aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--INSTALL131
-rwxr-xr-xconfig.guess597
-rwxr-xr-xconfig.sub349
-rwxr-xr-xinstall-sh487
-rw-r--r--ltmain.sh2831
-rwxr-xr-xmissing58
-rwxr-xr-xmkinstalldirs156
7 files changed, 3216 insertions, 1393 deletions
diff --git a/INSTALL b/INSTALL
index b42a17a..54caf7c 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,3 +1,9 @@
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
@@ -8,20 +14,27 @@ various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
The simplest way to compile this package is:
@@ -55,14 +68,16 @@ Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
@@ -75,11 +90,11 @@ directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
@@ -122,22 +137,32 @@ you can use the `configure' options `--x-includes=DIR' and
Specifying the System Type
==========================
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
- If you are building compiler tools for cross-compiling, you can also
+ If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
@@ -150,20 +175,44 @@ default values for variables like `CC', `cache_file', and `prefix'.
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Operation Controls
+Defining Variables
==================
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
`configure' recognizes the following options to control how it
operates.
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
`--help'
+`-h'
Print a summary of the options to `configure', and exit.
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
`--quiet'
`--silent'
`-q'
@@ -175,8 +224,6 @@ operates.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
-`configure' also accepts some other, not widely useful, options.
diff --git a/config.guess b/config.guess
index 1e2f91f..0773d0f 100755
--- a/config.guess
+++ b/config.guess
@@ -1,9 +1,9 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-timestamp='2001-08-23'
+timestamp='2004-03-03'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -24,8 +24,9 @@ timestamp='2001-08-23'
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Written by Per Bothner <bothner@cygnus.com>.
-# Please send patches to <config-patches@gnu.org>.
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
@@ -87,30 +88,42 @@ if test $# != 0; then
exit 1
fi
+trap 'exit 1' 1 2 15
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
-# CC_FOR_BUILD -- compiler used by this script.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int dummy(){}" > $dummy.c ;
- for c in cc gcc c89 ; do
- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
- if test $? = 0 ; then
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
- rm -f $dummy.c $dummy.o $dummy.rel ;
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found ;
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac'
+esac ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
@@ -127,29 +140,30 @@ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
- # Netbsd (nbsd) targets should (where applicable) match one or
+ # NetBSD (nbsd) targets should (where applicable) match one or
# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
- # Determine the machine/vendor (is the vendor relevant).
- case "${UNAME_MACHINE}" in
- amiga) machine=m68k-unknown ;;
- arm32) machine=arm-unknown ;;
- atari*) machine=m68k-atari ;;
- sun3*) machine=m68k-sun ;;
- mac68k) machine=m68k-apple ;;
- macppc) machine=powerpc-apple ;;
- hp3[0-9][05]) machine=m68k-hp ;;
- ibmrt|romp-ibm) machine=romp-ibm ;;
- *) machine=${UNAME_MACHINE}-unknown ;;
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently, or will in the future.
- case "${UNAME_MACHINE}" in
- i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep __ELF__ >/dev/null
@@ -166,74 +180,135 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
;;
esac
# The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
exit 0 ;;
+ amd64:OpenBSD:*:*)
+ echo x86_64-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ cats:OpenBSD:*:*)
+ echo arm-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pegasos:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mipseb-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:MirBSD:*:*)
+ echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit 0 ;;
alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
+ case $UNAME_RELEASE in
+ *4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `./$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha*:OpenVMS:*:*)
+ echo alpha-hp-vms
exit 0 ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
@@ -247,33 +322,18 @@ EOF
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
exit 0;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
exit 0 ;;
- arc64:OpenBSD:*:*)
- echo mips64el-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hkmips:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
exit 0 ;;
*:OS/390:*:*)
echo i370-ibm-openedition
exit 0 ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
@@ -291,6 +351,13 @@ EOF
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
exit 0 ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit 0 ;;
+ DRS?6000:UNIX_SV:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7 && exit 0 ;;
+ esac ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
@@ -319,7 +386,7 @@ EOF
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
@@ -333,12 +400,6 @@ EOF
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit 0 ;;
- sparc*:NetBSD:*)
- echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
- exit 0 ;;
- atari*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
@@ -365,17 +426,8 @@ EOF
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit 0 ;;
- sun3*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
@@ -393,6 +445,7 @@ EOF
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
@@ -414,16 +467,20 @@ EOF
exit (-1);
}
EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
+ $CC_FOR_BUILD -o $dummy $dummy.c \
+ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && exit 0
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
exit 0 ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit 0 ;;
@@ -484,6 +541,7 @@ EOF
exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#include <sys/systemcfg.h>
@@ -495,9 +553,7 @@ EOF
exit(0);
}
EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
@@ -506,7 +562,7 @@ EOF
fi
exit 0 ;;
*:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
@@ -546,10 +602,8 @@ EOF
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
- case "${HPUX_REV}" in
- 11.[0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case "${sc_cpu_version}" in
523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
@@ -558,12 +612,13 @@ EOF
case "${sc_kernel_bits}" in
32) HP_ARCH="hppa2.0n" ;;
64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
esac ;;
esac
- fi ;;
- esac
- if [ "${HP_ARCH}" = "" ]; then
- sed 's/^ //' << EOF >$dummy.c
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
#define _HPUX_SOURCE
#include <stdlib.h>
@@ -596,12 +651,21 @@ EOF
exit (0);
}
EOF
- eval $set_cc_for_build
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy
- fi ;;
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ # avoid double evaluation of $set_cc_for_build
+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
ia64:HP-UX:*:*)
@@ -609,6 +673,7 @@ EOF
echo ia64-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#include <unistd.h>
int
@@ -634,9 +699,7 @@ EOF
exit (0);
}
EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
echo unknown-hitachi-hiuxwe2
exit 0 ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
@@ -664,9 +727,6 @@ EOF
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
exit 0 ;;
- hppa*:OpenBSD:*:*)
- echo hppa-unknown-openbsd
- exit 0 ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
exit 0 ;;
@@ -685,9 +745,6 @@ EOF
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
@@ -700,26 +757,25 @@ EOF
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
CRAY*T3E:*:*:*)
echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
+ *:UNICOS/mp:*:*)
+ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -731,10 +787,21 @@ EOF
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Determine whether the default compiler uses glibc.
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #if __GLIBC__ >= 2
+ LIBC=gnu
+ #else
+ LIBC=
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
+ # FreeBSD's kernel, but not the complete OS.
+ case ${LIBC} in gnu) kernel_only='k' ;; esac
+ echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
@@ -745,11 +812,17 @@ EOF
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit 0 ;;
+ x86:Interix*:[34]*)
+ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+ exit 0 ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit 0 ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
+ echo i586-pc-interix
exit 0 ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
@@ -761,25 +834,65 @@ EOF
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
+ # the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit 0 ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit 0 ;;
arm*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit 0 ;;
ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
mips:Linux:*:*)
- case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
- big) echo mips-unknown-linux-gnu && exit 0 ;;
- little) echo mipsel-unknown-linux-gnu && exit 0 ;;
- esac
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips
+ #undef mipsel
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mipsel
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
@@ -815,6 +928,9 @@ EOF
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
exit 0 ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
sh*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
@@ -828,7 +944,8 @@ EOF
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
# problems with other programs or directories called `ld' in the path.
- ld_supported_targets=`cd /; ld --help 2>&1 \
+ # Set LC_ALL=C to ensure ld outputs messages in English.
+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
| sed -ne '/supported targets:/!d
s/[ ][ ]*/ /g
s/.*supported targets: *//
@@ -840,7 +957,7 @@ EOF
;;
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
+ exit 0 ;;
coff-i386)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
exit 0 ;;
@@ -851,33 +968,32 @@ EOF
exit 0 ;;
esac
# Determine whether the default compiler is a.out or elf
- cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-# if __GLIBC__ >= 2
- printf ("%s-pc-linux-gnu\n", argv[1]);
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-#else
- printf ("%s-pc-linux-gnuaout\n", argv[1]);
-#endif
- return 0;
-}
-EOF
eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #ifdef __ELF__
+ # ifdef __GLIBC__
+ # if __GLIBC__ >= 2
+ LIBC=gnu
+ # else
+ LIBC=gnulibc1
+ # endif
+ # else
+ LIBC=gnulibc1
+ # endif
+ #else
+ #ifdef __INTEL_COMPILER
+ LIBC=gnu
+ #else
+ LIBC=gnuaout
+ #endif
+ #endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
;;
i*86:DYNIX/ptx:4*:*)
@@ -894,6 +1010,26 @@ EOF
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
exit 0 ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit 0 ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -915,22 +1051,19 @@ EOF
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
@@ -954,9 +1087,15 @@ EOF
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit 0 ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -973,9 +1112,6 @@ EOF
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
@@ -1047,6 +1183,9 @@ EOF
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
exit 0 ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
@@ -1054,18 +1193,24 @@ EOF
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
*:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
+ case `uname -p` in
+ *86) UNAME_PROCESSOR=i686 ;;
+ powerpc) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
exit 0 ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
- if test "${UNAME_MACHINE}" = "x86pc"; then
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
exit 0 ;;
*:QNX:*:4*)
echo i386-pc-qnx
exit 0 ;;
- NSR-[KW]:NONSTOP_KERNEL:*:*)
+ NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
exit 0 ;;
*:NonStop-UX:*:*)
@@ -1088,11 +1233,6 @@ EOF
fi
echo ${UNAME_MACHINE}-unknown-plan9
exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
exit 0 ;;
@@ -1111,17 +1251,18 @@ EOF
*:ITS:*:*)
echo pdp10-unknown-its
exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+eval $set_cc_for_build
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
@@ -1236,9 +1377,7 @@ main ()
}
EOF
-eval $set_cc_for_build
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
# Apollos put the system type in the environment.
diff --git a/config.sub b/config.sub
index ff13f7a..264f820 100755
--- a/config.sub
+++ b/config.sub
@@ -1,9 +1,9 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-timestamp='2001-08-23'
+timestamp='2004-02-23'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -29,7 +29,8 @@ timestamp='2001-08-23'
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -117,7 +118,8 @@ esac
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+ kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -226,31 +228,46 @@ case $basic_machine in
1750a | 580 \
| a29k \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| c4x | clipper \
- | d10v | d30v | dsp16xx \
- | fr30 \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
| m32r | m68000 | m68k | m88k | mcore \
- | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el | mips64vr4300 \
- | mips64vr4300el | mips64vr5000 | mips64vr5000el \
- | mipsbe | mipsel | mipsle | mipstx39 | mipstx39el \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64vr | mips64vrel \
+ | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | msp430 \
| ns16k | ns32k \
- | openrisc \
+ | openrisc | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | s390 | s390x \
- | sh | sh[34] | sh[34]eb | shbe | shle \
- | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
- | stormy16 | strongarm \
- | tahoe | thumb | tic80 | tron \
- | v850 \
+ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+ | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
| we32k \
- | x86 | xscale \
+ | x86 | xscale | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
@@ -277,38 +294,56 @@ case $basic_machine in
580-* \
| a29k-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alphapca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armv*-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
| bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c54x-* \
- | clipper-* | cray2-* | cydra-* \
- | d10v-* | d30v-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fr30-* | fx80-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
| m32r-* \
- | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
- | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
- | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipsel-* \
- | mipsle-* | mipstx39-* | mipstx39el-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | msp430-* \
+ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | s390-* | s390x-* \
- | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
- | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
- | v850-* | vax-* \
+ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+ | xtensa-* \
| ymp-* \
| z8k-*)
;;
@@ -328,6 +363,9 @@ case $basic_machine in
basic_machine=a29k-amd
os=-udi
;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
@@ -342,6 +380,12 @@ case $basic_machine in
basic_machine=a29k-none
os=-bsd
;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
amdahl)
basic_machine=580-amdahl
os=-sysv
@@ -373,6 +417,10 @@ case $basic_machine in
basic_machine=ns32k-sequent
os=-dynix
;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
@@ -393,17 +441,13 @@ case $basic_machine in
basic_machine=c38-convex
os=-bsd
;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
+ cray | j90)
+ basic_machine=j90-cray
os=-unicos
;;
- [cjt]90)
- basic_machine=${basic_machine}-cray
- os=-unicos
+ cr16c)
+ basic_machine=cr16c-unknown
+ os=-elf
;;
crds | unos)
basic_machine=m68k-crds
@@ -411,12 +455,24 @@ case $basic_machine in
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
@@ -597,14 +653,6 @@ case $basic_machine in
basic_machine=m68k-atari
os=-mint
;;
- mipsel*-linux*)
- basic_machine=mipsel-unknown
- os=-linux-gnu
- ;;
- mips*-linux*)
- basic_machine=mips-unknown
- os=-linux-gnu
- ;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
@@ -619,6 +667,10 @@ case $basic_machine in
basic_machine=m68k-rom68k
os=-coff
;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
@@ -691,6 +743,10 @@ case $basic_machine in
np1)
basic_machine=np1-gould
;;
+ nv1)
+ basic_machine=nv1-cray
+ os=-unicosmp
+ ;;
nsr-tandem)
basic_machine=nsr-tandem
;;
@@ -698,6 +754,14 @@ case $basic_machine in
basic_machine=hppa1.1-oki
os=-proelf
;;
+ or32 | or32-*)
+ basic_machine=or32-unknown
+ os=-coff
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
@@ -720,49 +784,55 @@ case $basic_machine in
pbb)
basic_machine=m68k-tti
;;
- pc532 | pc532-*)
+ pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
- pentium | p5 | k5 | k6 | nexgen)
+ pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
- pentiumpro | p6 | 6x86 | athlon)
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
basic_machine=i686-pc
;;
- pentiumii | pentium2)
+ pentiumii | pentium2 | pentiumiii | pentium3)
basic_machine=i686-pc
;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-*)
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- pentiumii-* | pentium2-*)
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
- ;;
+ ;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
- ;;
+ ;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
- ;;
+ ;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
- ;;
+ ;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
@@ -783,10 +853,26 @@ case $basic_machine in
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
sa29200)
basic_machine=a29k-amd
os=-udi
;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
sequent)
basic_machine=i386-sequent
;;
@@ -794,7 +880,10 @@ case $basic_machine in
basic_machine=sh-hitachi
os=-hms
;;
- sparclite-wrs)
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
@@ -861,22 +950,42 @@ case $basic_machine in
os=-dynix
;;
t3e)
- basic_machine=t3e-cray
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
os=-unicos
;;
tic54x | c54x*)
basic_machine=tic54x-unknown
os=-coff
;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
tower | tower-32)
basic_machine=m68k-ncr
;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
udi29k)
basic_machine=a29k-amd
os=-udi
@@ -898,8 +1007,8 @@ case $basic_machine in
os=-vms
;;
vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
+ basic_machine=f301-fujitsu
+ ;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
@@ -920,17 +1029,13 @@ case $basic_machine in
basic_machine=hppa1.1-winbond
os=-proelf
;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
+ xps | xps100)
+ basic_machine=xps100-honeywell
;;
- xmp)
- basic_machine=xmp-cray
+ ymp)
+ basic_machine=ymp-cray
os=-unicos
;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
z8k-*-coff)
basic_machine=z8k-unknown
os=-sim
@@ -951,13 +1056,6 @@ case $basic_machine in
op60c)
basic_machine=hppa1.1-oki
;;
- mips)
- if [ x$os = x-linux-gnu ]; then
- basic_machine=mips-unknown
- else
- basic_machine=mips-mips
- fi
- ;;
romp)
basic_machine=romp-ibm
;;
@@ -977,13 +1075,16 @@ case $basic_machine in
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh3eb | sh4eb)
+ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
sparc | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
- cydra)
+ cydra)
basic_machine=cydra-cydrome
;;
orion)
@@ -998,10 +1099,6 @@ case $basic_machine in
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
- c4x*)
- basic_machine=c4x-none
- os=-coff
- ;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
;;
@@ -1057,17 +1154,20 @@ case $os in
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos*)
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1079,8 +1179,10 @@ case $os in
;;
esac
;;
+ -nto-qnx*)
+ ;;
-nto*)
- os=-nto-qnx
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
@@ -1089,6 +1191,9 @@ case $os in
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
@@ -1101,6 +1206,9 @@ case $os in
-opened*)
os=-openedition
;;
+ -os400*)
+ os=-os400
+ ;;
-wince*)
os=-wince
;;
@@ -1119,14 +1227,23 @@ case $os in
-acis*)
os=-aos
;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
-386bsd)
os=-bsd
;;
-ctix* | -uts*)
os=-sysv
;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
-ns2 )
- os=-nextstep2
+ os=-nextstep2
;;
-nsk*)
os=-nsk
@@ -1138,6 +1255,9 @@ case $os in
-sinix*)
os=-sysv4
;;
+ -tpf*)
+ os=-tpf
+ ;;
-triton*)
os=-sysv3
;;
@@ -1165,8 +1285,14 @@ case $os in
-xenix)
os=-xenix
;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
;;
-none)
;;
@@ -1199,10 +1325,14 @@ case $basic_machine in
arm*-semi)
os=-aout
;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
pdp10-*)
os=-tops20
;;
- pdp11-*)
+ pdp11-*)
os=-none
;;
*-dec | vax-*)
@@ -1229,6 +1359,9 @@ case $basic_machine in
mips*-*)
os=-elf
;;
+ or32-*)
+ os=-coff
+ ;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
@@ -1292,19 +1425,19 @@ case $basic_machine in
*-next)
os=-nextstep3
;;
- *-gould)
+ *-gould)
os=-sysv
;;
- *-highlevel)
+ *-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
- *-sgi)
+ *-sgi)
os=-irix
;;
- *-siemens)
+ *-siemens)
os=-sysv4
;;
*-masscomp)
@@ -1373,10 +1506,16 @@ case $basic_machine in
-mvs* | -opened*)
vendor=ibm
;;
+ -os400*)
+ vendor=ibm
+ ;;
-ptx*)
vendor=sequent
;;
- -vxsim* | -vxworks*)
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
-aux*)
diff --git a/install-sh b/install-sh
index e9de238..77bc381 100755
--- a/install-sh
+++ b/install-sh
@@ -1,19 +1,38 @@
#!/bin/sh
-#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2004-02-15.20
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
@@ -23,13 +42,11 @@
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
-
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
@@ -41,211 +58,259 @@ stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=""
-transform_arg=""
+transformbasename=
+transform_arg=
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
+src=
+dst=
+dir_arg=
+
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 -d DIRECTORIES...
+
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
+
+Options:
+-b=TRANSFORMBASENAME
+-c copy source (using $cpprog) instead of moving (using $mvprog).
+-d create directories instead of installing files.
+-g GROUP $chgrp installed files to GROUP.
+-m MODE $chmod installed files to MODE.
+-o USER $chown installed files to USER.
+-s strip installed files (using $stripprog).
+-t=TRANSFORM
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit 0;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit 0;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ test -n "$dir_arg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
done
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
fi
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ instcmd=:
+ chmodcmd=
+ else
+ instcmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
- pathcomp="${pathcomp}/"
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp" || lasterr=$?
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $instcmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ # If we're going to rename the final executable, determine the name now.
+ if test -z "$transformarg"; then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename \
+ | sed $transformarg`$transformbasename
+ fi
+
+ # don't allow the sed command to completely eliminate the filename.
+ test -z "$dstfile" && dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Move or copy the file name to the temp name
+ $doit $instcmd "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $instcmd $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now remove or move aside any old file at destination location. We
+ # try this two ways since rm can't unlink itself on some systems and
+ # the destination file might be busy for other reasons. In this case,
+ # the final cleanup might fail but the new file should still install
+ # successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ fi || { (exit 1); exit; }
done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-exit 0
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/ltmain.sh b/ltmain.sh
index 4fd5fa7..22181cb 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
@@ -48,15 +48,18 @@ EOF
exit 0
fi
+# define SED for historic ltconfig's generated by Libtool 1.3
+test -z "$SED" && SED=sed
+
# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
+progname=`$echo "$0" | ${SED} 's%^.*/%%'`
modename="$progname"
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.4.1
-TIMESTAMP=" (1.922.2.34 2001/09/03 01:22:13)"
+VERSION=1.5.2
+TIMESTAMP=" (1.1220.2.60 2004/01/25 12:25:08)"
default_mode=
help="Try \`$progname --help' for more information."
@@ -67,10 +70,19 @@ rm="rm -f"
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
+# test EBCDIC or ASCII
+case `echo A|tr A '\301'` in
+ A) # EBCDIC based system
+ SP2NL="tr '\100' '\n'"
+ NL2SP="tr '\r\n' '\100\100'"
+ ;;
+ *) # Assume ASCII based system
+ SP2NL="tr '\040' '\012'"
+ NL2SP="tr '\015\012' '\040\040'"
+ ;;
+esac
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
@@ -84,9 +96,13 @@ if test "${LANG+set}" = set; then
save_LANG="$LANG"; LANG=C; export LANG
fi
+# Make sure IFS has a sensible default
+: ${IFS="
+"}
+
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$modename: not configured to build any kind of library" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ $echo "$modename: not configured to build any kind of library" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit 1
fi
@@ -102,8 +118,51 @@ execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+win32_libid () {
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+ grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 | \
+ sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
+ if test "X$win32_nmres" = "Ximport" ; then
+ win32_libid_type="x86 archive import"
+ else
+ win32_libid_type="x86 archive static"
+ fi
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $echo $win32_libid_type
+}
+
+# End of Shell function definitions
+#####################################
+
# Parse our command line options once, thoroughly.
-while test $# -gt 0
+while test "$#" -gt 0
do
arg="$1"
shift
@@ -119,6 +178,34 @@ do
execute_dlfiles)
execute_dlfiles="$execute_dlfiles $arg"
;;
+ tag)
+ tagname="$arg"
+ preserve_args="${preserve_args}=$arg"
+
+ # Check whether tagname contains only valid characters
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ $echo "$progname: invalid tag name: $tagname" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case $tagname in
+ CC)
+ # Don't test for the "default" C tag, as we know, it's there, but
+ # not specially marked.
+ ;;
+ *)
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+ taglist="$taglist $tagname"
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+ else
+ $echo "$progname: ignoring unknown tag $tagname" 1>&2
+ fi
+ ;;
+ esac
+ ;;
*)
eval "$prev=\$arg"
;;
@@ -136,18 +223,27 @@ do
;;
--version)
- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo
+ $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions. There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
exit 0
;;
--config)
- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+ done
exit 0
;;
--debug)
- echo "$progname: enabling shell trace mode"
+ $echo "$progname: enabling shell trace mode"
set -x
+ preserve_args="$preserve_args $arg"
;;
--dry-run | -n)
@@ -155,16 +251,16 @@ do
;;
--features)
- echo "host: $host"
+ $echo "host: $host"
if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
+ $echo "enable shared libraries"
else
- echo "disable shared libraries"
+ $echo "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
- echo "enable static libraries"
+ $echo "enable static libraries"
else
- echo "disable static libraries"
+ $echo "disable static libraries"
fi
exit 0
;;
@@ -178,6 +274,15 @@ do
--quiet | --silent)
show=:
+ preserve_args="$preserve_args $arg"
+ ;;
+
+ --tag) prevopt="--tag" prev=tag ;;
+ --tag=*)
+ set tag "$optarg" ${1+"$@"}
+ shift
+ prev=tag
+ preserve_args="$preserve_args --tag"
;;
-dlopen)
@@ -213,8 +318,10 @@ if test -z "$show_help"; then
# Infer the operation mode.
if test -z "$mode"; then
+ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+ $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
case $nonopt in
- *cc | *++ | gcc* | *-gcc*)
+ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
for arg
do
@@ -269,158 +376,124 @@ if test -z "$show_help"; then
modename="$modename: compile"
# Get the compilation command and the source file.
base_compile=
- prev=
- lastarg=
- srcfile="$nonopt"
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
- user_target=no
for arg
do
- case $prev in
- "") ;;
- xcompiler)
- # Aesthetically quote the previous argument.
- prev=
- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
- case $arg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
+ case "$arg_mode" in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
+ target )
+ libobj="$arg"
+ arg_mode=normal
continue
;;
- esac
- # Accept any command-line options.
- case $arg in
- -o)
- if test "$user_target" != "no"; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit 1
- fi
- user_target=next
- ;;
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ if test -n "$libobj" ; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+ exit 1
+ fi
+ arg_mode=target
+ continue
+ ;;
- -static)
- build_old_libs=yes
- continue
- ;;
+ -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
+ continue
+ ;;
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
- for arg in $args; do
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ lastarg="$lastarg $arg"
+ done
IFS="$save_ifs"
+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
+ # Add the arguments to base_compile.
base_compile="$base_compile $lastarg"
- fi
- continue
- ;;
- esac
+ continue
+ ;;
- case $user_target in
- next)
- # The next one is the -o target name
- user_target=yes
- continue
- ;;
- yes)
- # We got the output file
- user_target=set
- libobj="$arg"
- continue
+ * )
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
;;
- esac
-
- # Accept the current argument as the source file.
- lastarg="$srcfile"
- srcfile="$arg"
+ esac # case $arg_mode
# Aesthetically quote the previous argument.
-
- # Backslashify any backslashes, double quotes, and dollar signs.
- # These are the only characters that are still specially
- # interpreted inside of double-quoted scrings.
lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+ case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
- case $lastarg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
esac
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- done
+ base_compile="$base_compile $lastarg"
+ done # for arg
- case $user_target in
- set)
- ;;
- no)
- # Get the name of the library object.
- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ case $arg_mode in
+ arg)
+ $echo "$modename: you must specify an argument for -Xcompile"
+ exit 1
;;
- *)
+ target)
$echo "$modename: you must specify a target with \`-o'" 1>&2
exit 1
;;
+ *)
+ # Get the name of the library object.
+ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSfmso]'
+ xform='[cCFSifmso]'
case $libobj in
*.ada) xform=ada ;;
*.adb) xform=adb ;;
@@ -428,10 +501,13 @@ if test -z "$show_help"; then
*.asm) xform=asm ;;
*.c++) xform=c++ ;;
*.cc) xform=cc ;;
+ *.ii) xform=ii ;;
+ *.class) xform=class ;;
*.cpp) xform=cpp ;;
*.cxx) xform=cxx ;;
*.f90) xform=f90 ;;
*.for) xform=for ;;
+ *.java) xform=java ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -444,6 +520,75 @@ if test -z "$show_help"; then
;;
esac
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+ # Only attempt this if the compiler in the base compile
+ # command doesn't match the default compiler.
+ if test -n "$available_tags" && test -z "$tagname"; then
+ case $base_compile in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ case "$base_compile " in
+ "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ $echo "$modename: unable to infer tagged configuration"
+ $echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit 1
+# else
+# $echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+
+ for arg in $later; do
+ case $arg in
+ -static)
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+ xdir=
+ else
+ xdir=$xdir/
+ fi
+ lobj=${xdir}$objdir/$objname
+
if test -z "$base_compile"; then
$echo "$modename: you must specify a compilation command" 1>&2
$echo "$help" 1>&2
@@ -452,9 +597,9 @@ if test -z "$show_help"; then
# Delete any leftover library objects.
if test "$build_old_libs" = yes; then
- removelist="$obj $libobj"
+ removelist="$obj $lobj $libobj ${libobj}T"
else
- removelist="$libobj"
+ removelist="$lobj $libobj ${libobj}T"
fi
$run $rm $removelist
@@ -479,6 +624,7 @@ if test -z "$show_help"; then
removelist="$removelist $output_obj $lockfile"
trap "$run $rm $removelist; exit 1" 1 2 15
else
+ output_obj=
need_locks=no
lockfile=
fi
@@ -492,7 +638,7 @@ if test -z "$show_help"; then
done
elif test "$need_locks" = warn; then
if test -f "$lockfile"; then
- echo "\
+ $echo "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
@@ -506,56 +652,55 @@ compiler."
$run $rm $removelist
exit 1
fi
- echo $srcfile > "$lockfile"
+ $echo $srcfile > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ $run $rm "$libobj" "${libobj}T"
+
+ # Create a libtool object file (analogous to a ".la" file),
+ # but don't create it if we're doing a dry run.
+ test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
# Only build a PIC object if we are building libtool libraries.
if test "$build_libtool_libs" = yes; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- # All platforms use -DPIC, to notify preprocessed assembler code.
- command="$base_compile $srcfile $pic_flag -DPIC"
+ command="$base_compile $srcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $srcfile"
fi
- if test "$build_old_libs" = yes; then
- lo_libobj="$libobj"
- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$libobj"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
- if test -d "$dir"; then
- $show "$rm $libobj"
- $run $rm $libobj
- else
- $show "$mkdir $dir"
- $run $mkdir $dir
- status=$?
- if test $status -ne 0 && test ! -d $dir; then
- exit $status
- fi
+ if test ! -d "${xdir}$objdir"; then
+ $show "$mkdir ${xdir}$objdir"
+ $run $mkdir ${xdir}$objdir
+ status=$?
+ if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
+ exit $status
fi
fi
- if test "$compiler_o_lo" = yes; then
- output_obj="$libobj"
- command="$command -o $output_obj"
- elif test "$compiler_c_o" = yes; then
- output_obj="$obj"
- command="$command -o $output_obj"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
fi
- $run $rm "$output_obj"
+ $run $rm "$lobj" "$output_obj"
+
$show "$command"
if $run eval "$command"; then :
else
@@ -564,8 +709,8 @@ compiler."
fi
if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
@@ -584,9 +729,9 @@ compiler."
fi
# Just move the object if needed, then go on to compile the next one
- if test x"$output_obj" != x"$libobj"; then
- $show "$mv $output_obj $libobj"
- if $run $mv $output_obj $libobj; then :
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ $show "$mv $output_obj $lobj"
+ if $run $mv $output_obj $lobj; then :
else
error=$?
$run $rm $removelist
@@ -594,48 +739,23 @@ compiler."
fi
fi
- # If we have no pic_flag, then copy the object into place and finish.
- if (test -z "$pic_flag" || test "$pic_mode" != default) &&
- test "$build_old_libs" = yes; then
- # Rename the .lo from within objdir to obj
- if test -f $obj; then
- $show $rm $obj
- $run $rm $obj
- fi
+ # Append the name of the PIC object to the libtool object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
- $show "$mv $libobj $obj"
- if $run $mv $libobj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
+EOF
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
- # Now arrange that obj and lo_libobj become the same file
- $show "(cd $xdir && $LN_S $baseobj $libobj)"
- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
- exit 0
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
fi
+ else
+ # No PIC object so indicate it doesn't exist in the libtool
+ # object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
- # Allow error messages only from the first compilation.
- suppress_output=' >/dev/null 2>&1'
+EOF
fi
# Only build a position-dependent object if we build old libraries.
@@ -644,17 +764,15 @@ compiler."
# Don't build PIC code
command="$base_compile $srcfile"
else
- # All platforms use -DPIC, to notify preprocessed assembler code.
- command="$base_compile $srcfile $pic_flag -DPIC"
+ command="$base_compile $srcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
- output_obj="$obj"
fi
# Suppress compiler output if we already did a PIC compilation.
command="$command$suppress_output"
- $run $rm "$output_obj"
+ $run $rm "$obj" "$output_obj"
$show "$command"
if $run eval "$command"; then :
else
@@ -663,8 +781,8 @@ compiler."
fi
if test "$need_locks" = warn &&
- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
- echo "\
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
@@ -683,7 +801,7 @@ compiler."
fi
# Just move the object if needed
- if test x"$output_obj" != x"$obj"; then
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
$show "$mv $output_obj $obj"
if $run $mv $output_obj $obj; then :
else
@@ -693,23 +811,25 @@ compiler."
fi
fi
- # Create an invalid libtool object if no PIC, so that we do not
- # accidentally link it into a program.
- if test "$build_libtool_libs" != yes; then
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > \$libobj" || exit $?
- else
- # Move the .lo from within objdir
- $show "$mv $libobj $lo_libobj"
- if $run $mv $libobj $lo_libobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+ else
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
fi
+ $run $mv "${libobj}T" "${libobj}"
+
# Unlock the critical section if it was locked
if test "$need_locks" != no; then
$run $rm "$lockfile"
@@ -726,7 +846,7 @@ compiler."
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
- # flag for every libtool invokation.
+ # flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
@@ -741,6 +861,7 @@ compiler."
;;
esac
libtool_args="$nonopt"
+ base_compile="$nonopt $@"
compile_command="$nonopt"
finalize_command="$nonopt"
@@ -771,6 +892,8 @@ compiler."
module=no
no_install=no
objs=
+ non_pic_objects=
+ precious_files_regex=
prefer_static_libs=no
preload=no
prev=
@@ -782,6 +905,48 @@ compiler."
temp_rpath=
thread_safe=no
vinfo=
+ vinfo_number=no
+
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+ # Only attempt this if the compiler in the base link
+ # command doesn't match the default compiler.
+ if test -n "$available_tags" && test -z "$tagname"; then
+ case $base_compile in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ case $base_compile in
+ "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
+ # The compiler in $compile_command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ $echo "$modename: unable to infer tagged configuration"
+ $echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit 1
+# else
+# $echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
# We need to know -static, to get the right output filenames.
for arg
@@ -812,7 +977,7 @@ compiler."
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
- while test $# -gt 0; do
+ while test "$#" -gt 0; do
arg="$1"
shift
case $arg in
@@ -887,16 +1052,128 @@ compiler."
prev=
continue
;;
- inst_prefix)
+ inst_prefix)
inst_prefix_dir="$arg"
prev=
continue
;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
release)
release="-$arg"
prev=
continue
;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat $save_arg`
+ do
+# moreargs="$moreargs $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ # If there is no directory component, then add one.
+ case $arg in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
+
+ if test -z "$pic_object" || \
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ libobjs="$libobjs $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+ exit 1
+ else
+ # Dry-run case.
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+ libobjs="$libobjs $pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ fi
+ done
+ else
+ $echo "$modename: link input file \`$save_arg' does not exist"
+ exit 1
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
rpath | xrpath)
# We need an absolute path.
case $arg in
@@ -935,13 +1212,21 @@ compiler."
finalize_command="$finalize_command $wl$qarg"
continue
;;
+ xcclinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ compile_command="$compile_command $qarg"
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
- fi # test -n $prev
+ fi # test -n "$prev"
prevarg="$arg"
@@ -1002,7 +1287,7 @@ compiler."
# so, if we see these flags be careful not to treat them like -L
-L[A-Z][A-Z]*:*)
case $with_gcc/$host in
- no/*-*-irix*)
+ no/*-*-irix* | /*-*-irix*)
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
;;
@@ -1053,29 +1338,65 @@ compiler."
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd*)
+ *-*-openbsd* | *-*-freebsd*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
- esac
- fi
- if test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd*)
- # Do not include libc_r directly, use -pthread flag.
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ deplibs="$deplibs -framework System"
continue
- ;;
esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
fi
deplibs="$deplibs $arg"
continue
;;
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
-module)
module=yes
continue
;;
+ # gcc -m* arguments should be passed to the linker via $compiler_flags
+ # in order to pass architecture information to the linker
+ # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
+ # but this is not reliable with gcc because gcc may use -mfoo to
+ # select a different linker, different libraries, etc, while
+ # -Wl,-mfoo simply passes -mfoo to the linker.
+ -m*)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ if test "$with_gcc" = "yes" ; then
+ compiler_flags="$compiler_flags $arg"
+ fi
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
-no-fast-install)
fast_install=no
continue
@@ -1100,8 +1421,18 @@ compiler."
continue
;;
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
-o) prev=output ;;
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
-release)
prev=release
continue
@@ -1152,11 +1483,16 @@ compiler."
prev=vinfo
continue
;;
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
-Wc,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
@@ -1174,7 +1510,7 @@ compiler."
-Wl,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
@@ -1200,6 +1536,11 @@ compiler."
continue
;;
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
# Some other compiler flag.
-* | +*)
# Unknown arguments in both finalize_command and compile_command need
@@ -1212,29 +1553,101 @@ compiler."
esac
;;
- *.lo | *.$objext)
- # A library or standard object.
- if test "$prev" = dlfiles; then
- # This file was specified with -dlopen.
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $arg"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
+ *.$objext)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
- prev=
- else
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ # If there is no directory component, then add one.
case $arg in
- *.lo) libobjs="$libobjs $arg" ;;
- *) objs="$objs $arg" ;;
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
esac
+
+ if test -z "$pic_object" || \
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+ exit 1
+ fi
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ libobjs="$libobjs $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+ exit 1
+ else
+ # Dry-run case.
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+ libobjs="$libobjs $pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
fi
;;
@@ -1294,6 +1707,7 @@ compiler."
finalize_command="$finalize_command $arg"
fi
+ oldlibs=
# calculate the name of the file, without its directory
outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
libobjs_save="$libobjs"
@@ -1314,11 +1728,11 @@ compiler."
output_objdir="$output_objdir/$objdir"
fi
# Create the object directory.
- if test ! -d $output_objdir; then
+ if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
+ if test "$status" -ne 0 && test ! -d "$output_objdir"; then
exit $status
fi
fi
@@ -1336,7 +1750,17 @@ compiler."
*) linkmode=prog ;; # Anything else should be a program.
esac
+ case $host in
+ *cygwin* | *mingw* | *pw32*)
+ # don't eliminate duplcations in $postdeps and $predeps
+ duplicate_compiler_generated_deps=yes
+ ;;
+ *)
+ duplicate_compiler_generated_deps=$duplicate_deps
+ ;;
+ esac
specialdeplibs=
+
libs=
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
@@ -1356,7 +1780,7 @@ compiler."
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
- if test "X$duplicate_deps" = "Xyes" ; then
+ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
@@ -1398,25 +1822,39 @@ compiler."
;;
esac
for pass in $passes; do
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
if test "$linkmode" = prog; then
- # Determine which files to process
case $pass in
- dlopen)
- libs="$dlfiles"
- save_deplibs="$deplibs" # Collect dlpreopened libraries
- deplibs=
- ;;
+ dlopen) libs="$dlfiles" ;;
dlpreopen) libs="$dlprefiles" ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
for deplib in $libs; do
lib=
found=no
case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
-l*)
- if test "$linkmode" = oldlib && test "$linkmode" = obj; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
if test "$pass" = conv; then
@@ -1425,12 +1863,18 @@ compiler."
fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- # Search the libtool library
- lib="$searchdir/lib${name}.la"
- if test -f "$lib"; then
- found=yes
- break
- fi
+ for search_ext in .la $shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
done
if test "$found" != yes; then
# deplib doesn't seem to be a libtool library
@@ -1442,6 +1886,42 @@ compiler."
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
fi
continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if (${SED} -e '2q' $lib |
+ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ library_names=
+ old_library=
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
fi
;; # -l
-L*)
@@ -1466,7 +1946,7 @@ compiler."
fi
;;
*)
- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
;;
esac # linkmode
continue
@@ -1492,15 +1972,17 @@ compiler."
case $linkmode in
lib)
if test "$deplibs_check_method" != pass_all; then
- echo
- echo "*** Warning: This library needs some functionality provided by $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ $echo
+ $echo "*** Warning: Trying to link with static lib archive $deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because the file extensions .$libext of this argument makes me believe"
+ $echo "*** that it is just a static archive that I should not used here."
else
- echo
- echo "*** Warning: Linking the shared library $output against the"
- echo "*** static library $deplib is not portable!"
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the"
+ $echo "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
fi
continue
@@ -1517,14 +1999,18 @@ compiler."
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
fi
continue
;;
@@ -1533,14 +2019,14 @@ compiler."
continue
;;
esac # case $deplib
- if test $found = yes || test -f "$lib"; then :
+ if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib'" 1>&2
exit 1
fi
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
@@ -1556,8 +2042,9 @@ compiler."
library_names=
old_library=
# If the library was installed with an old release of libtool,
- # it will not redefine variable installed.
+ # it will not redefine variables installed, or shouldnotlink
installed=yes
+ shouldnotlink=no
# Read the .la file
case $lib in
@@ -1567,8 +2054,7 @@ compiler."
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
- # Add dl[pre]opened files of deplib
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
@@ -1601,6 +2087,7 @@ compiler."
continue
fi # $pass = conv
+
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
@@ -1619,8 +2106,10 @@ compiler."
fi
if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload.
- dlprefiles="$dlprefiles $lib"
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ dlprefiles="$dlprefiles $lib $dependency_libs"
else
newdlfiles="$newdlfiles $lib"
fi
@@ -1686,11 +2175,12 @@ compiler."
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
- deplibs="$lib $deplibs"
+ deplibs="$lib $deplibs" # used for prog,scan pass
fi
continue
fi
+
if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
@@ -1707,7 +2197,7 @@ compiler."
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
esac
# Need to link against all dependency_libs?
- if test $linkalldeplibs = yes; then
+ if test "$linkalldeplibs" = yes; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
@@ -1724,13 +2214,19 @@ compiler."
continue
fi # $linkmode = prog...
- link_static=no # Whether the deplib will be linked statically
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # Link against this shared library
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
- if test "$linkmode,$pass" = "prog,link" ||
- { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -1752,17 +2248,6 @@ compiler."
esac
;;
esac
- if test "$linkmode" = prog; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
- fi
fi # $linkmode,$pass = prog,link...
if test "$alldeplibs" = yes &&
@@ -1772,11 +2257,51 @@ compiler."
# We only need to search for static libraries
continue
fi
+ fi
+ link_static=no # Whether the deplib will be linked statically
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
fi
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some systems (darwin)
+ if test "$shouldnotlink" = yes && test "$pass" = link ; then
+ $echo
+ if test "$linkmode" = prog; then
+ $echo "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $echo "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $echo "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
@@ -1790,7 +2315,7 @@ compiler."
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin*)
+ *cygwin* | mingw*)
major=`expr $current - $age`
versuffix="-$major"
;;
@@ -1802,17 +2327,18 @@ compiler."
# Make a new name for the extract_expsyms_cmds to use
soroot="$soname"
- soname=`echo $soroot | sed -e 's/^.*\///'`
- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+ soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
$show "extracting exported symbol list from \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- eval cmds=\"$extract_expsyms_cmds\"
+ save_ifs="$IFS"; IFS='~'
+ cmds=$extract_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -1822,10 +2348,11 @@ compiler."
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
$show "generating import library for \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- eval cmds=\"$old_archive_from_expsyms_cmds\"
+ save_ifs="$IFS"; IFS='~'
+ cmds=$old_archive_from_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -1834,7 +2361,7 @@ compiler."
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
- fi # test -n $old_archive_from_expsyms_cmds
+ fi # test -n "$old_archive_from_expsyms_cmds"
if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
@@ -1845,6 +2372,22 @@ compiler."
immediate | unsupported)
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a module then we can not link against it, someone
+ # is ignoring the new warnings I added
+ if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
+ $echo "** Warning, lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $echo
+ $echo "** And there doesn't seem to be a static archive available"
+ $echo "** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
elif test "$hardcode_minus_L" = no; then
case $host in
*-*-sunos*) add_shlibpath="$dir" ;;
@@ -1863,6 +2406,14 @@ compiler."
add="$dir/$linklib"
elif test "$hardcode_minus_L" = yes; then
add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case "$libdir" in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
add_shlibpath="$dir"
@@ -1910,16 +2461,7 @@ compiler."
if test "$hardcode_direct" = yes; then
add="$libdir/$linklib"
elif test "$hardcode_minus_L" = yes; then
- # Try looking first in the location we're being installed to.
- add_dir=
- if test -n "$inst_prefix_dir"; then
- case "$libdir" in
- [\\/]*)
- add_dir="-L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add_dir="$add_dir -L$libdir"
+ add_dir="-L$libdir"
add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
@@ -1927,18 +2469,23 @@ compiler."
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
else
# We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
- add_dir=
if test -n "$inst_prefix_dir"; then
case "$libdir" in
- [\\/]*)
- add_dir="-L$inst_prefix_dir$libdir"
- ;;
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
esac
fi
- add_dir="$add_dir -L$libdir"
add="-l$name"
fi
@@ -1951,15 +2498,6 @@ compiler."
fi
fi
elif test "$linkmode" = prog; then
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
-
- # Try to link the static library
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
@@ -1979,20 +2517,21 @@ compiler."
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
- echo
- echo "*** Warning: This library needs some functionality provided by $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ $echo
+ $echo "*** Warning: This system can not link to static lib archive $lib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
- echo "*** Therefore, libtool will create a static module, that should work "
- echo "*** as long as the dlopening application is linked with the -dlopen flag."
+ $echo "*** But as you try to build a module library, libtool will still create "
+ $echo "*** a static module, that should work as long as the dlopening application"
+ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ $echo
+ $echo "*** However, this would only work if libtool was able to extract symbol"
+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $echo "*** not find such a program. So, this module is probably useless."
+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
@@ -2011,8 +2550,8 @@ compiler."
if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes || test $build_old_libs = yes ||
- test $link_static = yes; }; then
+ { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
@@ -2063,9 +2602,9 @@ compiler."
;;
esac
if grep "^installed=no" $deplib > /dev/null; then
- path="-L$absdir/$objdir"
+ path="$absdir/$objdir"
else
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit 1
@@ -2073,12 +2612,57 @@ compiler."
if test "$absdir" != "$libdir"; then
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
fi
- path="-L$absdir"
+ path="$absdir"
fi
+ depdepl=
+ case $host in
+ *-*-darwin*)
+ # we do not want to link against static libs, but need to link against shared
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$path/$depdepl" ; then
+ depdepl="$path/$depdepl"
+ fi
+ # do not add paths which are already there
+ case " $newlib_search_path " in
+ *" $path "*) ;;
+ *) newlib_search_path="$newlib_search_path $path";;
+ esac
+ fi
+ path=""
+ ;;
+ *)
+ path="-L$path"
+ ;;
+ esac
+
+ ;;
+ -l*)
+ case $host in
+ *-*-darwin*)
+ # Again, we only want to link against shared libraries
+ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+ for tmp in $newlib_search_path ; do
+ if test -f "$tmp/lib$tmp_libs.dylib" ; then
+ eval depdepl="$tmp/lib$tmp_libs.dylib"
+ break
+ fi
+ done
+ path=""
+ ;;
+ *) continue ;;
+ esac
;;
*) continue ;;
esac
case " $deplibs " in
+ *" $depdepl "*) ;;
+ *) deplibs="$deplibs $depdepl" ;;
+ esac
+ case " $deplibs " in
*" $path "*) ;;
*) deplibs="$deplibs $path" ;;
esac
@@ -2086,6 +2670,7 @@ compiler."
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
+ dependency_libs="$newdependency_libs"
if test "$pass" = dlpreopen; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
@@ -2093,7 +2678,6 @@ compiler."
done
fi
if test "$pass" != dlopen; then
- test "$pass" != scan && dependency_libs="$newdependency_libs"
if test "$pass" != conv; then
# Make sure lib_search_path contains only unique directories.
lib_search_path=
@@ -2116,9 +2700,30 @@ compiler."
eval tmp_libs=\"\$$var\"
new_libs=
for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
case $deplib in
-L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
*)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
case " $specialdeplibs " in
*" $deplib "*) new_libs="$deplib $new_libs" ;;
*)
@@ -2146,11 +2751,19 @@ compiler."
eval $var=\"$tmp_libs\"
done # for var
fi
- if test "$pass" = "conv" &&
- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
- libs="$deplibs" # reset libs
- deplibs=
- fi
+ # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ tmp_libs="$tmp_libs $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
done # for pass
if test "$linkmode" = prog; then
dlfiles="$newdlfiles"
@@ -2159,6 +2772,10 @@ compiler."
case $linkmode in
oldlib)
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ fi
+
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
fi
@@ -2172,7 +2789,7 @@ compiler."
fi
if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
fi
if test -n "$release"; then
@@ -2194,6 +2811,7 @@ compiler."
case $outputname in
lib*)
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval shared_ext=\"$shrext\"
eval libname=\"$libname_spec\"
;;
*)
@@ -2205,6 +2823,7 @@ compiler."
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ eval shared_ext=\"$shrext\"
eval libname=\"$libname_spec\"
else
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -2217,9 +2836,9 @@ compiler."
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
exit 1
else
- echo
- echo "*** Warning: Linking the shared library $output against the non-libtool"
- echo "*** objects $objs is not portable!"
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the non-libtool"
+ $echo "*** objects $objs is not portable!"
libobjs="$libobjs $objs"
fi
fi
@@ -2229,7 +2848,7 @@ compiler."
fi
set dummy $rpath
- if test $# -gt 2; then
+ if test "$#" -gt 2; then
$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
fi
install_libdir="$2"
@@ -2238,14 +2857,16 @@ compiler."
if test -z "$rpath"; then
if test "$build_libtool_libs" = yes; then
# Building a libtool convenience library.
- libext=al
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
build_libtool_libs=convenience
build_old_libs=yes
fi
if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
fi
if test -n "$release"; then
@@ -2254,7 +2875,7 @@ compiler."
else
# Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ save_ifs="$IFS"; IFS=':'
set dummy $vinfo 0 0 0
IFS="$save_ifs"
@@ -2264,9 +2885,46 @@ compiler."
exit 1
fi
- current="$2"
- revision="$3"
- age="$4"
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$2"
+ number_minor="$3"
+ number_revision="$4"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows)
+ current=`expr $number_major + $number_minor`
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ current=`expr $number_major + $number_minor - 1`
+ age="$number_minor"
+ revision="$number_minor"
+ ;;
+ esac
+ ;;
+ no)
+ current="$2"
+ revision="$3"
+ age="$4"
+ ;;
+ esac
# Check that each of the things are valid numbers.
case $current in
@@ -2296,7 +2954,7 @@ compiler."
;;
esac
- if test $age -gt $current; then
+ if test "$age" -gt "$current"; then
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit 1
@@ -2329,16 +2987,21 @@ compiler."
versuffix=".$current";
;;
- irix)
+ irix | nonstopux)
major=`expr $current - $age + 1`
- verstring="sgi$major.$revision"
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test $loop != 0; do
+ while test "$loop" -ne 0; do
iface=`expr $revision - $loop`
loop=`expr $loop - 1`
- verstring="sgi$major.$iface:$verstring"
+ verstring="$verstring_prefix$major.$iface:$verstring"
done
# Before this point, $major must not contain `.'.
@@ -2352,13 +3015,13 @@ compiler."
;;
osf)
- major=`expr $current - $age`
+ major=.`expr $current - $age`
versuffix=".$current.$age.$revision"
verstring="$current.$age.$revision"
# Add in all the interfaces that we are compatible with.
loop=$age
- while test $loop != 0; do
+ while test "$loop" -ne 0; do
iface=`expr $current - $loop`
loop=`expr $loop - 1`
verstring="$verstring:${iface}.0"
@@ -2382,7 +3045,7 @@ compiler."
*)
$echo "$modename: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit 1
;;
esac
@@ -2390,12 +3053,11 @@ compiler."
# Clear the version info if we defaulted, and they specified a release.
if test -z "$vinfo" && test -n "$release"; then
major=
- verstring="0.0"
case $version_type in
darwin)
# we can't check for "0.0" in archive_cmds due to quoting
# problems, so we reset it completely
- verstring=""
+ verstring=
;;
*)
verstring="0.0"
@@ -2429,9 +3091,28 @@ compiler."
fi
if test "$mode" != relink; then
- # Remove our outputs.
- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ if test -n "$removelist"; then
+ $show "${rm}r $removelist"
+ $run ${rm}r $removelist
+ fi
fi
# Now set the variables for building old libraries.
@@ -2444,9 +3125,9 @@ compiler."
# Eliminate all temporary directories.
for path in $notinst_path; do
- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+ deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
done
if test -n "$xrpath"; then
@@ -2459,7 +3140,7 @@ compiler."
*) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
@@ -2497,10 +3178,11 @@ compiler."
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd*)
+ *-*-openbsd* | *-*-freebsd*)
# Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
;;
- *)
+ *)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
deplibs="$deplibs -lc"
@@ -2529,7 +3211,7 @@ compiler."
# This might be a little naive. We might want to check
# whether the library exists or not. But this is on
# osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behaviour.
+ # implementing what was already the behavior.
newdeplibs=$deplibs
;;
test_compile)
@@ -2542,64 +3224,88 @@ compiler."
int main() { return 0; }
EOF
$rm conftest
- $CC -o conftest conftest.c $deplibs
- if test $? -eq 0 ; then
+ $LTCC -o conftest conftest.c $deplibs
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name="`expr $i : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ if test "$name" != "" && test "$name" -ne "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: dynamic linker does not accept needed library $i."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which I believe you do not have"
+ $echo "*** because a test_compile did reveal that the linker did not use it for"
+ $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
fi
else
newdeplibs="$newdeplibs $i"
fi
done
else
- # Error occured in the first compile. Let's try to salvage the situation:
- # Compile a seperate program for each library.
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
for i in $deplibs; do
name="`expr $i : '-l\(.*\)'`"
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $CC -o conftest conftest.c $i
+ $LTCC -o conftest conftest.c $i
# Did it work?
- if test $? -eq 0 ; then
+ if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: dynamic linker does not accept needed library $i."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because a test_compile did reveal that the linker did not use this one"
+ $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
fi
else
droppeddeps=yes
- echo
- echo "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
+ $echo
+ $echo "*** Warning! Library $i is needed by this library but I was not able to"
+ $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** library that it depends on before this library will be fully"
+ $echo "*** functional. Installing it before continuing would be even better."
fi
else
newdeplibs="$newdeplibs $i"
@@ -2613,11 +3319,20 @@ EOF
for a_deplib in $deplibs; do
name="`expr $a_deplib : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
+ if test "$name" != "" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null \
| grep " -> " >/dev/null; then
@@ -2630,28 +3345,36 @@ EOF
# but so what?
potlib="$potent_lib"
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | sed 10q \
- | egrep "$file_magic_regex" > /dev/null; then
+ | ${SED} 10q \
+ | $EGREP "$file_magic_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
- done
- done
+ done
+ done
+ fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ $echo
+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $echo "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $echo "*** with $libname and none of the candidates passed a file format test"
+ $echo "*** using a file magic. Last file checked: $potlib"
+ fi
fi
else
# Add a -L argument.
@@ -2666,26 +3389,44 @@ EOF
name="`expr $a_deplib : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- if eval echo \"$potent_lib\" 2>/dev/null \
- | sed 10q \
- | egrep "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval $echo \"$potent_lib\" 2>/dev/null \
+ | ${SED} 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
done
- done
+ fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ $echo
+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $echo "*** with $libname and none of the candidates passed a file format test"
+ $echo "*** using a regex pattern. Last file checked: $potlib"
+ fi
fi
else
# Add a -L argument.
@@ -2695,16 +3436,23 @@ EOF
;;
none | unknown | *)
newdeplibs=""
- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
- grep . >/dev/null; then
- echo
+ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+ -e 's/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+ done
+ fi
+ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
+ | grep . >/dev/null; then
+ $echo
if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
+ $echo "*** Warning: inter-library dependencies are not supported in this platform."
else
- echo "*** Warning: inter-library dependencies are not known to be supported."
+ $echo "*** Warning: inter-library dependencies are not known to be supported."
fi
- echo "*** All declared inter-library dependencies are being dropped."
+ $echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
fi
;;
@@ -2724,17 +3472,17 @@ EOF
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
- echo "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
+ $echo
+ $echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $echo "*** dependencies of module $libname. Therefore, libtool will create"
+ $echo "*** a static module, that should work as long as the dlopening"
+ $echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ $echo
+ $echo "*** However, this would only work if libtool was able to extract symbol"
+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $echo "*** not find such a program. So, this module is probably useless."
+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
@@ -2744,16 +3492,16 @@ EOF
build_libtool_libs=no
fi
else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
-
- if test $allow_undefined = no; then
- echo
- echo "*** Since this library must not contain undefined symbols,"
- echo "*** because either the platform does not support them or"
- echo "*** it was explicitly requested with -no-undefined,"
- echo "*** libtool will only create a static version of it."
+ $echo "*** The inter-library dependencies that have been dropped here will be"
+ $echo "*** automatically added whenever a program is linked with this library"
+ $echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ $echo
+ $echo "*** Since this library must not contain undefined symbols,"
+ $echo "*** because either the platform does not support them or"
+ $echo "*** it was explicitly requested with -no-undefined,"
+ $echo "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
@@ -2811,7 +3559,11 @@ EOF
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
libdir="$hardcode_libdirs"
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
@@ -2831,6 +3583,7 @@ EOF
fi
# Get the real and link names of the library.
+ eval shared_ext=\"$shrext\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
realname="$2"
@@ -2841,7 +3594,9 @@ EOF
else
soname="$realname"
fi
- test -z "$dlname" && dlname=$soname
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
lib="$output_objdir/$realname"
for link
@@ -2849,23 +3604,6 @@ EOF
linknames="$linknames $link"
done
- # Ensure that we have .o objects for linkers which dislike .lo
- # (e.g. aix) in case we are running --disable-static
- for obj in $libobjs; do
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
- if test ! -f $xdir/$oldobj; then
- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
- fi
- done
-
# Use standard objects if they are pic
test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
@@ -2875,17 +3613,26 @@ EOF
$show "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
- eval cmds=\"$export_symbols_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
+ eval cmd=\"$cmd\"
+ if len=`expr "X$cmd" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ $show "using reloadable object file for export list..."
+ skipped_export=:
+ fi
done
IFS="$save_ifs"
if test -n "$export_symbols_regex"; then
- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
$show "$mv \"${export_symbols}T\" \"$export_symbols\""
$run eval '$mv "${export_symbols}T" "$export_symbols"'
fi
@@ -2896,17 +3643,29 @@ EOF
$run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
fi
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -2922,16 +3681,42 @@ EOF
$show "${rm}r $xdir"
$run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
+ # We will extract separately just the conflicting names and we will no
+ # longer touch any unique names. It is faster to leave these extract
+ # automatically by $AR in one run.
$show "(cd $xdir && $AR x $xabs)"
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+ if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+ $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+ $AR t "$xabs" | sort | uniq -cd | while read -r count name
+ do
+ i=1
+ while test "$i" -le "$count"
+ do
+ # Put our $i before any first dot (extension)
+ # Never overwrite any file
+ name_to="$name"
+ while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+ do
+ name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+ done
+ $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+ $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+ i=`expr $i + 1`
+ done
+ done
+ fi
- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+ libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
fi
fi
@@ -2947,14 +3732,148 @@ EOF
fi
# Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
else
- eval cmds=\"$archive_cmds\"
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+
+ if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise.
+ $echo "creating reloadable object files..."
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ delfiles=
+ last_robj=
+ k=1
+ output=$output_objdir/$save_output-${k}.$objext
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+ if test "X$objlist" = X ||
+ { len=`expr "X$test_cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len"; }; then
+ objlist="$objlist $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ fi
+ last_robj=$output_objdir/$save_output-${k}.$objext
+ k=`expr $k + 1`
+ output=$output_objdir/$save_output-${k}.$objext
+ objlist=$obj
+ len=1
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+ if ${skipped_export-false}; then
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+ fi
+
+ # Set up a command to remove the reloadale object files
+ # after they are used.
+ i=0
+ while test "$i" -lt "$k"
+ do
+ i=`expr $i + 1`
+ delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ done
+
+ $echo "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+
+ # Append the command to remove the reloadable object files
+ # to the just-reset $cmds.
+ eval cmds=\"\$cmds~\$rm $delfiles\"
+ fi
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -3042,10 +3961,10 @@ EOF
gentop="$output_objdir/${obj}x"
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -3061,16 +3980,42 @@ EOF
$show "${rm}r $xdir"
$run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
+ # We will extract separately just the conflicting names and we will no
+ # longer touch any unique names. It is faster to leave these extract
+ # automatically by $AR in one run.
$show "(cd $xdir && $AR x $xabs)"
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+ if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+ $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+ $AR t "$xabs" | sort | uniq -cd | while read -r count name
+ do
+ i=1
+ while test "$i" -le "$count"
+ do
+ # Put our $i before any first dot (extension)
+ # Never overwrite any file
+ name_to="$name"
+ while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+ do
+ name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+ done
+ $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+ $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+ i=`expr $i + 1`
+ done
+ done
+ fi
- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+ reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
fi
fi
@@ -3079,10 +4024,11 @@ EOF
reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -3106,8 +4052,8 @@ EOF
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > $libobj" || exit $?
+ # $show "echo timestamp > $libobj"
+ # $run eval "echo timestamp > $libobj" || exit $?
exit 0
fi
@@ -3115,28 +4061,15 @@ EOF
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
IFS="$save_ifs"
- else
- # Just create a symlink.
- $show $rm $libobj
- $run $rm $libobj
- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$libobj"; then
- xdir="."
- else
- xdir="$xdir"
- fi
- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
- $show "(cd $xdir && $LN_S $oldobj $baseobj)"
- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
fi
if test -n "$gentop"; then
@@ -3149,7 +4082,7 @@ EOF
prog)
case $host in
- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
esac
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
@@ -3174,6 +4107,16 @@ EOF
;;
esac
+ case $host in
+ *darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ if test "$tagname" = CXX ; then
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ fi
+ ;;
+ esac
+
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
@@ -3324,12 +4267,12 @@ extern \"C\" {
done
if test -n "$exclude_expsyms"; then
- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
fi
if test -n "$export_symbols_regex"; then
- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
fi
@@ -3337,9 +4280,9 @@ extern \"C\" {
if test -z "$export_symbols"; then
export_symbols="$output_objdir/$output.exp"
$run $rm $export_symbols
- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
$run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
@@ -3347,8 +4290,8 @@ extern \"C\" {
for arg in $dlprefiles; do
$show "extracting global C symbols from \`$arg'"
- name=`echo "$arg" | sed -e 's%^.*/%%'`
- $run eval 'echo ": $name " >> "$nlist"'
+ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+ $run eval '$echo ": $name " >> "$nlist"'
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
done
@@ -3357,12 +4300,18 @@ extern \"C\" {
test -f "$nlist" || : > "$nlist"
if test -n "$exclude_expsyms"; then
- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
$mv "$nlist"T "$nlist"
fi
# Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+ if grep -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
:
else
grep -v "^: " < "$nlist" > "$nlist"S
@@ -3371,7 +4320,7 @@ extern \"C\" {
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
else
- echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ $echo '/* NONE */' >> "$output_objdir/$dlsyms"
fi
$echo >> "$output_objdir/$dlsyms" "\
@@ -3423,18 +4372,18 @@ static const void *lt_preloaded_setup() {
*-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
case "$compile_command " in
*" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
esac;;
*-*-hpux*)
case "$compile_command " in
*" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+ *) pic_flag_for_symtable=" $pic_flag";;
esac
esac
# Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
# Clean up the generated files.
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
@@ -3459,7 +4408,7 @@ static const void *lt_preloaded_setup() {
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
- if test $need_relink = no || test "$build_libtool_libs" != yes; then
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
@@ -3584,7 +4533,7 @@ static const void *lt_preloaded_setup() {
relink_command="$var=\"$var_value\"; export $var; $relink_command"
fi
done
- relink_command="cd `pwd`; $relink_command"
+ relink_command="(cd `pwd`; $relink_command)"
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
@@ -3604,13 +4553,228 @@ static const void *lt_preloaded_setup() {
# win32 will think the script is a binary if it has
# a .exe suffix, so we strip it off here.
case $output in
- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
esac
# test for cygwin because mv fails w/o .exe extensions
case $host in
- *cygwin*) exeext=.exe ;;
+ *cygwin*)
+ exeext=.exe
+ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
*) exeext= ;;
esac
+ case $host in
+ *cygwin* | *mingw* )
+ cwrappersource=`$echo ${objdir}/lt-${output}.c`
+ cwrapper=`$echo ${output}.exe`
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
+
+ cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "/bin/sh $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
+*/
+EOF
+ cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+#define DIR_SEPARATOR '/'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+#define HAVE_DOS_BASED_FILE_SYSTEM
+#ifndef DIR_SEPARATOR_2
+#define DIR_SEPARATOR_2 '\\'
+#endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+char * basename (const char *name);
+char * fnqualify(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int i;
+
+ program_name = (char *) xstrdup ((char *) basename (argv[0]));
+ newargz = XMALLOC(char *, argc+2);
+EOF
+
+ cat >> $cwrappersource <<EOF
+ newargz[0] = "$SHELL";
+EOF
+
+ cat >> $cwrappersource <<"EOF"
+ newargz[1] = fnqualify(argv[0]);
+ /* we know the script has the same name, without the .exe */
+ /* so make sure newargz[1] doesn't end in .exe */
+ strendzap(newargz[1],".exe");
+ for (i = 1; i < argc; i++)
+ newargz[i+1] = xstrdup(argv[i]);
+ newargz[argc+1] = NULL;
+EOF
+
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",newargz);
+EOF
+
+ cat >> $cwrappersource <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void * p = (void *) malloc (num);
+ if (!p)
+ lt_fatal ("Memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+char *
+basename (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha (name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return (char *) base;
+}
+
+char *
+fnqualify(const char *path)
+{
+ size_t size;
+ char *p;
+ char tmp[LT_PATHMAX + 1];
+
+ assert(path != NULL);
+
+ /* Is it qualified already? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha (path[0]) && path[1] == ':')
+ return xstrdup (path);
+#endif
+ if (IS_DIR_SEPARATOR (path[0]))
+ return xstrdup (path);
+
+ /* prepend the current directory */
+ /* doesn't handle '~' */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
+ p = XMALLOC(char, size);
+ sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
+ return p;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert(str != NULL);
+ assert(pat != NULL);
+
+ len = strlen(str);
+ patlen = strlen(pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp(str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+ const char * message, va_list ap)
+{
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ va_end (ap);
+}
+EOF
+ # we should really use a build-platform specific compiler
+ # here, but OTOH, the wrappers (shell script and this C one)
+ # are only useful if you want to execute the "real" binary.
+ # Since the "real" binary is built for $host, then this
+ # wrapper might as well be built for $host, too.
+ $run $LTCC -s -o $cwrapper $cwrappersource
+ ;;
+ esac
$rm $output
trap "$rm $output; exit 1" 1 2 15
@@ -3628,7 +4792,7 @@ static const void *lt_preloaded_setup() {
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
+Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# The HP-UX ksh and POSIX shell print the target directory to stdout
@@ -3666,7 +4830,7 @@ else
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
while test -n \"\$file\"; do
destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
@@ -3679,7 +4843,7 @@ else
fi
file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
done
# Try to get the absolute directory name.
@@ -3688,12 +4852,12 @@ else
"
if test "$fast_install" = yes; then
- echo >> $output "\
+ $echo >> $output "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
@@ -3704,7 +4868,7 @@ else
$rm \"\$progdir/\$file\"
fi"
- echo >> $output "\
+ $echo >> $output "\
# relink executable if necessary
if test -n \"\$relink_command\"; then
@@ -3722,13 +4886,13 @@ else
$rm \"\$progdir/\$file\"
fi"
else
- echo >> $output "\
+ $echo >> $output "\
program='$outputname'
progdir=\"\$thisdir/$objdir\"
"
fi
- echo >> $output "\
+ $echo >> $output "\
if test -f \"\$progdir/\$program\"; then"
@@ -3759,14 +4923,6 @@ else
# Run the actual program with our arguments.
"
case $host in
- # win32 systems need to use the prog path for dll
- # lookup to work
- *-*-cygwin* | *-*-pw32*)
- $echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
-"
- ;;
-
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
@@ -3776,11 +4932,7 @@ else
*)
$echo >> $output "\
- # Export the path to the program.
- PATH=\"\$progdir:\$PATH\"
- export PATH
-
- exec \$program \${1+\"\$@\"}
+ exec \$progdir/\$program \${1+\"\$@\"}
"
;;
esac
@@ -3792,7 +4944,7 @@ else
# The program doesn't exist.
\$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
- echo \"See the $PACKAGE documentation for more information.\" 1>&2
+ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
@@ -3815,7 +4967,7 @@ fi\
oldobjs="$libobjs_save"
build_libtool_libs=no
else
- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+ oldobjs="$old_deplibs $non_pic_objects"
fi
addlibs="$old_convenience"
fi
@@ -3824,10 +4976,10 @@ fi\
gentop="$output_objdir/${outputname}x"
$show "${rm}r $gentop"
$run ${rm}r "$gentop"
- $show "mkdir $gentop"
- $run mkdir "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$gentop"; then
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
exit $status
fi
generated="$generated $gentop"
@@ -3844,14 +4996,40 @@ fi\
$show "${rm}r $xdir"
$run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
+ $show "$mkdir $xdir"
+ $run $mkdir "$xdir"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test "$status" -ne 0 && test ! -d "$xdir"; then
exit $status
fi
+ # We will extract separately just the conflicting names and we will no
+ # longer touch any unique names. It is faster to leave these extract
+ # automatically by $AR in one run.
$show "(cd $xdir && $AR x $xabs)"
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+ if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+ $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+ $AR t "$xabs" | sort | uniq -cd | while read -r count name
+ do
+ i=1
+ while test "$i" -le "$count"
+ do
+ # Put our $i before any first dot (extension)
+ # Never overwrite any file
+ name_to="$name"
+ while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
+ do
+ name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+ done
+ $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
+ $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
+ i=`expr $i + 1`
+ done
+ done
+ fi
oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
done
@@ -3859,30 +5037,71 @@ fi\
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- eval cmds=\"$old_archive_from_new_cmds\"
+ cmds=$old_archive_from_new_cmds
else
- # Ensure that we have .o objects in place in case we decided
- # not to build a shared library, and have fallen back to building
- # static libs even though --disable-static was passed!
- for oldobj in $oldobjs; do
- if test ! -f $oldobj; then
- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$oldobj"; then
- xdir="."
+ eval cmds=\"$old_archive_cmds\"
+
+ if len=`expr "X$cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ $echo "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ # GNU ar 2.10+ was changed to match POSIX; thus no paths are
+ # encoded into archives. This makes 'ar r' malfunction in
+ # this piecewise linking case whenever conflicting object
+ # names appear in distinct ar calls; check, warn and compensate.
+ if (for obj in $save_oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
+ $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
+ AR_FLAGS=cq
+ fi
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ for obj in $save_oldobjs
+ do
+ oldobjs="$objlist $obj"
+ objlist="$objlist $obj"
+ eval test_cmds=\"$old_archive_cmds\"
+ if len=`expr "X$test_cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len"; then
+ :
else
- xdir="$xdir"
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
fi
- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
- $show "(cd $xdir && ${LN_S} $obj $baseobj)"
- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
- done
-
- eval cmds=\"$old_archive_cmds\"
+ fi
fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
+ eval cmd=\"$cmd\"
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd" || exit $?
@@ -3914,9 +5133,11 @@ fi\
fi
done
# Quote the link command for shipping.
- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@"
+ relink_command="(cd `pwd`; $SHELL $0 $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
# Only create the output if not a dry run.
if test -z "$run"; then
for installed in no yes; do
@@ -3931,58 +5152,21 @@ fi\
case $deplib in
*.la)
name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
exit 1
fi
- # We do not want portage's install root ($D) present. Check only for
- # this if the .la is being installed.
- if test "$installed" = yes && test "$D"; then
- eval mynewdependency_lib="`echo "$libdir/$name" |sed -e "s:$D::g" -e 's://:/:g'`"
- else
- mynewdependency_lib="$libdir/$name"
- fi
- # Do not add duplicates
- if test "$mynewdependency_lib"; then
- if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
- newdependency_libs="$newdependency_libs $mynewdependency_lib"
- fi
- fi
- ;;
- *)
- if test "$installed" = yes; then
- # Rather use S=WORKDIR if our version of portage supports it.
- # This is because some ebuild (gcc) do not use $S as buildroot.
- if test "$PWORKDIR"; then
- S="$PWORKDIR"
- fi
- # We do not want portage's build root ($S) present.
- if test -n "`echo $deplib |grep -e "$S"`" && test "$S"; then
- mynewdependency_lib=""
- # We do not want portage's install root ($D) present.
- elif test -n "`echo $deplib |grep -e "$D"`" && test "$D"; then
- eval mynewdependency_lib="`echo "$deplib" |sed -e "s:$D::g" -e 's://:/:g'`"
- else
- mynewdependency_lib="$deplib"
- fi
- else
- mynewdependency_lib="$deplib"
- fi
- # Do not add duplicates
- if test "$mynewdependency_lib"; then
- if test -z "`echo $newdependency_libs |grep -e "$mynewdependency_lib"`"; then
- newdependency_libs="$newdependency_libs $mynewdependency_lib"
- fi
- fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
newdlfiles=
for lib in $dlfiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
@@ -3993,7 +5177,7 @@ fi\
newdlprefiles=
for lib in $dlprefiles; do
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
@@ -4001,17 +5185,32 @@ fi\
newdlprefiles="$newdlprefiles $libdir/$name"
done
dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlfiles="$newdlfiles $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlprefiles="$newdlprefiles $abs"
+ done
+ dlprefiles="$newdlprefiles"
fi
$rm $output
# place dlname in correct position for cygwin
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
- # Do not add duplicates
- if test "$installed" = yes && test "$D"; then
- install_libdir="`echo "$install_libdir" |sed -e "s:$D::g" -e 's://:/:g'`"
- fi
$echo > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
@@ -4039,13 +5238,16 @@ revision=$revision
# Is this an already installed library?
installed=$installed
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test $need_relink = yes; then
+ if test "$installed" = no && test "$need_relink" = yes; then
$echo >> $output "\
relink_command=\"$relink_command\""
fi
@@ -4181,7 +5383,7 @@ relink_command=\"$relink_command\""
# Not a directory, so check to see that there is only one file specified.
set dummy $files
- if test $# -gt 2; then
+ if test "$#" -gt 2; then
$echo "$modename: \`$dest' is not a directory" 1>&2
$echo "$help" 1>&2
exit 1
@@ -4221,7 +5423,7 @@ relink_command=\"$relink_command\""
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
@@ -4257,11 +5459,14 @@ relink_command=\"$relink_command\""
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
+ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
# are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
if test "$inst_prefix_dir" = "$destdir"; then
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
exit 1
@@ -4269,9 +5474,9 @@ relink_command=\"$relink_command\""
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
@@ -4301,7 +5506,7 @@ relink_command=\"$relink_command\""
$run eval "$striplib $destdir/$realname" || exit $?
fi
- if test $# -gt 0; then
+ if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
for linkname
do
@@ -4314,10 +5519,11 @@ relink_command=\"$relink_command\""
# Do each command in the postinstall commands.
lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -4387,20 +5593,48 @@ relink_command=\"$relink_command\""
destfile="$destdir/$destfile"
fi
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
# Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ case $host in
+ *cygwin*|*mingw*)
+ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
notinst_deplibs=
relink_command=
+ # To insure that "foo" is sourced, and not "foo.exe",
+ # finese the cygwin/MSYS system by explicitly sourcing "foo."
+ # which disallows the automatic-append-.exe behavior.
+ case $build in
+ *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+ *) wrapperdot=${wrapper} ;;
+ esac
# If there is no directory component, then add one.
case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
+ */* | *\\*) . ${wrapperdot} ;;
+ *) . ./${wrapperdot} ;;
esac
# Check the variables that should have been set.
if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
exit 1
fi
@@ -4423,10 +5657,17 @@ relink_command=\"$relink_command\""
done
relink_command=
+ # To insure that "foo" is sourced, and not "foo.exe",
+ # finese the cygwin/MSYS system by explicitly sourcing "foo."
+ # which disallows the automatic-append-.exe behavior.
+ case $build in
+ *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
+ *) wrapperdot=${wrapper} ;;
+ esac
# If there is no directory component, then add one.
case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
+ */* | *\\*) . ${wrapperdot} ;;
+ *) . ./${wrapperdot} ;;
esac
outputname=
@@ -4434,17 +5675,13 @@ relink_command=\"$relink_command\""
if test "$finalize" = yes && test -z "$run"; then
tmpdir="/tmp"
test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null`
- if test $? = 0 ; then :
- else
- tmpdir="$tmpdir/libtool-$$"
- fi
- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+ tmpdir="$tmpdir/libtool-$$"
+ if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
else
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
continue
fi
- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
@@ -4462,14 +5699,14 @@ relink_command=\"$relink_command\""
fi
else
# Install the binary that we compiled earlier.
- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
# remove .exe since cygwin /usr/bin/install will append another
# one anyways
case $install_prog,$host in
- /usr/bin/install*,*cygwin*)
+ */usr/bin/install*,*cygwin*)
case $file:$destfile in
*.exe:*.exe)
# this is ok
@@ -4478,7 +5715,7 @@ relink_command=\"$relink_command\""
destfile=$destfile.exe
;;
*:*.exe)
- destfile=`echo $destfile | sed -e 's,.exe$,,'`
+ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
;;
esac
;;
@@ -4499,16 +5736,17 @@ relink_command=\"$relink_command\""
$show "$install_prog $file $oldlib"
$run eval "$install_prog \$file \$oldlib" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
+ if test -n "$stripme" && test -n "$old_striplib"; then
$show "$old_striplib $oldlib"
$run eval "$old_striplib $oldlib" || exit $?
fi
# Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$old_postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -4522,7 +5760,7 @@ relink_command=\"$relink_command\""
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $0 --finish$current_libdirs'
+ exec_cmd='$SHELL $0 $preserve_args --finish$current_libdirs'
else
exit 0
fi
@@ -4543,10 +5781,11 @@ relink_command=\"$relink_command\""
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$finish_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || admincmds="$admincmds
$cmd"
@@ -4563,42 +5802,42 @@ relink_command=\"$relink_command\""
fi
# Exit here if they wanted silent mode.
- test "$show" = ":" && exit 0
+ test "$show" = : && exit 0
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
+ $echo "----------------------------------------------------------------------"
+ $echo "Libraries have been installed in:"
for libdir in $libdirs; do
- echo " $libdir"
+ $echo " $libdir"
done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
+ $echo
+ $echo "If you ever happen to want to link against installed libraries"
+ $echo "in a given directory, LIBDIR, you must either use libtool, and"
+ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
+ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
+ $echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ $echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- echo " - use the \`$flag' linker flag"
+ $echo " - use the \`$flag' linker flag"
fi
if test -n "$admincmds"; then
- echo " - have your system administrator run these commands:$admincmds"
+ $echo " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
fi
- echo
- echo "See any operating system documentation about shared libraries for"
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- echo "----------------------------------------------------------------------"
+ $echo
+ $echo "See any operating system documentation about shared libraries for"
+ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ $echo "----------------------------------------------------------------------"
exit 0
;;
@@ -4626,7 +5865,7 @@ relink_command=\"$relink_command\""
case $file in
*.la)
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
@@ -4697,7 +5936,7 @@ relink_command=\"$relink_command\""
-*) ;;
*)
# Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# If there is no directory component, then add one.
case $file in
*/* | *\\*) . $file ;;
@@ -4720,7 +5959,7 @@ relink_command=\"$relink_command\""
eval "export $shlibpath_var"
fi
- # Restore saved enviroment variables
+ # Restore saved environment variables
if test "${save_LC_ALL+set}" = set; then
LC_ALL="$save_LC_ALL"; export LC_ALL
fi
@@ -4729,7 +5968,7 @@ relink_command=\"$relink_command\""
fi
# Now prepare to actually exec the command.
- exec_cmd='"$cmd"$args'
+ exec_cmd="\$cmd$args"
else
# Display what would be done.
if test -n "$shlibpath_var"; then
@@ -4770,19 +6009,20 @@ relink_command=\"$relink_command\""
rmdirs=
+ origobjdir="$objdir"
for file in $files; do
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
if test "X$dir" = "X$file"; then
dir=.
- objdir="$objdir"
+ objdir="$origobjdir"
else
- objdir="$dir/$objdir"
+ objdir="$dir/$origobjdir"
fi
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test $mode = uninstall && objdir="$dir"
+ test "$mode" = uninstall && objdir="$dir"
# Remember objdir for removal later, being careful to avoid duplicates
- if test $mode = clean; then
+ if test "$mode" = clean; then
case " $rmdirs " in
*" $objdir "*) ;;
*) rmdirs="$rmdirs $objdir" ;;
@@ -4806,7 +6046,7 @@ relink_command=\"$relink_command\""
case $name in
*.la)
# Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
. $dir/$name
# Delete the libtool libraries and symlinks.
@@ -4814,18 +6054,19 @@ relink_command=\"$relink_command\""
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test $mode = uninstall; then
+ if test "$mode" = uninstall; then
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
- if test $? != 0 && test "$rmforce" != yes; then
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
@@ -4834,13 +6075,14 @@ relink_command=\"$relink_command\""
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ cmds=$old_postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
- if test $? != 0 && test "$rmforce" != yes; then
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
exit_status=1
fi
done
@@ -4852,22 +6094,52 @@ relink_command=\"$relink_command\""
;;
*.lo)
- if test "$build_old_libs" = yes; then
- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
- rmfiles="$rmfiles $dir/$oldobj"
+ # Possibly a libtool object, so verify it.
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+ # Read the .lo file
+ . $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" \
+ && test "$pic_object" != none; then
+ rmfiles="$rmfiles $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" \
+ && test "$non_pic_object" != none; then
+ rmfiles="$rmfiles $dir/$non_pic_object"
+ fi
fi
;;
*)
- # Do a test to see if this is a libtool program.
- if test $mode = clean &&
- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$file
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ noexename=`$echo $name|${SED} 's,.exe$,,'`
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ rmfiles="$rmfiles $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ relink_command=
+ . $dir/$noexename
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ fi
fi
fi
;;
@@ -4875,6 +6147,7 @@ relink_command=\"$relink_command\""
$show "$rm $rmfiles"
$run $rm $rmfiles || exit_status=1
done
+ objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
@@ -4922,6 +6195,7 @@ Provide generalized library-building support services.
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
--quiet same as \`--silent'
--silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
--version print version information
MODE must be one of the following:
@@ -4935,7 +6209,9 @@ MODE must be one of the following:
uninstall remove libraries from an installed directory
MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
exit 0
;;
@@ -5047,6 +6323,9 @@ The following components of LINK-COMMAND are treated specially:
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
@@ -5092,11 +6371,31 @@ Otherwise, only FILE itself is deleted using RM."
;;
esac
-echo
+$echo
$echo "Try \`$modename --help' for more information about other modes."
exit 0
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
# Local Variables:
# mode:shell-script
# sh-indentation:2
diff --git a/missing b/missing
index 6a37006..e7ef83a 100755
--- a/missing
+++ b/missing
@@ -1,6 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+
+scriptversion=2003-09-02.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003
+# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -38,12 +42,23 @@ else
configure_ac=configure.in
fi
+msg="missing on your system"
+
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
;;
esac
@@ -74,11 +89,13 @@ Supported PROGRAM values:
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
+ echo "missing $scriptversion (GNU Automake)"
;;
-*)
@@ -94,7 +111,7 @@ Supported PROGRAM values:
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
@@ -108,7 +125,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
@@ -122,7 +139,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
@@ -146,7 +163,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
@@ -162,10 +179,10 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
proper tools for further handling them.
- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+ You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
@@ -185,7 +202,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
bison|yacc)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
@@ -215,7 +232,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
lex|flex)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
@@ -243,7 +260,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
@@ -268,7 +285,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
fi
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
@@ -323,10 +340,10 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
+ it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
esac
exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/mkinstalldirs b/mkinstalldirs
index 7ed85d2..6fbe5e1 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -1,40 +1,150 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-# $Id: mkinstalldirs,v 1.2 2003/04/23 08:34:02 crunchy Exp $
+scriptversion=2004-02-15.20
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit 0
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
for file
do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
+ mkdir "$pathcomp" || lasterr=$?
- mkdir "$pathcomp" || lasterr=$?
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
- pathcomp="$pathcomp/"
- done
+ pathcomp="$pathcomp/"
+ done
done
exit $errstatus
-# mkinstalldirs ends here
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: