginclude_HEADERS = \
-		mpio.h \
-		defs.h
-
-
-noinst_HEADERS = \
-		io.h \
-		debug.h \
-		smartmedia.h \
-		directory.h \
-		fat.h \
-		ecc.h
+libmpio_la_SOURCES =  		mpio.c 		io.c 		debug.c 		smartmedia.c 		directory.c 		fat.c 		ecc.c
+
+
+pkginclude_HEADERS =  		mpio.h 		defs.h
+
+
+noinst_HEADERS =  		io.h 		debug.h 		smartmedia.h 		directory.h 		fat.h 		ecc.h
 
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_CLEAN_FILES = 
diff --git a/mpio.spec.in b/mpio.spec.in
new file mode 100644
index 0000000..301850b
--- /dev/null
+++ b/mpio.spec.in
@@ -0,0 +1,47 @@
+# @configure_input@
+
+Version: @VERSION@
+Summary: MPIO - providing access to MPIO mp3 players
+Name: mpio
+Release: 1
+Copyright: see COPYING
+Group: Applications/MultiMedia
+Source: http://download.sourceforge.net/mpio/
+Prefix: /usr
+Buildroot: /var/tmp/mpio-%version-buildroot/
+Packager: Andreas Büsching <crunchy@tzi.de>
+
+%define confdir /etc
+
+%description
+This is a project for using Digitalway/Adtec digital audio player MPIO
+(DMG, DMK, DME) under Linux. It provides Linux kernel module driver,
+userspace library and utility.
+
+%prep
+%setup
+CFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%prefix
+
+%build
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make DESTDIR=$RPM_BUILD_ROOT install-strip
+
+%files
+# %attr(750,root,news) %dir %confdir/
+# %attr(640,root,news) %confdir/config.example
+# %defattr(755,root,root)
+# %prefix/bin/newsq
+# %defattr(755,root,root)
+# %prefix/sbin/*
+# %defattr(644,root,root)
+# %doc %_mandir/man1/*
+# %doc %_mandir/man8/*
+
+%doc COPYING ChangeLog INSTALL NEWS
+%doc README TODO
+
+%clean
+rm -rf $RPM_BUILD_ROOT
diff --git a/mpiosh/callback.c b/mpiosh/callback.c
index deaec72..00163e4 100644
--- a/mpiosh/callback.c
+++ b/mpiosh/callback.c
@@ -2,7 +2,7 @@
  *
  * Author: Andreas Büsching  <crunchy@tzi.de>
  *
- * $Id: callback.c,v 1.4 2002/09/13 19:06:30 crunchy Exp $
+ * $Id: callback.c,v 1.5 2002/09/14 11:19:30 crunchy Exp $
  *
  * Copyright (C) 2001 Andreas Büsching <crunchy@tzi.de>
  *
@@ -253,6 +253,8 @@ mpiosh_cmd_mget(char *args[])
 
   MPIOSH_CHECK_CONNECTION_CLOSED;
   MPIOSH_CHECK_ARG;
+
+  mpiosh_command_regex_fix(args);
   
   while (args[i] != NULL) {
     if ((error = regcomp(&regex, args[i], REG_NOSUB))) {
@@ -323,6 +325,7 @@ mpiosh_cmd_mput(char *args[])
   MPIOSH_CHECK_CONNECTION_CLOSED;
   MPIOSH_CHECK_ARG;
   
+  mpiosh_command_regex_fix(args);
   getcwd(dir_buf, NAME_MAX);
   while (args[i] != NULL) {
     if ((error = regcomp(&regex, args[i], REG_NOSUB))) {
@@ -396,6 +399,7 @@ mpiosh_cmd_mdel(char *args[])
   MPIOSH_CHECK_CONNECTION_CLOSED;
   MPIOSH_CHECK_ARG;
   
+  mpiosh_command_regex_fix(args);
   while (args[i] != NULL) {
     if ((error = regcomp(&regex, args[i], REG_NOSUB))) {
       regerror(error, &regex, errortext, 100);
diff --git a/mpiosh/mpiosh.c b/mpiosh/mpiosh.c
index 7f8c359..75a01b4 100644
--- a/mpiosh/mpiosh.c
+++ b/mpiosh/mpiosh.c
@@ -2,7 +2,7 @@
 
 /* 
  *
- * $Id: mpiosh.c,v 1.6 2002/09/14 09:55:31 crunchy Exp $
+ * $Id: mpiosh.c,v 1.7 2002/09/14 11:19:30 crunchy Exp $
  *
  * Author: Andreas Büsching  <crunchy@tzi.de>
  *
@@ -183,7 +183,7 @@ mpiosh_init(void)
 }
 
 char **
-mpiosh_command_split(char *line)
+mpiosh_command_split_line(char *line)
 {
   char **cmds, *cmd;
   int count = 1;
@@ -240,6 +240,54 @@ mpiosh_command_find(char *line)
   return NULL;
 }
 
+void
+mpiosh_command_regex_fix(char *argv[])
+{
+  char **walk;
+  char *new, *new_pos, *help;
+  char find[] = { '.', '*' };
+  char *replace[] = { "\\.", ".*" };
+  int count, i;
+  
+  for (i = 0; i < sizeof find; i++) {    
+    walk = argv;
+    while (*walk) {
+      help = *walk, count = 0;
+      while (*help != '\0')
+	if (*help++ == find[i]) count++;
+      new_pos = new = malloc(strlen(*walk) + 1 + count);
+      help = *walk;
+      while (*help != '\0') {
+	if (*help == find[i]) {
+	  *new_pos++ = replace[i][0];
+	  *new_pos++ = replace[i][1];
+	  help++;
+	} else
+	  *new_pos++ = *help++;
+      }
+      *new_pos = '\0';
+      free(*walk);
+      *walk = new;
+      walk++;
+    }
+  }
+
+  walk = argv;
+  while (*walk) {
+    help = *walk;
+    new = malloc(strlen(help) + 3);
+    *walk = new;
+    
+    *new++ = '^';
+    strcpy(new, help);
+    *(new + strlen(help)) = '$';
+    *(new + strlen(help) + 1) = '\0';
+
+    free(help);
+    walk++;
+  }  
+}
+
 char **
 mpiosh_command_get_args(char *line)
 {
@@ -347,7 +395,10 @@ mpiosh_signal_handler(int signal)
   mpiosh_cancel = 1;
 }
 
-void mpiosh_noredisplay(void) {}
+void
+mpiosh_noredisplay(void)
+{
+}
 
 int
 main(int argc, char *argv[]) {
@@ -400,7 +451,7 @@ main(int argc, char *argv[]) {
       continue;
     }
 
-    cmds = mpiosh_command_split(line);
+    cmds = mpiosh_command_split_line(line);
 
     if (cmds[0][0] == '\0') {
       free(cmds);
diff --git a/mpiosh/mpiosh.h b/mpiosh/mpiosh.h
index 944e73d..a983293 100644
--- a/mpiosh/mpiosh.h
+++ b/mpiosh/mpiosh.h
@@ -2,7 +2,7 @@
  *
  * Author: Andreas Büsching  <crunchy@tzi.de>
  *
- * $Id: mpiosh.h,v 1.4 2002/09/14 09:55:31 crunchy Exp $
+ * $Id: mpiosh.h,v 1.5 2002/09/14 11:19:30 crunchy Exp $
  *
  * Copyright (C) 2002 Andreas Büsching <crunchy@tzi.de>
  *
@@ -51,8 +51,9 @@ int mpiosh_readline_cancel(void);
 /* helper functions */
 void mpiosh_init(void);
 mpiosh_cmd_t *mpiosh_command_find(char *line);
-char **mpiosh_command_split(char *line);
+char **mpiosh_command_split_line(char *line);
 char **mpiosh_command_get_args(char *line);
+void mpiosh_command_regex_fix(char *argv[]);
 void mpiosh_command_free_args(char **args);
 
 /* global structures */