diff options
Diffstat (limited to 'n35-skeleton')
56 files changed, 0 insertions, 777 deletions
diff --git a/n35-skeleton/bin/.empty b/n35-skeleton/bin/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/bin/.empty +++ /dev/null diff --git a/n35-skeleton/dev/log b/n35-skeleton/dev/log deleted file mode 120000 index d96b3b1..0000000 --- a/n35-skeleton/dev/log +++ /dev/null @@ -1 +0,0 @@ -../tmp/log
\ No newline at end of file diff --git a/n35-skeleton/dev/pts/.empty b/n35-skeleton/dev/pts/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/dev/pts/.empty +++ /dev/null diff --git a/n35-skeleton/etc/TZ b/n35-skeleton/etc/TZ deleted file mode 100644 index 9fcb2a3..0000000 --- a/n35-skeleton/etc/TZ +++ /dev/null @@ -1 +0,0 @@ -MST7MDT diff --git a/n35-skeleton/etc/X11/xorg.conf b/n35-skeleton/etc/X11/xorg.conf deleted file mode 100644 index dead0d5..0000000 --- a/n35-skeleton/etc/X11/xorg.conf +++ /dev/null @@ -1,6 +0,0 @@ -Section "InputDevice" - Identifier "touchscreen" - Driver "evdev" - Option "Device" "/dev/input/event0" - Option "InvertY" "true" -EndSection diff --git a/n35-skeleton/etc/directfbrc b/n35-skeleton/etc/directfbrc deleted file mode 100644 index e9f658e..0000000 --- a/n35-skeleton/etc/directfbrc +++ /dev/null @@ -1,2 +0,0 @@ -tslib-devices=/dev/input/event0 -linux-input-devices=/dev/input/event1 diff --git a/n35-skeleton/etc/fstab b/n35-skeleton/etc/fstab deleted file mode 100644 index a2f56ff..0000000 --- a/n35-skeleton/etc/fstab +++ /dev/null @@ -1,9 +0,0 @@ -# /etc/fstab: static file system information. -# -# <file system> <mount pt> <type> <options> <dump> <pass> -/dev/root / ext2 rw,noauto 0 1 -proc /proc proc defaults 0 0 -devpts /dev/pts devpts defaults,gid=5,mode=620 0 0 -tmpfs /dev/shm tmpfs mode=0777 0 0 -tmpfs /tmp tmpfs defaults 0 0 -sysfs /sys sysfs defaults 0 0 diff --git a/n35-skeleton/etc/group b/n35-skeleton/etc/group deleted file mode 100644 index 311a455..0000000 --- a/n35-skeleton/etc/group +++ /dev/null @@ -1,19 +0,0 @@ -root:x:0: -daemon:x:1: -bin:x:2: -sys:x:3: -adm:x:4: -tty:x:5: -disk:x:6: -wheel:x:10:root -audio:x:29: -utmp:x:43: -staff:x:50: -haldaemon:x:68: -dbus:x:81: -netdev:x:82: -ftp:x:83 -nobody:x:99: -nogroup:x:99: -users:x:100: -default:x:1000: diff --git a/n35-skeleton/etc/hostname b/n35-skeleton/etc/hostname deleted file mode 100644 index e5b1308..0000000 --- a/n35-skeleton/etc/hostname +++ /dev/null @@ -1 +0,0 @@ -n35 diff --git a/n35-skeleton/etc/hosts b/n35-skeleton/etc/hosts deleted file mode 100644 index ba712fe..0000000 --- a/n35-skeleton/etc/hosts +++ /dev/null @@ -1 +0,0 @@ -127.0.0.1 localhost diff --git a/n35-skeleton/etc/init.d/S20urandom b/n35-skeleton/etc/init.d/S20urandom deleted file mode 100755 index f73cea5..0000000 --- a/n35-skeleton/etc/init.d/S20urandom +++ /dev/null @@ -1,54 +0,0 @@ -#! /bin/sh -# -# urandom This script saves the random seed between reboots. -# It is called from the boot, halt and reboot scripts. -# -# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl -# - -[ -c /dev/urandom ] || exit 0 -#. /etc/default/rcS - -case "$1" in - start|"") - if [ "$VERBOSE" != no ] - then - echo -n "Initializing random number generator... " - fi - # Load and then save 512 bytes, - # which is the size of the entropy pool - if [ -f /etc/random-seed ] - then - cat /etc/random-seed >/dev/urandom - fi - # check for read only file system - if ! touch /etc/random-seed 2>/dev/null - then - echo "read-only file system detected...done" - exit - fi - rm -f /etc/random-seed - umask 077 - dd if=/dev/urandom of=/etc/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom start: failed." - umask 022 - [ "$VERBOSE" != no ] && echo "done." - ;; - stop) - if ! touch /etc/random-seed 2>/dev/null - then - exit - fi - # Carry a random seed from shut-down to start-up; - # see documentation in linux/drivers/char/random.c - [ "$VERBOSE" != no ] && echo -n "Saving random seed... " - umask 077 - dd if=/dev/urandom of=/etc/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom stop: failed." - [ "$VERBOSE" != no ] && echo "done." - ;; - *) - echo "Usage: urandom {start|stop}" >&2 - exit 1 - ;; -esac diff --git a/n35-skeleton/etc/init.d/S40network b/n35-skeleton/etc/init.d/S40network deleted file mode 100755 index ad6d250..0000000 --- a/n35-skeleton/etc/init.d/S40network +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh -# -# Start the network.... -# - -case "$1" in - start) - echo "Starting network..." - /sbin/ifup -a - ;; - stop) - echo -n "Stopping network..." - /sbin/ifdown -a - ;; - restart|reload) - "$0" stop - "$0" start - ;; - *) - echo $"Usage: $0 {start|stop|restart}" - exit 1 -esac - -exit $? - diff --git a/n35-skeleton/etc/init.d/S50telnetd b/n35-skeleton/etc/init.d/S50telnetd deleted file mode 100755 index 7e48064..0000000 --- a/n35-skeleton/etc/init.d/S50telnetd +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh -# -# Start telnetd -# - -start() { - echo "Starting telnetd..." - /usr/sbin/telnetd -} -stop() { - echo -n "Stopping telnetd..." - killall telnetd -} -restart() { - stop - start -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart|reload) - restart - ;; - *) - echo $"Usage: $0 {start|stop|restart}" - exit 1 -esac - -exit $? - diff --git a/n35-skeleton/etc/init.d/rcS b/n35-skeleton/etc/init.d/rcS deleted file mode 100755 index de41153..0000000 --- a/n35-skeleton/etc/init.d/rcS +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - - -# Start all init scripts in /etc/init.d -# executing them in numerical order. -# -for i in /etc/init.d/S??* ;do - - # Ignore dangling symlinks (if any). - [ ! -f "$i" ] && continue - - case "$i" in - *.sh) - # Source shell script for speed. - ( - trap - INT QUIT TSTP - set start - . $i - ) - ;; - *) - # No sh extension, so fork subprocess. - $i start - ;; - esac -done - diff --git a/n35-skeleton/etc/inittab b/n35-skeleton/etc/inittab deleted file mode 100644 index 501ee7b..0000000 --- a/n35-skeleton/etc/inittab +++ /dev/null @@ -1,42 +0,0 @@ -# /etc/inittab -# -# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org> -# -# Note: BusyBox init doesn't support runlevels. The runlevels field is -# completely ignored by BusyBox init. If you want runlevels, use -# sysvinit. -# -# Format for each entry: <id>:<runlevels>:<action>:<process> -# -# id == tty to run on, or empty for /dev/console -# runlevels == ignored -# action == one of sysinit, respawn, askfirst, wait, and once -# process == program to run - -# Startup the system -null::sysinit:/bin/mount -t proc proc /proc -#null::sysinit:/bin/mount -o remount,rw / # REMOUNT_ROOTFS_RW -null::sysinit:/bin/mkdir -p /dev/pts -null::sysinit:/bin/mkdir -p /dev/shm -null::sysinit:/bin/mount -a -null::sysinit:/bin/hostname -F /etc/hostname -# now run any rc scripts -::sysinit:/etc/init.d/rcS - -# Set up a couple of getty's -tty1::respawn:/sbin/getty 38400 tty1 -tty2::respawn:/sbin/getty 38400 tty2 - -# Put a getty on the serial port -#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 -ttySAC0::respawn:/sbin/getty -L ttySAC0 115200 vt100 - -# Stuff to do for the 3-finger salute -::ctrlaltdel:/sbin/reboot - -# Stuff to do before rebooting -null::shutdown:/usr/bin/killall klogd -null::shutdown:/usr/bin/killall syslogd -null::shutdown:/bin/umount -a -r -null::shutdown:/sbin/swapoff -a - diff --git a/n35-skeleton/etc/inputrc b/n35-skeleton/etc/inputrc deleted file mode 100644 index 2f1cb60..0000000 --- a/n35-skeleton/etc/inputrc +++ /dev/null @@ -1,44 +0,0 @@ -# /etc/inputrc - global inputrc for libreadline -# See readline(3readline) and `info readline' for more information. - -# Be 8 bit clean. -set input-meta on -set output-meta on -set bell-style visible - -# To allow the use of 8bit-characters like the german umlauts, comment out -# the line below. However this makes the meta key not work as a meta key, -# which is annoying to those which don't need to type in 8-bit characters. - -# set convert-meta off - -"\e0d": backward-word -"\e0c": forward-word -"\e[h": beginning-of-line -"\e[f": end-of-line -"\e[1~": beginning-of-line -"\e[4~": end-of-line -#"\e[5~": beginning-of-history -#"\e[6~": end-of-history -"\e[3~": delete-char -"\e[2~": quoted-insert - -# Common standard keypad and cursor -# (codes courtsey Werner Fink, <werner@suse.de>) -#"\e[1~": history-search-backward -"\e[2~": yank -"\e[3~": delete-char -#"\e[4~": set-mark -"\e[5~": history-search-backward -"\e[6~": history-search-forward -# Normal keypad and cursor of xterm -"\e[F": end-of-line -"\e[H": beginning-of-line -# Application keypad and cursor of xterm -"\eOA": previous-history -"\eOC": forward-char -"\eOB": next-history -"\eOD": backward-char -"\eOF": end-of-line -"\eOH": beginning-of-line - diff --git a/n35-skeleton/etc/issue b/n35-skeleton/etc/issue deleted file mode 100644 index 9241938..0000000 --- a/n35-skeleton/etc/issue +++ /dev/null @@ -1,2 +0,0 @@ -Welcome to Acer n35 - diff --git a/n35-skeleton/etc/ld.so.conf.d/.empty b/n35-skeleton/etc/ld.so.conf.d/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/etc/ld.so.conf.d/.empty +++ /dev/null diff --git a/n35-skeleton/etc/mtab b/n35-skeleton/etc/mtab deleted file mode 120000 index e1c2045..0000000 --- a/n35-skeleton/etc/mtab +++ /dev/null @@ -1 +0,0 @@ -../proc/mounts
\ No newline at end of file diff --git a/n35-skeleton/etc/network/if-down.d/.empty b/n35-skeleton/etc/network/if-down.d/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/etc/network/if-down.d/.empty +++ /dev/null diff --git a/n35-skeleton/etc/network/if-post-down.d/.empty b/n35-skeleton/etc/network/if-post-down.d/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/etc/network/if-post-down.d/.empty +++ /dev/null diff --git a/n35-skeleton/etc/network/if-pre-up.d/.empty b/n35-skeleton/etc/network/if-pre-up.d/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/etc/network/if-pre-up.d/.empty +++ /dev/null diff --git a/n35-skeleton/etc/network/if-up.d/.empty b/n35-skeleton/etc/network/if-up.d/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/etc/network/if-up.d/.empty +++ /dev/null diff --git a/n35-skeleton/etc/network/interfaces b/n35-skeleton/etc/network/interfaces deleted file mode 100644 index d90b89e..0000000 --- a/n35-skeleton/etc/network/interfaces +++ /dev/null @@ -1,10 +0,0 @@ -# Configure Loopback -auto lo -iface lo inet loopback - -# USB to ethernet -auto usb0 -iface usb0 inet static - address 192.168.131.201 - netmask 255.255.255.0 - gateway 192.168.131.102 diff --git a/n35-skeleton/etc/passwd b/n35-skeleton/etc/passwd deleted file mode 100644 index ed7006a..0000000 --- a/n35-skeleton/etc/passwd +++ /dev/null @@ -1,16 +0,0 @@ -root:x:0:0:root:/root:/bin/sh -daemon:x:1:1:daemon:/usr/sbin:/bin/sh -bin:x:2:2:bin:/bin:/bin/sh -sys:x:3:3:sys:/dev:/bin/sh -sync:x:4:100:sync:/bin:/bin/sync -mail:x:8:8:mail:/var/spool/mail:/bin/sh -proxy:x:13:13:proxy:/bin:/bin/sh -www-data:x:33:33:www-data:/var/www:/bin/sh -backup:x:34:34:backup:/var/backups:/bin/sh -operator:x:37:37:Operator:/var:/bin/sh -haldaemon:x:68:68:hald:/:/bin/sh -dbus:x:81:81:dbus:/var/run/dbus:/bin/sh -ftp:x:83:83:ftp:/home/ftp:/bin/sh -nobody:x:99:99:nobody:/home:/bin/sh -sshd:x:103:99:Operator:/var:/bin/sh -default:x:1000:1000:Default non-root user:/home/default:/bin/sh diff --git a/n35-skeleton/etc/pointercal b/n35-skeleton/etc/pointercal deleted file mode 100644 index af58152..0000000 --- a/n35-skeleton/etc/pointercal +++ /dev/null @@ -1 +0,0 @@ -19397 133 -2166650 -157 -24731 23318028 65536 240 320
\ No newline at end of file diff --git a/n35-skeleton/etc/profile b/n35-skeleton/etc/profile deleted file mode 100644 index 31d3180..0000000 --- a/n35-skeleton/etc/profile +++ /dev/null @@ -1,55 +0,0 @@ -# ~/.bashrc: executed by bash(1) for non-login interactive shells. - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -# If running interactively, then: -if [ "$PS1" ]; then - - if [ "$BASH" ]; then - export PS1="[\u@\h \W]\\$ " - alias ll='/bin/ls --color=tty -laFh' - alias ls='/bin/ls --color=tty -F' - export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:'; - else - if [ "`id -u`" -eq 0 ]; then - export PS1='# ' - else - export PS1='$ ' - fi - fi - - export USER=`id -un` - export LOGNAME=$USER - export HOSTNAME=`/bin/hostname` - export HISTSIZE=1000 - export HISTFILESIZE=1000 - export PAGER='/bin/more ' - export EDITOR='/bin/vi' - export INPUTRC=/etc/inputrc - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - - ### Some aliases - alias ps2='ps facux ' - alias ps1='ps faxo "%U %t %p %a" ' - alias af='ps af' - alias cls='clear' - alias df='df -h' - alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 ' - #alias bc='bc -l' - alias minicom='minicom -c on' - alias calc='calc -Cd ' - alias bc='calc -Cd ' -fi; - -# Source configuration files from /etc/profile.d -for i in /etc/profile.d/*.sh ; do - if [ -r "$i" ]; then - . $i - fi -done diff --git a/n35-skeleton/etc/protocols b/n35-skeleton/etc/protocols deleted file mode 100644 index 1ac8a40..0000000 --- a/n35-skeleton/etc/protocols +++ /dev/null @@ -1,31 +0,0 @@ -# /etc/protocols: -# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $ -# -# Internet (IP) protocols -# -# from: @(#)protocols 5.1 (Berkeley) 4/17/89 -# -# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992). - -ip 0 IP # internet protocol, pseudo protocol number -icmp 1 ICMP # internet control message protocol -igmp 2 IGMP # Internet Group Management -ggp 3 GGP # gateway-gateway protocol -ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'') -st 5 ST # ST datagram mode -tcp 6 TCP # transmission control protocol -egp 8 EGP # exterior gateway protocol -pup 12 PUP # PARC universal packet protocol -udp 17 UDP # user datagram protocol -hmp 20 HMP # host monitoring protocol -xns-idp 22 XNS-IDP # Xerox NS IDP -rdp 27 RDP # "reliable datagram" protocol -iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4 -xtp 36 XTP # Xpress Tranfer Protocol -ddp 37 DDP # Datagram Delivery Protocol -idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport -rspf 73 RSPF #Radio Shortest Path First. -vmtp 81 VMTP # Versatile Message Transport -ospf 89 OSPFIGP # Open Shortest Path First IGP -ipip 94 IPIP # Yet Another IP encapsulation -encap 98 ENCAP # Yet Another IP encapsulation diff --git a/n35-skeleton/etc/random-seed b/n35-skeleton/etc/random-seed Binary files differdeleted file mode 100644 index f26038a..0000000 --- a/n35-skeleton/etc/random-seed +++ /dev/null diff --git a/n35-skeleton/etc/resolv.conf b/n35-skeleton/etc/resolv.conf deleted file mode 120000 index 71f6f96..0000000 --- a/n35-skeleton/etc/resolv.conf +++ /dev/null @@ -1 +0,0 @@ -../tmp/resolv.conf
\ No newline at end of file diff --git a/n35-skeleton/etc/securetty b/n35-skeleton/etc/securetty deleted file mode 100644 index 6c07d7f..0000000 --- a/n35-skeleton/etc/securetty +++ /dev/null @@ -1,48 +0,0 @@ -tty1 -tty2 -tty3 -tty4 -tty5 -tty6 -tty7 -tty8 -ttyS0 -ttyS1 -ttyS2 -ttyS3 -ttyAMA0 -ttyAMA1 -ttyAMA2 -ttyAMA3 -ttySAC0 -ttySAC1 -ttySAC2 -ttySAC3 -ttyUL0 -ttyUL1 -ttyUL2 -ttyUL3 -ttyPSC0 -ttyPSC1 -ttyPSC2 -ttyPSC3 -ttyCPM0 -ttyCPM1 -ttyCPM2 -ttyCPM3 -ttymxc0 -ttymxc1 -ttymxc2 -ttyO0 -ttyO1 -ttyO2 -ttyO3 -ttyAM0 -ttyAM1 -ttyAM2 -ttySC0 -ttySC1 -ttySC2 -ttySC3 -ttySC4 -ttySC5 diff --git a/n35-skeleton/etc/services b/n35-skeleton/etc/services deleted file mode 100644 index b287b63..0000000 --- a/n35-skeleton/etc/services +++ /dev/null @@ -1,302 +0,0 @@ -# /etc/services: -# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $ -# -# Network services, Internet style -# -# Note that it is presently the policy of IANA to assign a single well-known -# port number for both TCP and UDP; hence, most entries here have two entries -# even if the protocol doesn't support UDP operations. -# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports -# are included, only the more common ones. - -tcpmux 1/tcp # TCP port service multiplexer -echo 7/tcp -echo 7/udp -discard 9/tcp sink null -discard 9/udp sink null -systat 11/tcp users -daytime 13/tcp -daytime 13/udp -netstat 15/tcp -qotd 17/tcp quote -msp 18/tcp # message send protocol -msp 18/udp # message send protocol -chargen 19/tcp ttytst source -chargen 19/udp ttytst source -ftp-data 20/tcp -ftp 21/tcp -fsp 21/udp fspd -ssh 22/tcp # SSH Remote Login Protocol -ssh 22/udp # SSH Remote Login Protocol -telnet 23/tcp -# 24 - private -smtp 25/tcp mail -# 26 - unassigned -time 37/tcp timserver -time 37/udp timserver -rlp 39/udp resource # resource location -nameserver 42/tcp name # IEN 116 -whois 43/tcp nicname -re-mail-ck 50/tcp # Remote Mail Checking Protocol -re-mail-ck 50/udp # Remote Mail Checking Protocol -domain 53/tcp nameserver # name-domain server -domain 53/udp nameserver -mtp 57/tcp # deprecated -bootps 67/tcp # BOOTP server -bootps 67/udp -bootpc 68/tcp # BOOTP client -bootpc 68/udp -tftp 69/udp -gopher 70/tcp # Internet Gopher -gopher 70/udp -rje 77/tcp netrjs -finger 79/tcp -www 80/tcp http # WorldWideWeb HTTP -www 80/udp # HyperText Transfer Protocol -link 87/tcp ttylink -kerberos 88/tcp kerberos5 krb5 # Kerberos v5 -kerberos 88/udp kerberos5 krb5 # Kerberos v5 -supdup 95/tcp -# 100 - reserved -hostnames 101/tcp hostname # usually from sri-nic -iso-tsap 102/tcp tsap # part of ISODE. -csnet-ns 105/tcp cso-ns # also used by CSO name server -csnet-ns 105/udp cso-ns -# unfortunately the poppassd (Eudora) uses a port which has already -# been assigned to a different service. We list the poppassd as an -# alias here. This should work for programs asking for this service. -# (due to a bug in inetd the 3com-tsmux line is disabled) -#3com-tsmux 106/tcp poppassd -#3com-tsmux 106/udp poppassd -rtelnet 107/tcp # Remote Telnet -rtelnet 107/udp -pop-2 109/tcp postoffice # POP version 2 -pop-2 109/udp -pop-3 110/tcp # POP version 3 -pop-3 110/udp -sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP -sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP -auth 113/tcp authentication tap ident -sftp 115/tcp -uucp-path 117/tcp -nntp 119/tcp readnews untp # USENET News Transfer Protocol -ntp 123/tcp -ntp 123/udp # Network Time Protocol -netbios-ns 137/tcp # NETBIOS Name Service -netbios-ns 137/udp -netbios-dgm 138/tcp # NETBIOS Datagram Service -netbios-dgm 138/udp -netbios-ssn 139/tcp # NETBIOS session service -netbios-ssn 139/udp -imap2 143/tcp # Interim Mail Access Proto v2 -imap2 143/udp -snmp 161/udp # Simple Net Mgmt Proto -snmp-trap 162/udp snmptrap # Traps for SNMP -cmip-man 163/tcp # ISO mgmt over IP (CMOT) -cmip-man 163/udp -cmip-agent 164/tcp -cmip-agent 164/udp -xdmcp 177/tcp # X Display Mgr. Control Proto -xdmcp 177/udp -nextstep 178/tcp NeXTStep NextStep # NeXTStep window -nextstep 178/udp NeXTStep NextStep # server -bgp 179/tcp # Border Gateway Proto. -bgp 179/udp -prospero 191/tcp # Cliff Neuman's Prospero -prospero 191/udp -irc 194/tcp # Internet Relay Chat -irc 194/udp -smux 199/tcp # SNMP Unix Multiplexer -smux 199/udp -at-rtmp 201/tcp # AppleTalk routing -at-rtmp 201/udp -at-nbp 202/tcp # AppleTalk name binding -at-nbp 202/udp -at-echo 204/tcp # AppleTalk echo -at-echo 204/udp -at-zis 206/tcp # AppleTalk zone information -at-zis 206/udp -qmtp 209/tcp # The Quick Mail Transfer Protocol -qmtp 209/udp # The Quick Mail Transfer Protocol -z3950 210/tcp wais # NISO Z39.50 database -z3950 210/udp wais -ipx 213/tcp # IPX -ipx 213/udp -imap3 220/tcp # Interactive Mail Access -imap3 220/udp # Protocol v3 -ulistserv 372/tcp # UNIX Listserv -ulistserv 372/udp -https 443/tcp # MCom -https 443/udp # MCom -snpp 444/tcp # Simple Network Paging Protocol -snpp 444/udp # Simple Network Paging Protocol -saft 487/tcp # Simple Asynchronous File Transfer -saft 487/udp # Simple Asynchronous File Transfer -npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS -npmp-local 610/udp dqs313_qmaster # npmp-local / DQS -npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS -npmp-gui 611/udp dqs313_execd # npmp-gui / DQS -hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS -hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS -# -# UNIX specific services -# -exec 512/tcp -biff 512/udp comsat -login 513/tcp -who 513/udp whod -shell 514/tcp cmd # no passwords used -syslog 514/udp -printer 515/tcp spooler # line printer spooler -talk 517/udp -ntalk 518/udp -route 520/udp router routed # RIP -timed 525/udp timeserver -tempo 526/tcp newdate -courier 530/tcp rpc -conference 531/tcp chat -netnews 532/tcp readnews -netwall 533/udp # -for emergency broadcasts -uucp 540/tcp uucpd # uucp daemon -afpovertcp 548/tcp # AFP over TCP -afpovertcp 548/udp # AFP over TCP -remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem -klogin 543/tcp # Kerberized `rlogin' (v5) -kshell 544/tcp krcmd # Kerberized `rsh' (v5) -kerberos-adm 749/tcp # Kerberos `kadmin' (v5) -# -webster 765/tcp # Network dictionary -webster 765/udp -# -# From ``Assigned Numbers'': -# -#> The Registered Ports are not controlled by the IANA and on most systems -#> can be used by ordinary user processes or programs executed by ordinary -#> users. -# -#> Ports are used in the TCP [45,106] to name the ends of logical -#> connections which carry long term conversations. For the purpose of -#> providing services to unknown callers, a service contact port is -#> defined. This list specifies the port used by the server process as its -#> contact port. While the IANA can not control uses of these ports it -#> does register or list uses of these ports as a convienence to the -#> community. -# -nfsdstatus 1110/tcp -nfsd-keepalive 1110/udp - -ingreslock 1524/tcp -ingreslock 1524/udp -prospero-np 1525/tcp # Prospero non-privileged -prospero-np 1525/udp -datametrics 1645/tcp old-radius # datametrics / old radius entry -datametrics 1645/udp old-radius # datametrics / old radius entry -sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry -sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry -radius 1812/tcp # Radius -radius 1812/udp # Radius -radacct 1813/tcp # Radius Accounting -radacct 1813/udp # Radius Accounting -nfsd 2049/tcp nfs -nfsd 2049/udp nfs -cvspserver 2401/tcp # CVS client/server operations -cvspserver 2401/udp # CVS client/server operations -mysql 3306/tcp # MySQL -mysql 3306/udp # MySQL -rfe 5002/tcp # Radio Free Ethernet -rfe 5002/udp # Actually uses UDP only -cfengine 5308/tcp # CFengine -cfengine 5308/udp # CFengine -bbs 7000/tcp # BBS service -# -# -# Kerberos (Project Athena/MIT) services -# Note that these are for Kerberos v4, and are unofficial. Sites running -# v4 should uncomment these and comment out the v5 entries above. -# -kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp -kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp -kerberos_master 751/udp # Kerberos authentication -kerberos_master 751/tcp # Kerberos authentication -passwd_server 752/udp # Kerberos passwd server -krb_prop 754/tcp # Kerberos slave propagation -krbupdate 760/tcp kreg # Kerberos registration -kpasswd 761/tcp kpwd # Kerberos "passwd" -kpop 1109/tcp # Pop with Kerberos -knetd 2053/tcp # Kerberos de-multiplexor -zephyr-srv 2102/udp # Zephyr server -zephyr-clt 2103/udp # Zephyr serv-hm connection -zephyr-hm 2104/udp # Zephyr hostmanager -eklogin 2105/tcp # Kerberos encrypted rlogin -# -# Unofficial but necessary (for NetBSD) services -# -supfilesrv 871/tcp # SUP server -supfiledbg 1127/tcp # SUP debugging -# -# Datagram Delivery Protocol services -# -rtmp 1/ddp # Routing Table Maintenance Protocol -nbp 2/ddp # Name Binding Protocol -echo 4/ddp # AppleTalk Echo Protocol -zip 6/ddp # Zone Information Protocol -# -# Services added for the Debian GNU/Linux distribution -poppassd 106/tcp # Eudora -poppassd 106/udp # Eudora -mailq 174/tcp # Mailer transport queue for Zmailer -mailq 174/tcp # Mailer transport queue for Zmailer -omirr 808/tcp omirrd # online mirror -omirr 808/udp omirrd # online mirror -rmtcfg 1236/tcp # Gracilis Packeten remote config server -xtel 1313/tcp # french minitel -coda_opcons 1355/udp # Coda opcons (Coda fs) -coda_venus 1363/udp # Coda venus (Coda fs) -coda_auth 1357/udp # Coda auth (Coda fs) -coda_udpsrv 1359/udp # Coda udpsrv (Coda fs) -coda_filesrv 1361/udp # Coda filesrv (Coda fs) -codacon 1423/tcp venus.cmu # Coda Console (Coda fs) -coda_aux1 1431/tcp # coda auxiliary service (Coda fs) -coda_aux1 1431/udp # coda auxiliary service (Coda fs) -coda_aux2 1433/tcp # coda auxiliary service (Coda fs) -coda_aux2 1433/udp # coda auxiliary service (Coda fs) -coda_aux3 1435/tcp # coda auxiliary service (Coda fs) -coda_aux3 1435/udp # coda auxiliary service (Coda fs) -cfinger 2003/tcp # GNU Finger -afbackup 2988/tcp # Afbackup system -afbackup 2988/udp # Afbackup system -icp 3130/tcp # Internet Cache Protocol (Squid) -icp 3130/udp # Internet Cache Protocol (Squid) -postgres 5432/tcp # POSTGRES -postgres 5432/udp # POSTGRES -fax 4557/tcp # FAX transmission service (old) -hylafax 4559/tcp # HylaFAX client-server protocol (new) -noclog 5354/tcp # noclogd with TCP (nocol) -noclog 5354/udp # noclogd with UDP (nocol) -hostmon 5355/tcp # hostmon uses TCP (nocol) -hostmon 5355/udp # hostmon uses TCP (nocol) -ircd 6667/tcp # Internet Relay Chat -ircd 6667/udp # Internet Relay Chat -webcache 8080/tcp # WWW caching service -webcache 8080/udp # WWW caching service -tproxy 8081/tcp # Transparent Proxy -tproxy 8081/udp # Transparent Proxy -mandelspawn 9359/udp mandelbrot # network mandelbrot -amanda 10080/udp # amanda backup services -amandaidx 10082/tcp # amanda backup services -amidxtape 10083/tcp # amanda backup services -isdnlog 20011/tcp # isdn logging system -isdnlog 20011/udp # isdn logging system -vboxd 20012/tcp # voice box system -vboxd 20012/udp # voice box system -binkp 24554/tcp # Binkley -binkp 24554/udp # Binkley -asp 27374/tcp # Address Search Protocol -asp 27374/udp # Address Search Protocol -tfido 60177/tcp # Ifmail -tfido 60177/udp # Ifmail -fido 60179/tcp # Ifmail -fido 60179/udp # Ifmail - -# Local services - diff --git a/n35-skeleton/etc/shadow b/n35-skeleton/etc/shadow deleted file mode 100644 index 67b67c1..0000000 --- a/n35-skeleton/etc/shadow +++ /dev/null @@ -1,13 +0,0 @@ -root::10933:0:99999:7::: -bin:*:10933:0:99999:7::: -daemon:*:10933:0:99999:7::: -adm:*:10933:0:99999:7::: -lp:*:10933:0:99999:7::: -sync:*:10933:0:99999:7::: -shutdown:*:10933:0:99999:7::: -halt:*:10933:0:99999:7::: -uucp:*:10933:0:99999:7::: -operator:*:10933:0:99999:7::: -ftp:*:10933:0:99999:7::: -nobody:*:10933:0:99999:7::: -default::10933:0:99999:7::: diff --git a/n35-skeleton/home/ftp/.empty b/n35-skeleton/home/ftp/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/home/ftp/.empty +++ /dev/null diff --git a/n35-skeleton/lib/.empty b/n35-skeleton/lib/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/lib/.empty +++ /dev/null diff --git a/n35-skeleton/mnt/.empty b/n35-skeleton/mnt/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/mnt/.empty +++ /dev/null diff --git a/n35-skeleton/opt/.empty b/n35-skeleton/opt/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/opt/.empty +++ /dev/null diff --git a/n35-skeleton/proc/.empty b/n35-skeleton/proc/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/proc/.empty +++ /dev/null diff --git a/n35-skeleton/root/.bash_history b/n35-skeleton/root/.bash_history deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/root/.bash_history +++ /dev/null diff --git a/n35-skeleton/root/.bash_logout b/n35-skeleton/root/.bash_logout deleted file mode 100644 index 77ef1f9..0000000 --- a/n35-skeleton/root/.bash_logout +++ /dev/null @@ -1,7 +0,0 @@ -# ~/.bash_logout: executed by bash(1) when login shell exits. - -# when leaving the console clear the screen to increase privacy - -case "`tty`" in - /dev/tty[0-9]*) clear -esac diff --git a/n35-skeleton/root/.bash_profile b/n35-skeleton/root/.bash_profile deleted file mode 100644 index 27bf149..0000000 --- a/n35-skeleton/root/.bash_profile +++ /dev/null @@ -1,15 +0,0 @@ -# .bash_profile - -export PATH=\ -/bin:\ -/sbin:\ -/usr/bin:\ -/usr/sbin:\ -/usr/bin/X11:\ -/usr/local/bin - -umask 022 - -if [ -f ~/.bashrc ]; then - source ~/.bashrc -fi diff --git a/n35-skeleton/root/.empty b/n35-skeleton/root/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/root/.empty +++ /dev/null diff --git a/n35-skeleton/sbin/.empty b/n35-skeleton/sbin/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/sbin/.empty +++ /dev/null diff --git a/n35-skeleton/sys/.empty b/n35-skeleton/sys/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/sys/.empty +++ /dev/null diff --git a/n35-skeleton/tmp/.empty b/n35-skeleton/tmp/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/tmp/.empty +++ /dev/null diff --git a/n35-skeleton/usr/bin/.empty b/n35-skeleton/usr/bin/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/usr/bin/.empty +++ /dev/null diff --git a/n35-skeleton/usr/lib/.empty b/n35-skeleton/usr/lib/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/usr/lib/.empty +++ /dev/null diff --git a/n35-skeleton/usr/sbin/.empty b/n35-skeleton/usr/sbin/.empty deleted file mode 100644 index e69de29..0000000 --- a/n35-skeleton/usr/sbin/.empty +++ /dev/null diff --git a/n35-skeleton/var/cache b/n35-skeleton/var/cache deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/cache +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/lib/pcmcia b/n35-skeleton/var/lib/pcmcia deleted file mode 120000 index f1fde8c..0000000 --- a/n35-skeleton/var/lib/pcmcia +++ /dev/null @@ -1 +0,0 @@ -../../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/lock b/n35-skeleton/var/lock deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/lock +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/log b/n35-skeleton/var/log deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/log +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/pcmcia b/n35-skeleton/var/pcmcia deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/pcmcia +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/run b/n35-skeleton/var/run deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/run +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/spool b/n35-skeleton/var/spool deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/spool +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file diff --git a/n35-skeleton/var/tmp b/n35-skeleton/var/tmp deleted file mode 120000 index 1431b0e..0000000 --- a/n35-skeleton/var/tmp +++ /dev/null @@ -1 +0,0 @@ -../tmp
\ No newline at end of file |